Hauppauge HVR-1110 (Philips) - a step forward - Page 2

feanorknd · 2007-10-23, 11:50

Quote:

Originally Posted by NOiSE

Feanorknd:

if you download and extract the MCE CD you have to install the drivers exactly as recommended on the guide page.

then you have to install the MCE encoder which is located in MCE_soft_encoder subfolder of the CD:

After that, you have to install MediaPortal and configure the card as described in my topic above.

I hope it works for you

I hope too....

Thanks so much Noise... this weekend I will try.

Fabolus · 2007-10-25, 23:18

Thank you NOISE!

Stouf · 2007-11-14, 20:33

Hi NOISE,

Houston I've a problem

I did everything exactly like you did, my HVR-1110 works now in MP (analog TV is just slow but i think it's another problem), but MP crashes each time I turn off the tuner (manually or by exiting MyTV plugin).

Does this happen to something else ? I just formated the HTPC and made a fresh install, but i've no luck with this card I think.
You can see my entire post in the support section : http://forum.team-mediaportal.com/st...tv-t31182.html

But I must say a big THANK YOU NOISE !, for getting this *"@%& card to work with MP

bywood1969 · 2008-04-08, 19:09

Hi, been trying to get my HVR-1100 working for ages. Digital OK but nothing on the analogue side. Read your article with interest and tried all steps (used 4.1 Hauppage drivers and took the MCE soft encoder from the MCE CD) but still getting a problem on the analogue tuning.

In the TV log its complaining that there is "No audio compressor filter found".

I'm running the latest TV server/client (SVN 18566) - any ideas how I overcome this issue?

Thanks,

off112 · 2008-05-05, 20:24

Hi, great job :-)
Thanks for the solution for Mediaportal version 0.2.3 RC2 :-)

But how will I do to make this to work with the latest V1.0.0.0 RC1 release?

Thanks again.

Jopen · 2008-06-29, 21:55

Bumping this topic due to MP v.1.0
Cant find the right place to add the code for hvr-1100 capurecard.

Stouf · 2008-07-10, 08:23

Bump again !
I'm still trying to use my HVR-1110 with MP 1.0, still no luck... (unable to create graph)
I tried several hauppauge drivers : 3.1, 4.0, 4.1, 4.2, 4.6.

On a side note, IMO 4.6 drivers are the best considering the analog part (in K!TV)

Thanks

2007-10-25, 23:18	#12 (permalink)
Fabolus Portal Member Join Date: Mar 2006 Location: Italy Posts: 23 Thanks: 0 Thanked 1 Time in 1 Post Country:	Thank you NOISE! __________________ Taf209

2008-04-08, 19:09	#14 (permalink)
bywood1969 Portal User Join Date: Mar 2008 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Country:	No audio compressor filter found Hi, been trying to get my HVR-1100 working for ages. Digital OK but nothing on the analogue side. Read your article with interest and tried all steps (used 4.1 Hauppage drivers and took the MCE soft encoder from the MCE CD) but still getting a problem on the analogue tuning. In the TV log its complaining that there is "No audio compressor filter found". I'm running the latest TV server/client (SVN 18566) - any ideas how I overcome this issue? Thanks,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hauppauge HVR 1110 card not found	siedrosat	General Support	17	2007-10-20 12:52
Hauppauge hrv-1110	lorenzo76	Installation, configuration support	16	2007-10-20 12:51
FM-Radio auf Haupauge HVR 1110	Dandy	Media Portal - Support	0	2007-07-16 12:27
Using Firefly remote - Step by step instructions needed	shogun	General Support	5	2006-12-18 23:16
big step forward	ratho	Media Portal - Allgemeines	0	2006-07-14 17:26

2007-11-14, 20:33	#13 (permalink)
Stouf Portal Member Join Date: Aug 2007 Age: 29 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	Hi NOISE, Houston I've a problem I did everything exactly like you did, my HVR-1110 works now in MP (analog TV is just slow but i think it's another problem), but MP crashes each time I turn off the tuner (manually or by exiting MyTV plugin). Does this happen to something else ? I just formated the HTPC and made a fresh install, but i've no luck with this card I think. You can see my entire post in the support section : http://forum.team-mediaportal.com/st...tv-t31182.html But I must say a big THANK YOU NOISE !, for getting this *"@%& card to work with MP

2008-05-05, 20:24	#15 (permalink)
off112 Portal User Join Date: Dec 2006 Age: 30 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Hi, great job :-) Thanks for the solution for Mediaportal version 0.2.3 RC2 :-) But how will I do to make this to work with the latest V1.0.0.0 RC1 release? Thanks again.

2008-06-29, 21:55	#16 (permalink)
Jopen Portal User Join Date: Oct 2007 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Bumping this topic due to MP v.1.0 Cant find the right place to add the code for hvr-1100 capurecard.

2008-07-10, 08:23	#17 (permalink)
Stouf Portal Member Join Date: Aug 2007 Age: 29 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	Bump again ! I'm still trying to use my HVR-1110 with MP 1.0, still no luck... (unable to create graph) I tried several hauppauge drivers : 3.1, 4.0, 4.1, 4.2, 4.6. On a side note, IMO 4.6 drivers are the best considering the analog part (in K!TV) Thanks