Zalman HD135 VFD (VlSys Mplay) - Page 3

aXs · 2007-11-26, 18:57

Hi cybrmage, i've made all the tests you asked me. Even with your new driver the controller doesn't work.
On the second log file you asked me i click on the keys "down", "up", "OK", "Vol-", "Mute" and finally "Ch+".

-Manfred-, i'm not using vista, i'm still using XP SP2. When MHC and MP is running, the display show the different information from MHC like OS version, CPU speed, User Logged etc. The display is not freezed on the last information displayed before MP start.

Thanks all for your help.

aXs · 2007-11-26, 19:14

cybrmage ,if that can help you, i prepare a third log file with MHC running (and so remote working but not display). I use the same key sequence as the log file 2.
Thanks again.

cybrmage · 2007-12-03, 18:17

The logs show no data being sent by the device.... which means that it probably only returns data to the software when told to do so....

When I get a chance, I'll see if I can find any further information....

cybrmage · 2007-12-03, 22:41

Ok... I found some more info on this display.... so here is another test driver for you...

Please try it (using the previous instructions... only "session two" is needed) and post some logs for me...

NOTE: the driver does NOT (yet) try to act on any remote commands... it just tries to monitor them (for now)...

Regards,
CybrMage

-Manfred- · 2007-12-04, 16:08

Any news for Vista users? Are those changes in SVN so we Vista users can check the source and compile it? Or do you have any plans to check this (or have a clue what may cause that irresponsiveness on Vista).

Highly appreciated that somebody is trying to help even not having this display!

aXs · 2007-12-04, 18:57

Hi CybrMage, here is the log file made with your new driver. I still using the same key sequence and one key pressed approximatly every 30 seconds.

Regards
aXs

Herr R aus B · 2007-12-23, 14:13

Hello!

I am experiencing the syme problems - I am running XP 64 with the latest VL System drivers for XP 64 and MHC 3034. As for what HMC reports, the display is configured for COM3 and as the manual says it should be 44780 compatible. So I configured the external display plugin to access a 44780 compatible vfd on com port 3 - no effect at all. Same goes for "Joe Dalton's own 44780 driver" plus the fact, that I get a mega crash when trying to access the advanced settings :-)

I shall be very happy when I will be able to use my VFD at some time in the hopefully not so far future :-) Will follow this thread enthusiastically... ;-)

Greets,

Axel

-Manfred- · 2007-12-26, 17:15

Xmas is almost over but here is a present for you - a working driver for this display! I'm using Vista 32b and works OK (64b should work also).

Compiled against latest SVN #16735 but you can try with any version of the MP. Instructions to take this into use are somewhere in this topic.

There is also source attached if someone could add this to SVN.

/m

cybrmage · 2007-12-26, 17:28

Quote:

Originally Posted by -Manfred-

a working driver for this display!

Umm... correct me if i'm wrong... but doesn't this driver do exactly what the driver I posted 3 weeks ago does??? It drives the display... The remote will still note be functional....

The driver I provided already has the remote mapping coded into it... All that is needed is for someone to figure out how the remote buttons are reported by the device.... (I don't have this display, and the methods I tried do not work)... What is needed is for someone with this display to "snoop" on the serial traffic between MHC and the device with something like BusHound...

-Manfred- · 2007-12-26, 17:35

No, it didn't work on Vista. At least two of us couldn't get it to work. We also posted those symptoms here. I did this because we never got the answer for our questions. But maybe you can now check this version source against yours and make the adjustments accordingly. I'll be more than happy to use your driver if it works under Vista.

2007-12-03, 22:41	#24 (permalink)
cybrmage Portal Developer Join Date: May 2007 Posts: 498 Thanks: 1 Thanked 77 Times in 39 Posts Country:	Ok... I found some more info on this display.... so here is another test driver for you... Please try it (using the previous instructions... only "session two" is needed) and post some logs for me... NOTE: the driver does NOT (yet) try to act on any remote commands... it just tries to monitor them (for now)... Regards, CybrMage Last edited by cybrmage; 2007-12-29 at 12:30. Reason: DRIVER REMOVED DUE TO NEW VERSION

2007-12-26, 17:15	#28 (permalink)
-Manfred- Portal Member Join Date: May 2007 Posts: 103 Thanks: 4 Thanked 19 Times in 11 Posts Country:	Xmas is almost over but here is a present for you - a working driver for this display! I'm using Vista 32b and works OK (64b should work also). Compiled against latest SVN #16735 but you can try with any version of the MP. Instructions to take this into use are somewhere in this topic. There is also source attached if someone could add this to SVN. /m Last edited by -Manfred-; 2007-12-29 at 10:35.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zalman VFD in PM	Takke	General Support	3	2008-01-04 12:20
Zalman HD160XT Gehäuse Diskusion	Muschi	Hardware	10	2007-12-29 17:18
Set-up Zalman HD160XT Remote	Giorgio_ap	Support	4	2007-07-05 11:44
Zalman HD160 advice	aarond	Hardware Selection Help	13	2007-01-12 08:06
Problems with Zalman HD160	steviweavi	HTPC Projects	6	2006-06-09 14:46

2007-12-03, 18:17	#23 (permalink)
cybrmage Portal Developer Join Date: May 2007 Posts: 498 Thanks: 1 Thanked 77 Times in 39 Posts Country:	The logs show no data being sent by the device.... which means that it probably only returns data to the software when told to do so.... When I get a chance, I'll see if I can find any further information....

2007-12-04, 16:08	#25 (permalink)
-Manfred- Portal Member Join Date: May 2007 Posts: 103 Thanks: 4 Thanked 19 Times in 11 Posts Country:	Any news for Vista users? Are those changes in SVN so we Vista users can check the source and compile it? Or do you have any plans to check this (or have a clue what may cause that irresponsiveness on Vista). Highly appreciated that somebody is trying to help even not having this display!

2007-12-23, 14:13	#27 (permalink)
Herr R aus B Portal Member Join Date: Dec 2007 Location: Berlin Age: 44 Posts: 79 Thanks: 2 Thanked 2 Times in 2 Posts Country: My System	Hello! I am experiencing the syme problems - I am running XP 64 with the latest VL System drivers for XP 64 and MHC 3034. As for what HMC reports, the display is configured for COM3 and as the manual says it should be 44780 compatible. So I configured the external display plugin to access a 44780 compatible vfd on com port 3 - no effect at all. Same goes for "Joe Dalton's own 44780 driver" plus the fact, that I get a mega crash when trying to access the advanced settings :-) I shall be very happy when I will be able to use my VFD at some time in the hopefully not so far future :-) Will follow this thread enthusiastically... ;-) Greets, Axel

2007-12-26, 17:35	#30 (permalink)
-Manfred- Portal Member Join Date: May 2007 Posts: 103 Thanks: 4 Thanked 19 Times in 11 Posts Country:	No, it didn't work on Vista. At least two of us couldn't get it to work. We also posted those symptoms here. I did this because we never got the answer for our questions. But maybe you can now check this version source against yours and make the adjustments accordingly. I'll be more than happy to use your driver if it works under Vista.