MSI TV@nywhere Issue - Page 2

eventone · 2007-07-27, 00:13

Yeap, I installed the MCE encoder and rebooted... gonna post that log now.

Its posted under "Event". I think its no longer in your original version, as I tried to adapt parts of it to my card, since it wasnt working...

ronilse · 2007-07-27, 00:30

Hi,
Have sent you a PM with link to a new def file.

Regards
Roy

eventone · 2007-07-27, 00:42

Thanks, but it didn't work...

it wasn't even detected...

I posted a new configuration.log there, if it helps you figuring it out.

Really thanks for all your help

ronilse · 2007-07-27, 00:52

Hi,
Forgot to remove something when copy & past re download & test again.

Regards
Roy

eventone · 2007-07-27, 00:58

Sill can't detect it...

I think I'll try again tomorrow, heheh. Been so long without it, I've gotten used to not having it, lol

Thanks

ronilse · 2007-07-27, 01:03

Hi,
Upped a new one for you, i'll hit the bed too now

Regards
Roy

eventone · 2007-07-27, 15:13

It worked!!!

I had to change a few settings, namely the chip name (mine's the 713x and not the 7134) and one of the pins to get it recognized, but for the first time in MONTHS I was able to use my tv card with mediaportal!!!

I'm so happy! weeee!

The image freezes if I try to use timeshift or record tv, but its working for the first time! Thank you so much!

These were the settings I used:
<capturecard commercialname="MSI TV@nywhere Plus MainConcept" capturename="Philips Cap713x Video Capture" devid="ven_1131&dev_7133&subsys_62311462&a mp;rev_d1">
<capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"/>
<tv>
<interface cat="mux" video="" audio="" mpeg2="0"/>
<filters>
<filter cat="tvtuner" name="Philips Cap713x TVTuner Silicon" checkdevice="true"/>
<filter cat="tvaudio" name="Philips Cap713x TVAudio" checkdevice="true"/>
<filter cat="crossbar" name="Philips Cap713x Crossbar" checkdevice="true"/>
<filter cat="capture" name="Philips Cap713x Video Capture" checkdevice="true"/>
<filter cat="mux" name="MainConcept (MCE) MPEG Encoder" checkdevice="false"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="0" sinkfilter="mux" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="3" sinkfilter="mux" sinkpin="1"/>
</connections>
</tv>
</capturecard>

ronilse · 2007-07-27, 21:59

Hi,
Nice to hear, what drivers (version) did you use for your card?

Regards
Roy

eventone · 2007-07-27, 22:06

I'm not sure, they were from january/february, at least. I can check the version when i get back home (away for the weekend, heheh) and let you know

eventone · 2007-07-31, 23:05

Now that I have tv working, i have another problem... no sound...

This card uses the line-in feature to get the sound into the soundcard. I was finally able to make a cable to connect that to the internal aux port and it works just fine in MSI's own program.

How do I tell MediaPortal to get the sound from there?

2007-07-27, 00:13	#11 (permalink)
eventone Portal Member Join Date: Feb 2007 Posts: 48 Thanks: 2 Thanked 1 Time in 1 Post Country:	Yeap, I installed the MCE encoder and rebooted... gonna post that log now. Its posted under "Event". I think its no longer in your original version, as I tried to adapt parts of it to my card, since it wasnt working... Last edited by eventone; 2007-07-27 at 00:18. Reason: Automerged Doublepost

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MSI TV@nywhere	sc2sick	General Support	2	2008-01-22 10:35
MSI TV@nywhere Plus Problem... exist on CaptureCardDefinitions.xml... but not work	deaminium	Installation, configuration support	0	2007-03-16 19:48
New Card: MSI TV @nywhere Duo	Macfox	General Support	9	2006-05-01 22:50
MSI TV @nywhere-Plus	epinFLA	General Support	0	2006-01-25 20:26
is MSI TV@nywhere Plus good hardware?	wrenhal	Hardware Selection Help	2	2005-11-25 06:10

