MediaPortal SVN-Snapshot:-05-23-2008 22-51h - Revision:19158

[royne]

MP works perfect for all off my channels except one special channel. After switching to this channels i can se the chanals for some seconds. I get the message "Back to prevous chanels: can not start timeshift, chanels is coded".
I use FloppyDVB-S2 with a CAM module.

If i change the "Wait for unscrambled channels" parameter to 60Sec, i can actualy watch the chanel for 60 sec, after the message apears. It is not possible to clik yes or no in this dialog.

If someon wants to look at this problem you can find logfiles here:
BUG: Some chanels don't decrypt


I also have problem with Radio Channels switching, somtimes it takes 30 second before the new channel sound arrives, during this period i can listen to the old chanal. Attached is logfiles where i switch radiochanals several times.


roynes

[Dale#1976]

Originally Posted by ikarmona

So, If I have two systems each with a TV card, I need to install two Master TV Servers? That is, do I need to install SQL on both and install them each with its own db and serve their own cards to the network? But then a client will see only the TV server which it is connected to and will not have a pool of TV cards to choose from. Am I correct?

Gee, I just setup the first server last week with the hopes of having a second one with a second TV card setup today. Does it not make sense to have separate servers, particularly if you are recording HD programming. Is there any workaround so all servers and clients can see the both servers? Can you get two servers to save to one set of dbases? Is there any plan to enable this? Sounds like the previous versions offered it.

Been using MP stand alone for a couple years now. It runs circles around MS MediaCenter and all the others I've tried. Thanks to all the programmers!!! We all certainly appreciate the time and efforts



Dale

[disaster123]

@Rudi99
I've added all details to my profile - i hope that's enough. I don't think, that this is a timezone problem. The clock in MP shows the correct time. But the green triangles are not on the right position.

I've additionally the same problem as binary64:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.ComponentModel.Win32Exception: Der Vorgang wurde erfolgreich beendet
at System.Windows.Forms.Form.UpdateLayered()
at System.Windows.Forms.Form.OnHandleCreated(EventArg s e)
at System.Windows.Forms.Control.WmCreate(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Mes sage& m)
at System.Windows.Forms.ContainerControl.WndProc(Mess age& m)
at System.Windows.Forms.Form.WmCreate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
MediaPortal
Assembly Version: 0.9.2.39268
Win32 Version: 0.9.2.19158
CodeBase: file:///C:/Programme/Team%20MediaPortal/MediaPortal/MediaPortal.exe
----------------------------------------
Core
Assembly Version: 0.9.2.39232
Win32 Version: 0.9.2.19158
CodeBase: file:///C:/Programme/Team%20MediaPortal/MediaPortal/Core.DLL
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.DirectX.Direct3D
Assembly Version: 1.0.2902.0
Win32 Version: 9.05.132.0000
CodeBase: file:///C:/WINDOWS/assembly/GAC/Microsoft.DirectX.Direct3D/1.0.2902.0__31bf3856ad364e35/Microsoft.DirectX.Direct3D.dll
----------------------------------------
Utils
Assembly Version: 2.2.6.39227
Win32 Version: 2.2.6.19158
CodeBase: file:///C:/Programme/Team%20MediaPortal/MediaPortal/Utils.DLL
----------------------------------------
System.ServiceProcess
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.ServiceProcess/2.0.0.0__b03f5f7f11d50a3a/System.ServiceProcess.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
RemotePlugins
Assembly Version: 0.9.2.39241
Win32 Version: 0.9.2.19158
CodeBase: file:///C:/Programme/Team%20MediaPortal/MediaPortal/RemotePlugins.DLL
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.1433 (REDBITS.050727-1400)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
MediaPortal.Support
Assembly Version: 0.9.2.39224
Win32 Version: 0.9.2.19158
CodeBase: file:///C:/Programme/Team%20MediaPortal/MediaPortal/MediaPortal.Support.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

[TheMerovingian]

tv.log attached.
nothing in the eventviewer?!

2008-05-26 20:33:57.015625 [4]: PowerScheduler: Entering shutdown Hibernate ; forced: False -- kick off shutdown thread
2008-05-26 20:33:57.015625 [Powerscheduler Suspender]: PowerScheduler: Shutdown thread is running: Hibernate, force: False
2008-05-26 20:33:57.015625 [Powerscheduler Suspender]: PowerScheduler: Informing handlers about UserShutdownNow
2008-05-26 20:33:57.093750 [Powerscheduler Suspender]: PowerScheduler: Shutdown is allowed False ; forced: False
2008-05-26 20:34:25.625000 [4]: PowerScheduler: Entering shutdown Hibernate ; forced: False -- kick off shutdown thread
2008-05-26 20:34:25.640625 [Powerscheduler Suspender]: PowerScheduler: Shutdown thread is running: Hibernate, force: False
2008-05-26 20:34:25.640625 [Powerscheduler Suspender]: PowerScheduler: Informing handlers about UserShutdownNow
2008-05-26 20:34:25.750000 [Powerscheduler Suspender]: PowerScheduler: Shutdown is allowed False ; forced: False
2008-05-26 20:34:35.515625 [PowerEventThread]: TV service PowerEventThread 49343
2008-05-26 20:34:35.515625 [PowerEventThread]: TV service PowerEventThread 49343

[rtv]

Originally Posted by paradroid2

Installed it -> DVD title menu navigation didn't work anymore
reverted to previous svn -> DVD navigation works again

No logs,
no system specs (incl. nav and codecs),
no DVD name

[rtv]

Originally Posted by Dale#1976

Gee, I just setup the first server last week with the hopes of having a second one with a second TV card setup today. Does it not make sense to have separate servers, particularly if you are recording HD programming. Is there any workaround so all servers and clients can see the both servers? Can you get two servers to save to one set of dbases? Is there any plan to enable this? Sounds like the previous versions offered it.

Various servers can use one and the same database server but all need to use a unique database / schema name.

After 1.0 is out there might be efforts to get a multi-server-setup working again but nothing has been decided yet.

[disaster123]

Addon to my last post: the green triangle which marks the actual position in the TV Programm overview timeline - ist about 15 Minutes back.. now it's 22:00 and it marks 21:45...

Sometimes when i'm viewing tv in timeshift modes it jumps back oder the timeshift suddently stops.

[coopers]

Not sure if this is a bug or not - perhaps someone else can confirm the behavior is not just me?

I have the Powerscheduler Plugin for Tv Client enabled.

The checkbox to prevent standby/shutdown unless on the home screen is checked.

However, if I press my shutdown button (on the remote, but the case button does this too) the system enters standby no matter what screen the client is on currently. Even if full screen video is playing.

Anyone else see this behaviour?


edit: I should add that if a recording is in progress that standby is prevented. So that bug in mantis is fixed, this is different..

[Spooky]

This option is only for the automatic shutdown (idle time). Why would you want to prevent standby, if the user deliberately wants to send the machine into standby...?

[disaster123]

The
"************** Exception Text **************
System.ComponentModel.Win32Exception: Der Vorgang wurde erfolgreich beendet
at System.Windows.Forms.Form.UpdateLayered()
at System.Windows.Forms.Form.OnHandleCreated(EventArg s e)
at System.Windows.Forms.Control.WmCreate(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Mes sage& m)
at System.Windows.Forms.ContainerControl.WndProc(Mess age& m)
at System.Windows.Forms.Form.WmCreate(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)"

Error Message always happens after a recording is done or so. Is this Bug already in mentis? It would be nice if i can use MP with the next SVN again - at the moment it is not usable :-(