TVEngine3 Snapshot: 04-03-2008 05-07h Revision 18530 - Page 3

lar1r · 2008-04-04, 01:56

On NA sats, the channel names dont get read in.
Even if you increase the PMT and SDT (which was the way to get it to work in the older SVNs)

cbadk · 2008-04-04, 02:25

When MP starts and the tv plugin is loaded, why not check the version of server
and then report to client that the plugin needs to be updated?

Snoopy08 · 2008-04-04, 03:29

HI There

I have just tried recordings and have a issue that they get removed when then next start..

I tagged 5 to record all different times and the only one there is the last one recorded..

Also there dont appear to be a directory for the episode like it use to.

Am i missing something or is this a current issue.

EMKO · 2008-04-04, 04:23

Quote:

Originally Posted by lar1r

On NA sats, the channel names dont get read in.
Even if you increase the PMT and SDT (which was the way to get it to work in the older SVNs)

I believe the scan settings are not working currently. Scanning will always scan at the same time even if you put any numbers in the scan settings.

limpwhizkid · 2008-04-04, 09:19

Quote:

Originally Posted by nschoot

Quote:

Originally Posted by rtv

Quote:

Originally Posted by nschoot

Also: The setup STILL does not detect MediaPortal and won't update the Client Plugin... Anyone else has that problem?

Still same answer: a proper MP 0.2.3.0 installation has been required once for SVN. Actually we shouldn't even pay attention if you report bugs with an installation like this - sorry...

What do you mean wtih "an installation like this" ?

I have been running MP 0.2.3.0 (w/o TV Server) since it was released... I just updated to the SVN's since last week (both MP and TVServer) and I had to install 18215 in order for the setup to detect MediaPortal. Newer setups never found MediaPortal.

he is telling you that you are running mediaportal RC (release candidate).. and NOT the final release..
so go install the final release and your minor problem will vanish..

nschoot · 2008-04-04, 09:48

Quote:

Originally Posted by limpwhizkid

Quote:

Originally Posted by nschoot

What do you mean wtih "an installation like this" ?

I have been running MP 0.2.3.0 (w/o TV Server) since it was released... I just updated to the SVN's since last week (both MP and TVServer) and I had to install 18215 in order for the setup to detect MediaPortal. Newer setups never found MediaPortal.

he is telling you that you are running mediaportal RC (release candidate).. and NOT the final release..
so go install the final release and your minor problem will vanish..

Why? Why does he think that? I'm not!

What log or file should I post here to show evidence about what version I'm running?

grubi · 2008-04-04, 11:04

Quote:

Originally Posted by nschoot

Quote:

Originally Posted by limpwhizkid

Quote:

Originally Posted by nschoot

What do you mean wtih "an installation like this" ?

I have been running MP 0.2.3.0 (w/o TV Server) since it was released... I just updated to the SVN's since last week (both MP and TVServer) and I had to install 18215 in order for the setup to detect MediaPortal. Newer setups never found MediaPortal.

he is telling you that you are running mediaportal RC (release candidate).. and NOT the final release..
so go install the final release and your minor problem will vanish..

Why? Why does he think that? I'm not!

What log or file should I post here to show evidence about what version I'm running?

If you read carefully you shoul have noticed that I posted the same problem in the same thread you posted the problem for the first time. The reason for me was that the Windows uninstall infromation still showed RC although I had installed the Final. So please check Control Panel -> Software which release of MP is shown there, as this is the information the installer relies on.

HTH
grubi.

nschoot · 2008-04-04, 11:49

Quote:

Originally Posted by grubi

Quote:

Originally Posted by nschoot

Why? Why does he think that? I'm not!

What log or file should I post here to show evidence about what version I'm running?

If you read carefully you shoul have noticed that I posted the same problem in the same thread you posted the problem for the first time. The reason for me was that the Windows uninstall infromation still showed RC although I had installed the Final. So please check Control Panel -> Software which release of MP is shown there, as this is the information the installer relies on.

I never reported this problem before... I reviewed all the posts you made and I think you're referring to http://forum.team-mediaportal.com/un...18395-a-37361/ ? I'll check my unintall information in the Control Panel. I did use an RC before, but I'm absolutely positive I installed the 0.2.3 final at some point (some days after it was released).

