MediaPortal SVN-Snapshot:-05-23-2008 22-51h - Revision:19158

MediaPortal-Bot · 2008-05-23, 22:55

Infos:

These Subversion-snaps are compiled automatically, every week on friday.
They are not pre-tested, so please use the backup option from time to time.
If you'd like the bleeding edge code and don't mind the inherent risks, upgrade to the snapshot releases as they become available.
If stability is important to you, you might want to stay with the fully-tested releases.

Report Issues / Bugs:

Before you start an bugreport, make sure that you system meets the ::requirements::
After you checked the requirements, take a look at our ::Bugtracker::, to find out if your issue has allready been reported.
Roadmap/Changelog: MediaPortal 1 - TV-Server - Installers
If the Problem is not known yet, please have a look at the correct Bugreport forum.
- Issues with MediaPortal have to be reported in the MediaPortal Bugreport forums.
  Make sure you follow the Guideline, or the thread will be deleted.
- If you use the TV-Server, then post any TV related issue in the TV-Server Bugreport Forums.
  Make sure you follow the Guideline, or the thread will be deleted.

How to install MediaPortal SVN-Snapshots in short:

Install MediaPortal 1.0 RC1, not necessary if already done
Run the Snapshot-Installer. You should create a backup.
Run Configure. Sometimes the settings and database versions change from build to build, so you have to reconfigure your TV for example
Hopefully enjoy the new version
If not, restore your old files and you will have the former version back.

You can find more infos on SVN-snaps and how to install them in this Wiki-guide

MediaPortal-Bot · 2008-05-23, 22:55

===> DOWNLOAD <===

This thread is open to everyone to provide feedback for this particular snapshot.
If you found or confirm a bug please still open a single thread with full details in the related Bugsection. See first post for details.

ikarmona · 2008-05-24, 00:53

Master/Slave issue doesn't seem to have been fixed. I installed a Master TV Server and it worked but after installing a Slave Server I see the card of the slave srv as Type=Unknown in the TV Server Configuration.

I am running the 19158 revision on both servers.

Did I miss something? Or was I supposed to do something special before installing the svn build?

rtv · 2008-05-24, 00:58

Quote:

Originally Posted by ikarmona

Master/Slave issue doesn't seem to have been fixed. I installed a Master TV Server and it worked but after installing a Slave Server I see the card of the slave srv as Type=Unknown in the TV Server Configuration.

You should have received a message that master-slave setups are not supported any longer.

yardern · 2008-05-24, 04:44

MediaPortal is now working great!

Thanks for the great work!

But since I am not a native English speaker, I am using Core CC Parser as "TV post processing" for Closed Caption in North America. They are working together, very stable, reliable and accurate. If I switch channels, MP will crash after about 4 times of switching, but still at first 3 times MP works great with Closed Caption.

Off course MP is working very well without Core CC Parser, it only crashes once after about 30 times of channel switching.

What the reason could be please?

I have attached the log files and the source code of Core CC Parser, in case any body could take a look.

Thanks

heerfordt · 2008-05-24, 10:48

Hi

I have just created a bugfix for the tvserver, that would be great to have in SVN.

https://sourceforge.net/tracker/?fun...roup_id=107397

/H.

hirscho · 2008-05-24, 10:49

Power scheduler is not working for me anymore.

I set "only allow standby between" to 0 - 24 o'clock, but power scheduler does not allow the system to go into standby. Last SVN worked well with the same settings.

ikarmona · 2008-05-24, 10:56

Quote:

Originally Posted by rtv

Quote:

Originally Posted by ikarmona

Master/Slave issue doesn't seem to have been fixed. I installed a Master TV Server and it worked but after installing a Slave Server I see the card of the slave srv as Type=Unknown in the TV Server Configuration.

You should have received a message that master-slave setups are not supported any longer.

So, If I have two systems each with a TV card, I need to install two Master TV Servers? That is, do I need to install SQL on both and install them each with its own db and serve their own cards to the network? But then a client will see only the TV server which it is connected to and will not have a pool of TV cards to choose from. Am I correct?

rtv · 2008-05-24, 12:21

Quote:

Originally Posted by hirscho

Power scheduler is not working for me anymore.

I set "only allow standby between" to 0 - 24 o'clock, but power scheduler does not allow the system to go into standby. Last SVN worked well with the same settings.

