TVEngine3 Snapshot: 03-31-2008 05-04h Revision 18436

[MediaPortal-Bot]

[size="2"][font="Verdana"]General Infos:

Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show how to install and configure the TV-Server and TV-Client.

MediaPortal TVEngine3 Capabilities:

- seperate front/backend
- supports multiple frontends
- supports multiple backends (master/slave servers)
- analog/atsc/dvb-c/dvb-s/dvb-t support
- recording to mpeg-2 program stream (.mpg)
- mpeg-2 transport stream timeshifting
- multi tuner support of course
- epg / mhw grabbing right from the DVB stream
- network streaming via rtsp
- teletext grabbing

- ci / cam support for firedtv, twinhan and technotrend
- placeshifting
- TV Movie Clickfinder EPG import


MediaPortal TVEngine3 Requirements

[MediaPortal-Bot]

Changes since last snapshot:

------------------------------------------------------------------------
r18396 | dman_LFC | 2008-03-30 12:48:31 +0200 (So, 30 Mrz 2008) | 3 lines

removed Technotrend loop which was causing slow channel changes
added call to check if a CAM is inserted
also ensure decryption is done when the ci slot state is in CI_SLOT_CA_OK but not CI_SLOT_DBG_MSG
------------------------------------------------------------------------
r18397 | dman_LFC | 2008-03-30 12:57:34 +0200 (So, 30 Mrz 2008) | 1 line

Technotrend class now checks if CI slot has CAM inserted.
------------------------------------------------------------------------
r18399 | chef_koch | 2008-03-30 14:17:43 +0200 (So, 30 Mrz 2008) | 1 line

updated HelpReferences.xml
------------------------------------------------------------------------
r18401 | abavarian | 2008-03-30 14:41:28 +0200 (So, 30 Mrz 2008) | 1 line

removing "Keep Conflict" from TVConflict-Dialog
------------------------------------------------------------------------
r18404 | tourettes_ | 2008-03-30 16:45:45 +0200 (So, 30 Mrz 2008) | 1 line

Added DVB-C tuning parameters for Oulu, Finland
------------------------------------------------------------------------
r18406 | abavarian | 2008-03-30 17:47:51 +0200 (So, 30 Mrz 2008) | 1 line

adding missing function " IsCamPresent" to interface
------------------------------------------------------------------------
r18407 | abavarian | 2008-03-30 17:54:55 +0200 (So, 30 Mrz 2008) | 1 line

fixing mantis bug 1144
------------------------------------------------------------------------
r18409 | misterd_sf | 2008-03-30 18:54:43 +0200 (So, 30 Mrz 2008) | 1 line

Fixed link in plugin setup
------------------------------------------------------------------------
r18411 | chef_koch | 2008-03-30 19:19:58 +0200 (So, 30 Mrz 2008) | 2 lines

killing setuptv.exe and tvservice.exe on tvserver (un)installation
killing mediaportal.exe and configuration.exe on tvclient (un)installation
------------------------------------------------------------------------
r18412 | chef_koch | 2008-03-30 19:47:55 +0200 (So, 30 Mrz 2008) | 1 line

removed the setup projects itself
------------------------------------------------------------------------
r18413 | diehard2 | 2008-03-30 21:08:18 +0200 (So, 30 Mrz 2008) | 1 line

Fix for nforce2 failure in filters
------------------------------------------------------------------------
r18414 | diehard2 | 2008-03-30 21:08:36 +0200 (So, 30 Mrz 2008) | 1 line

Fix for nforce2 failures in filters
------------------------------------------------------------------------
r18415 | dman_LFC | 2008-03-30 21:18:34 +0200 (So, 30 Mrz 2008) | 1 line

adds extra logging for KNC CI issues
------------------------------------------------------------------------
r18419 | chef_koch | 2008-03-30 22:03:43 +0200 (So, 30 Mrz 2008) | 2 lines

put section in seperate node "sections"
removed some logging
------------------------------------------------------------------------
r18436 | chef_koch | 2008-03-31 04:43:05 +0200 (Mo, 31 Mrz 2008) | 1 line

cleanup, moved dialog out of sections and comboboxex to setupcontrols
------------------------------------------------------------------------

dev note

TVE3 30/03/2008 [16:47:41] tourette added: Added DVB-C tuning parameters for Oulu, Finland
TVE2 30/03/2008 [16:49:18] tourette added: Added DVB-C tuning parameters for Oulu, Finland
TVPlugIn 30/03/2008 [19:42:03] Bavarian added: fixing mantis bug 1144: Conflicts warning window: One conflicting schedule for a new series schedule: No entry to db.
MyPrograms 30/03/2008 [19:56:33] chefkoch added: is removed from official package, it is available as a standalone plugin now
Configuration: 30/03/2008 [22:11:16] chefkoch added: added help system to get easier access to our wiki

===> DOWNLOAD <===

This thread is open to everyone to provide feedback for this particular snapshot.
If you found or confirm a bug please still open a single thread with full details in the Bugsection

[and-81]

Well gentlemen, the last SVN that worked for me was 17991.

But this SVN is brilliant!!!

It works perfectly (so far) and is HEAPS faster on channel scan and channel change!