Btw: What would be the correct thread/forum to discuss the standby functionality?

grubi · 2008-04-04, 14:42

Quote:

Originally Posted by nschoot

I never reported this problem before...

Sorry - maybe I confused your message with a different post.

Quote:

Originally Posted by nschoot

I'll check my unintall information in the Control Panel. I did use an RC before, but I'm absolutely positive I installed the 0.2.3 final at some point (some days after it was released).

As I wrote this was the same for me. I installed the Final but is was not reflected by the cotnrol panel.

morpheus_xx · 2008-04-04, 18:26

Quote:

Originally Posted by dman_lfc

Quote:

Originally Posted by cybernn

Since version TVE3 18513 in error.log the following:

Code:

2008-04-03 19:03:09.515625 [12]: Exception   :System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt
   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:09.515625 [12]: Exception   :Attempted to read or write protected memory. This is often an indication that other memory is corrupt
2008-04-03 19:03:09.515625 [12]:   site      :Int32 IsCamPresent(Boolean ByRef)
2008-04-03 19:03:09.515625 [12]:   source    :TVLibrary
2008-04-03 19:03:09.515625 [12]:   stacktrace:   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:12.671875 [11]: Exception   :System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt
   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()
2008-04-03 19:03:12.671875 [11]: Exception   :Attempted to read or write protected memory. This is often an indication that other memory is corrupt
2008-04-03 19:03:12.671875 [11]:   site      :Int32 IsCamPresent(Boolean ByRef)
2008-04-03 19:03:12.671875 [11]:   source    :TVLibrary
2008-04-03 19:03:12.671875 [11]:   stacktrace:   в TvLibrary.Interfaces.Analyzer.ITechnoTrend.IsCamPresent(Boolean& no)
   в TvLibrary.Implementations.DVB.TechnoTrend.IsCamPresent()
   в TvLibrary.Implementations.DVB.ConditionalAccess.IsCamReady()

Interesting..., any bad effects?
morpeus_xx is going to update some of this Technotrend handling since he has a card/CI & CAM to test against.

DMAN

I think I fixed this. Most probably it was caused by the interface definition. Sent the patch to dman.

Please test this and report if it's working.

2008-04-04, 02:25	#22 (permalink)
cbadk Portal Member Join Date: Nov 2007 Location: Denmark Age: 25 Posts: 43 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	Check for client version? When MP starts and the tv plugin is loaded, why not check the version of server and then report to client that the plugin needs to be updated? __________________ _____________________________ Best Regards, Claus Server: Asus P5B-VM SE Intel Pentium 4 3.0 GHz Dualcore 3 Gb DDR2 800 Mhz Ram 250 GB SATA HDD 120 GB ATA 1.5 GB RAMdisk for TV-temp

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MediaPortal SVN-Snapshot: 04-03-2008 05-05h - Revision:18530	MediaPortal-BOT	'Nightly Builds' - v0.2.3.0 - final	17	2008-04-05 13:06
TVEngine3 Snapshot: 04-01-2008 05-07h Revision 18463	MediaPortal-BOT	untested 'Nightly Builds' of TV-Server	8	2008-04-02 07:38
TVEngine3 Snapshot: 03-05-2008 05-07h Revision 17745	MediaPortal-BOT	untested 'Nightly Builds' of TV-Server	10	2008-03-06 19:48
TVEngine3 Snapshot: 03-03-2008 05-07h Revision 17711	MediaPortal-BOT	untested 'Nightly Builds' of TV-Server	21	2008-03-05 21:29

2008-04-04, 01:56	#21 (permalink)
lar1r Portal Member Join Date: Aug 2007 Posts: 36 Thanks: 1 Thanked 2 Times in 2 Posts	On NA sats, the channel names dont get read in. Even if you increase the PMT and SDT (which was the way to get it to work in the older SVNs)

2008-04-04, 03:29	#23 (permalink)
Snoopy08 Portal Member Join Date: Jan 2008 Posts: 64 Thanks: 1 Thanked 0 Times in 0 Posts Country:	HI There I have just tried recordings and have a issue that they get removed when then next start.. I tagged 5 to record all different times and the only one there is the last one recorded.. Also there dont appear to be a directory for the episode like it use to. Am i missing something or is this a current issue.