MCE Clone Remote Problem

atkellyx · 2008-04-17, 02:05

Hi all

I am having trouble getting a working remote on MP. I have bought a Digitech MCE clone IR remote which I thought at the time I was buying an MCE remote. Dumb me.

It works perfectly in Windows XP SP2 with all buttons working as expected with nothing from me other than plugging it in to the usb port.

MP however just doesn't seem to see it. It accepts some windows keystrokes from it (up, down, left, right, OK) with or without the "use MCE" option checked in remotes configuration. Checking the option makes no difference at all.

Since it works fine in Windows land, I am assuming that it's identical to a genuine MCE remote but am more than happy being told it's not and it won't work. That way I can bin it and not waste any more time.

I have tried the alternatice MCE drivers and the MCE replacement plug in with no improvement.

Thanks in advance. Any help much appreciated.

Paranoid Delusion · 2008-04-17, 10:40

Hi moving post to remote section, not much use in MP2 part of forum.

Cannot find anything on net about this remote, try as hid device or possibly x10.

In device manager, what is it recognised as.

Marcusb · 2008-04-17, 16:13

1st off, welcome to MP

2nd, there are a number of similar posts around now, with the increasing number of clones becomming available.

I understand that you can usually get support added, but you need to follow some steps. try enabling extensive logging in the MCE remote section of MP, then post the logs back here. If that isn't enough, try doing some searches as RTV (who usually adds this support) has posted the steps a few times recently.

Cheers,
Marcus.

Melloware · 2008-04-17, 18:07

I am interested to get your remote working in my program Intelliremote. Do you mind looking at this post and trying your remote? You can email me at info@melloware.com or post your results on my site.

http://forum.melloware.com/viewtopic.php?f=1&t=6180

atkellyx · 2008-04-18, 00:51

Hi and thanks for all the responses.

1. I think that MP is completely unaware this remote exists. It appers in the device manager as a generic HID USB mouse and a generic USB HID keyboard.

MP logs nothing about it, with any of the remote types selected with/without extended logging. Yet some virtual keystrokes are received by MP? I don't understand.

I wondered how MP chooses the HID to use? If I take out my mouse and keyboard and left the remote as the only HID, would MP use it and everything work? Not a workable solution though, can't type email with a remote control, just a curious thought.

I was going to give up and buy a genuine MCE remote as I'm had a saga with this remote business (I had a running vDR on Debian for years and it started acting up (turns out my baby sucking on a the IR Receiver was the cause)) but I rebuilt, migrated to Ubuntu 6, then 7, then 8 and each version has had something wrong with it that meant one or another of the devices I use was unable to work. Anyway, finally turned to MP and was very excited but still can't get a $$%#()! remote working. ahahahahahaha. There's definitely a lesson here, buy supported hardware. "But then nothing would get added to the supported list" I say to myself. Anyway I will persevere with this remote now and help get it working for others if possible.

2. REgarding teh Intelliremote, I will have a go when I can and report.

I am going away for the next few days so won't be trying anything until mid next week.

I'll keep you posted.

Anthony

2008-04-17, 02:05	#1 (permalink)
atkellyx Portal User Join Date: Apr 2008 Location: Darwin, NT Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	MCE Clone Remote Problem Hi all I am having trouble getting a working remote on MP. I have bought a Digitech MCE clone IR remote which I thought at the time I was buying an MCE remote. Dumb me. It works perfectly in Windows XP SP2 with all buttons working as expected with nothing from me other than plugging it in to the usb port. MP however just doesn't seem to see it. It accepts some windows keystrokes from it (up, down, left, right, OK) with or without the "use MCE" option checked in remotes configuration. Checking the option makes no difference at all. Since it works fine in Windows land, I am assuming that it's identical to a genuine MCE remote but am more than happy being told it's not and it won't work. That way I can bin it and not waste any more time. I have tried the alternatice MCE drivers and the MCE replacement plug in with no improvement. Thanks in advance. Any help much appreciated.

2008-04-17, 10:40	#2 (permalink)
Paranoid Delusion Super Moderator Join Date: Jun 2005 Location: Cheshire UK Posts: 5,932 Thanks: 106 Thanked 179 Times in 161 Posts Country: My System	Hi moving post to remote section, not much use in MP2 part of forum. Cannot find anything on net about this remote, try as hid device or possibly x10. In device manager, what is it recognised as. __________________ Ray\PD Check your codecs are fine with Filmerit. XP\Vista known issues FOR FULL SUPPORT PLEASE GIVE USER SPECIFICATIONS AND RELEVANT LOG's as per HERE

2008-04-17, 18:07	#4 (permalink)
Melloware Portal Member Join Date: Oct 2007 Posts: 60 Thanks: 7 Thanked 1 Time in 1 Post Country:	I am interested to get your remote working in my program Intelliremote. Do you mind looking at this post and trying your remote? You can email me at info@melloware.com or post your results on my site. http://forum.melloware.com/viewtopic.php?f=1&t=6180 __________________ Melloware "Remote problems try IRServerSuite, if that does not satisfy your needs look at Intelliremote"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zalman 160XT + LCD in Clone Mode and different resolution problem - my solution.	xisio	Support	4	2008-06-14 15:12
Problem with MCE IR receiver, Xbox 360 remote, & XP Pro (Non MCE)	yankee982	General	0	2007-02-23 21:51
New MCE clone:	hani	Skins	6	2006-12-28 00:51
Another MCE-Clone - Download available	Inker	Skins	114	2006-11-26 23:09
Coolermaster Remote / MCE Clone?	iSuc	General Support	0	2006-07-17 14:31

2008-04-17, 16:13	#3 (permalink)
Marcusb Super Moderator Join Date: Feb 2005 Location: Melbourne Posts: 1,909 Thanks: 61 Thanked 27 Times in 27 Posts Country: My System	1st off, welcome to MP 2nd, there are a number of similar posts around now, with the increasing number of clones becomming available. I understand that you can usually get support added, but you need to follow some steps. try enabling extensive logging in the MCE remote section of MP, then post the logs back here. If that isn't enough, try doing some searches as RTV (who usually adds this support) has posted the steps a few times recently. Cheers, Marcus.

2008-04-18, 00:51	#5 (permalink)
atkellyx Portal User Join Date: Apr 2008 Location: Darwin, NT Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	Hi and thanks for all the responses. 1. I think that MP is completely unaware this remote exists. It appers in the device manager as a generic HID USB mouse and a generic USB HID keyboard. MP logs nothing about it, with any of the remote types selected with/without extended logging. Yet some virtual keystrokes are received by MP? I don't understand. I wondered how MP chooses the HID to use? If I take out my mouse and keyboard and left the remote as the only HID, would MP use it and everything work? Not a workable solution though, can't type email with a remote control, just a curious thought. I was going to give up and buy a genuine MCE remote as I'm had a saga with this remote business (I had a running vDR on Debian for years and it started acting up (turns out my baby sucking on a the IR Receiver was the cause)) but I rebuilt, migrated to Ubuntu 6, then 7, then 8 and each version has had something wrong with it that meant one or another of the devices I use was unable to work. Anyway, finally turned to MP and was very excited but still can't get a $$%#()! remote working. ahahahahahaha. There's definitely a lesson here, buy supported hardware. "But then nothing would get added to the supported list" I say to myself. Anyway I will persevere with this remote now and help get it working for others if possible. 2. REgarding teh Intelliremote, I will have a go when I can and report. I am going away for the next few days so won't be trying anything until mid next week. I'll keep you posted. Anthony