Bravo!

[mcraenz]

Yeah there's just a few of us nforce2 users Looking forward to moving off 17991 tonight :-) Thanks Diehard

[tzi]

Hi!

Channel scanning, TV watching and recording works now! Doing some stress testing now .. :-)

Thanks!

[tzi]

Hi!

Found a new issue with the current SVN. I let TV run for a while. After a certain time, it hangs. The log says at this point of time:

31-03-2008 11:26:54.859 File : E:\Divx\TOBURN\Capture\card2\live2-0.ts.tsbuffer1.ts locked.
31-03-2008 11:26:54.859 MultiFileWriter: failed to create file
31-03-2008 11:26:54.859 Failed to reopen old file. It's currently in use. Dropping data!
31-03-2008 11:26:55.640 File : E:\Divx\TOBURN\Capture\card2\live2-0.ts.tsbuffer1.ts locked.
31-03-2008 11:26:55.640 MultiFileWriter: failed to create file
31-03-2008 11:26:55.640 Failed to reopen old file. It's currently in use. Dropping data!
31-03-2008 11:26:56.421 File : E:\Divx\TOBURN\Capture\card2\live2-0.ts.tsbuffer1.ts locked.
31-03-2008 11:26:56.421 MultiFileWriter: failed to create file
31-03-2008 11:26:56.421 Failed to reopen old file. It's currently in use. Dropping data!
31-03-2008 11:26:57.218 File : E:\Divx\TOBURN\Capture\card2\live2-0.ts.tsbuffer1.ts locked.
31-03-2008 11:26:57.218 MultiFileWriter: failed to create file
....

For more information, please see the attached log files.

TIA!

[revs]

Sounds like I may be able to update my TV3 Server at last! Here's hoping to a more stable and working TV3Server!

[brletheking]

I cannot listen webstreams anymore with this SVN... I can see them in TV Server confuguration but they are not shown in MediaPortal anymore.

[tzi]

Hi!

Since today's SVN I see a lot of errors in error.log:

2008-03-31 16:02:59.234375 [10]: Exception ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPr esent(Boolean& no)
at TvLibrary.Implementations.DVB.TechnoTrend.IsCamPre sent()
at TvLibrary.Implementations.DVB.ConditionalAccess.Is CamReady()
2008-03-31 16:02:59.234375 [10]: Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
2008-03-31 16:02:59.234375 [10]: site :Int32 IsCamPresent(Boolean ByRef)
2008-03-31 16:02:59.234375 [10]: source :TVLibrary
2008-03-31 16:02:59.234375 [10]: stacktrace: at TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPr esent(Boolean& no)
at TvLibrary.Implementations.DVB.TechnoTrend.IsCamPre sent()
at TvLibrary.Implementations.DVB.ConditionalAccess.Is CamReady()
2008-03-31 16:03:02.328125 [5]: Exception ystem.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
at TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPr esent(Boolean& no)
at TvLibrary.Implementations.DVB.TechnoTrend.IsCamPre sent()
at TvLibrary.Implementations.DVB.ConditionalAccess.Is CamReady()
2008-03-31 16:03:02.328125 [5]: Exception :Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
2008-03-31 16:03:02.328125 [5]: site :Int32 IsCamPresent(Boolean ByRef)
2008-03-31 16:03:02.328125 [5]: source :TVLibrary
2008-03-31 16:03:02.328125 [5]: stacktrace: at TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPr esent(Boolean& no)
at TvLibrary.Implementations.DVB.TechnoTrend.IsCamPre sent()
...

Any ideas? TIA, Thomas

[cfforce]

100% CPU usage with my TVserver setu[

2008-03-31 16:55:00.890625 [1]: Exception   :De externe host heeft een verbinding verbroken
2008-03-31 16:55:00.890625 [1]:   site      :Void HandleReturnMessage(System.Runtime.Remoting.Messaging.IMessage, System.Runtime.Remoting.Messaging.IMessage)
2008-03-31 16:55:00.890625 [1]:   source    :mscorlib
2008-03-31 16:55:00.890625 [1]:   stacktrace:
Server stack trace: 
   bij System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
   bij System.Runtime.Remoting.Channels.SocketStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   bij System.Runtime.Remoting.Channels.SocketHandler.ReadFromSocket(Byte[] buffer, Int32 offset, Int32 count)
   bij System.Runtime.Remoting.Channels.SocketHandler.BufferMoreData()
   bij System.Runtime.Remoting.Channels.SocketHandler.Read(Byte[] buffer, Int32 offset, Int32 count)
   bij System.Runtime.Remoting.Channels.SocketHandler.ReadAndMatchFourBytes(Byte[] buffer)
   bij System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadVersionAndOperation(UInt16& operation)
   bij System.Runtime.Remoting.Channels.Tcp.TcpClientSocketHandler.ReadHeaders()
   bij System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   bij System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)

Exception rethrown at [0]: 
   bij System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   bij System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   bij TvControl.IController.CardPresent(Int32 cardId)
   bij SetupTv.SetupTvSettingsForm..ctor()

EDIT: Fixed, seemed that one of my FireDTV S2 had crashed... So after a full power off and power on; it worked again