The dev that created that plugin has not been seen sense 2013.
MyVolume is the cause of the issues and would suggest not using the plugin. I would guess there are enough changes in the newer MP that this plugin does not work with it.
On a side note (after reading all your logs)
Are you aware you have a USB driver issue? Shows up in System Events
"5/1/2015 7:31:12 AM";"hcmon";"(0)";"Warning";"Detected unrecognized USB driver (\Driver\usbfilter).";"2147483648"
If anyone ever experiences the above, I found a fix. Removing and reinstalling MP-TVSeries fixed it. It must have gotten corrupted during the reinstall of MP. I also had to do the same with TRAKT which had some issues too that were not apparent at the time. All is well once again. :cool:
If anyone ever experiences the above, I found a fix. Removing and reinstalling MP-TVSeries fixed it. It must have gotten corrupted...
After much trial and error and comparing this computer with another that was working, I finally found out that Fanarthandler...
Since I played around with all the settings as per the previous posts and despite putting everything back to how it was, as far as I can tell, now when my HTPC wakes up to make a recording it no longer does so in away mode. I will probably do a restore from a backup in the hope that that will resolve the issue.:mad:
Since I played around with all the settings as per the previous posts and despite putting everything back to how it was, as far as...
Generally standby is working well on My Mp 1.32 x64 pre set up. I just have one issue, which was also present on earlier x86...