Please read this.

bigboots · 2008-05-24, 13:27

Hello I installed the lastest svn snapshot and have only found 1 problem so far ( for me ). Can't find the daemon tools option in the config. Want to be able to mount the img, miso files I have. Any ideas? ( Thank all of you so much for all the hard work you guys & girls put into making MediaPortal such a great experience )

2008-05-23, 22:55	#1 (permalink)
MediaPortal-Bot Worlds greatest bot! Join Date: Mar 2007 Posts: 847 Thanks: 0 Thanked 49 Times in 48 Posts Country:	MediaPortal SVN-Snapshot:-05-23-2008 22-51h - Revision:19158 Infos: These Subversion-snaps are compiled automatically, every week on friday. They are not pre-tested, so please use the backup option from time to time. If you'd like the bleeding edge code and don't mind the inherent risks, upgrade to the snapshot releases as they become available. If stability is important to you, you might want to stay with the fully-tested releases. Report Issues / Bugs: Before you start an bugreport, make sure that you system meets the ::requirements:: After you checked the requirements, take a look at our ::Bugtracker::, to find out if your issue has allready been reported. Roadmap/Changelog: MediaPortal 1 - TV-Server - Installers If the Problem is not known yet, please have a look at the correct Bugreport forum. Issues with MediaPortal have to be reported in the MediaPortal Bugreport forums. Make sure you follow the Guideline, or the thread will be deleted. If you use the TV-Server, then post any TV related issue in the TV-Server Bugreport Forums. Make sure you follow the Guideline, or the thread will be deleted. How to install MediaPortal SVN-Snapshots in short: Install MediaPortal 1.0 RC1, not necessary if already done Run the Snapshot-Installer. You should create a backup. Run Configure. Sometimes the settings and database versions change from build to build, so you have to reconfigure your TV for example Hopefully enjoy the new version If not, restore your old files and you will have the former version back. You can find more infos on SVN-snaps and how to install them in this Wiki-guide Last edited by high; 2008-05-23 at 22:59.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MediaPortal SVN-Snapshot:-05-16-2008 23-38h - Revision:19127.rar	MediaPortal-Bot	untested MediaPortal and TV-Server 1.0 RC1 svn-builds	74	2008-05-26 11:35
MediaPortal SVN-Snapshot: 03-23-2008 05-06h - Revision:18207	MediaPortal-BOT	'Nightly Builds' - v0.2.3.0 - final	6	2008-03-25 21:42
MediaPortal SVN-Snapshot: 03-22-2008 05-06h - Revision:18153	MediaPortal-BOT	'Nightly Builds' - v0.2.3.0 - final	16	2008-03-23 04:08
MediaPortal SVN-Snapshot: 02-22-2008 05-04h - Revision:17454	MediaPortal-BOT	'Nightly Builds' - v0.2.3.0 - final	2	2008-02-25 07:59
MediaPortal SVN-Snapshot: 01-22-2008 05-04h - Revision:17122	MediaPortal-BOT	'Nightly Builds' - v0.2.3.0 - final	14	2008-01-22 14:06

2008-05-23, 22:55	#2 (permalink)
MediaPortal-Bot Worlds greatest bot! Join Date: Mar 2007 Posts: 847 Thanks: 0 Thanked 49 Times in 48 Posts Country:	===> DOWNLOAD <=== This thread is open to everyone to provide feedback for this particular snapshot. If you found or confirm a bug please still open a single thread with full details in the related Bugsection. See first post for details.

2008-05-24, 00:53	#3 (permalink)
ikarmona Portal Member Join Date: Jan 2007 Age: 47 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	Master/Slave issue doesn't seem to have been fixed. I installed a Master TV Server and it worked but after installing a Slave Server I see the card of the slave srv as Type=Unknown in the TV Server Configuration. I am running the 19158 revision on both servers. Did I miss something? Or was I supposed to do something special before installing the svn build?

2008-05-24, 10:48	#6 (permalink)
heerfordt Portal Member Join Date: Feb 2007 Posts: 80 Thanks: 0 Thanked 7 Times in 3 Posts	Hi I have just created a bugfix for the tvserver, that would be great to have in SVN. https://sourceforge.net/tracker/?fun...roup_id=107397 /H.

2008-05-24, 13:27	#10 (permalink)
bigboots Portal User Join Date: Jun 2007 Age: 34 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hello I installed the lastest svn snapshot and have only found 1 problem so far ( for me ). Can't find the daemon tools option in the config. Want to be able to mount the img, miso files I have. Any ideas? ( Thank all of you so much for all the hard work you guys & girls put into making MediaPortal such a great experience )