2007-07-27, 00:30	#12 (permalink)
ronilse Portal Tester Join Date: Jul 2005 Posts: 3,126 Thanks: 18 Thanked 84 Times in 70 Posts Country: My System	Hi, Have sent you a PM with link to a new def file. Regards Roy

2007-07-27, 00:42	#13 (permalink)
eventone Portal Member Join Date: Feb 2007 Posts: 48 Thanks: 2 Thanked 1 Time in 1 Post Country:	Thanks, but it didn't work... it wasn't even detected... I posted a new configuration.log there, if it helps you figuring it out. Really thanks for all your help

2007-07-27, 00:52	#14 (permalink)
ronilse Portal Tester Join Date: Jul 2005 Posts: 3,126 Thanks: 18 Thanked 84 Times in 70 Posts Country: My System	Hi, Forgot to remove something when copy & past re download & test again. Regards Roy

2007-07-27, 00:58	#15 (permalink)
eventone Portal Member Join Date: Feb 2007 Posts: 48 Thanks: 2 Thanked 1 Time in 1 Post Country:	Sill can't detect it... I think I'll try again tomorrow, heheh. Been so long without it, I've gotten used to not having it, lol Thanks

2007-07-27, 01:03	#16 (permalink)
ronilse Portal Tester Join Date: Jul 2005 Posts: 3,126 Thanks: 18 Thanked 84 Times in 70 Posts Country: My System	Hi, Upped a new one for you, i'll hit the bed too now Regards Roy

2007-07-27, 15:13	#17 (permalink)
eventone Portal Member Join Date: Feb 2007 Posts: 48 Thanks: 2 Thanked 1 Time in 1 Post Country:	It worked!!! I had to change a few settings, namely the chip name (mine's the 713x and not the 7134) and one of the pins to get it recognized, but for the first time in MONTHS I was able to use my tv card with mediaportal!!! I'm so happy! weeee! The image freezes if I try to use timeshift or record tv, but its working for the first time! Thank you so much! These were the settings I used: <capturecard commercialname="MSI TV@nywhere Plus MainConcept" capturename="Philips Cap713x Video Capture" devid="ven_1131&dev_7133&subsys_62311462&a mp;rev_d1"> <capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"/> <tv> <interface cat="mux" video="" audio="" mpeg2="0"/> <filters> <filter cat="tvtuner" name="Philips Cap713x TVTuner Silicon" checkdevice="true"/> <filter cat="tvaudio" name="Philips Cap713x TVAudio" checkdevice="true"/> <filter cat="crossbar" name="Philips Cap713x Crossbar" checkdevice="true"/> <filter cat="capture" name="Philips Cap713x Video Capture" checkdevice="true"/> <filter cat="mux" name="MainConcept (MCE) MPEG Encoder" checkdevice="false"/> </filters> <connections> <connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/> <connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/> <connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"/> <connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/> <connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/> <connection sourcefilter="capture" sourcepin="0" sinkfilter="mux" sinkpin="0"/> <connection sourcefilter="capture" sourcepin="3" sinkfilter="mux" sinkpin="1"/> </connections> </tv> </capturecard>

2007-07-27, 21:59	#18 (permalink)
ronilse Portal Tester Join Date: Jul 2005 Posts: 3,126 Thanks: 18 Thanked 84 Times in 70 Posts Country: My System	Hi, Nice to hear, what drivers (version) did you use for your card? Regards Roy

2007-07-27, 22:06	#19 (permalink)
eventone Portal Member Join Date: Feb 2007 Posts: 48 Thanks: 2 Thanked 1 Time in 1 Post Country:	I'm not sure, they were from january/february, at least. I can check the version when i get back home (away for the weekend, heheh) and let you know

2007-07-31, 23:05	#20 (permalink)
eventone Portal Member Join Date: Feb 2007 Posts: 48 Thanks: 2 Thanked 1 Time in 1 Post Country:	Now that I have tv working, i have another problem... no sound... This card uses the line-in feature to get the sound into the soundcard. I was finally able to make a cable to connect that to the internal aux port and it works just fine in MSI's own program. How do I tell MediaPortal to get the sound from there?