2.2 Archive (3 Viewers)

More to the point, I had triggered an import of my Movie folder this morning after putting in place the new files. It progressed to about 6% by around 0830 (a few minutes after I had started) and then there has been no progress since then. There is CPU and disk activity throughout, but no progress other than these log items above...
More to the point, I had triggered an import of my Movie folder this morning after putting in place the new files. It progressed to...
MediaPortal 2 Version: 2.2 Final Description Hi guys, So I tried MP2 again after some time and I have the issue that the MP2...
Replies
38
Views
6K
Thanks for the fast replays, All shares have the same user (Multimedia) allowed to fully access (read, write, ...). I changed the network credentials in MediaPortal to an invalid username/password combination, rebooted and I was still able to access the series and movies share but not the recordings. After that I changed the...
Thanks for the fast replays, All shares have the same user (Multimedia) allowed to fully access (read, write, ...). I changed the...
MediaPortal 2 Version: 2.2.1 Description Hello guys, what a simple thread title. But I’m not sure how to describe my issue. But I...
Replies
30
Views
6K
@tlhackque , please test the new MP 2.2.1 and report back.
@tlhackque , please test the new MP 2.2.1 and report back.
MediaPortal 2 Version: 2.2 Description Was successfully running MP2.1.1, upgraded to 2.2. Combined client/server under W10 pro...
Replies
34
Views
6K
  • Locked
Indeed. My concern was that neither 2.1.3 Pre-Release, nor 2.2 development currently result in a successful installation in this situation, and that people may preferentially view 2.1.3 as the current stable.
Indeed. My concern was that neither 2.1.3 Pre-Release, nor 2.2 development currently result in a successful installation in this...
Hello all, I would like to try MediaPortal 2, but have run into a show stopping installation bug. The installation fails with...
Replies
19
Views
5K
  • Locked
@Holzi to not hijack the other thread, could you please post your MP2-Server log? Or even better, use the Log collector. Since your doing an upgrade, it should be already present on your system.
@Holzi to not hijack the other thread, could you please post your MP2-Server log? Or even better, use the Log collector. Since...
MediaPortal 2 Version: 2.1.3 Description Just tried the MP2.2 pre release and it fails with an error saying it cannot start the...
Replies
32
Views
5K
The pull request is already there. Note - I have based all my bug fixes on master, in two separate branches, but they all merge cleanly with WIP.
The pull request is already there. Note - I have based all my bug fixes on master, in two separate branches, but they all merge...
MediaPortal 2 Version: 2.2 Description I have reproduced the problem with VS2017 compiled current master branch (SHA-1...
Replies
36
Views
5K
I believe that I had this error just once in the last couple of months, so maybe an Intel driver thing that was improved in recent versions. However, I remember having seen it in the OTE tracker, yet no idea if with less occurrences now. Should we make a general "Help us" thread and call for testers?
I believe that I had this error just once in the last couple of months, so maybe an Intel driver thing that was improved in recent...
MediaPortal 2 Version: 2.1.3 Description Started MP .. did some casual TV channel surfing. Then tried to stop timeshifting by...
Replies
21
Views
5K
#metoo
#metoo
Both of my v.2.2.1 PCs wakes up every night at 2am. The only setting I can find in settings is for share refresh, which I have set...
Replies
32
Views
4K
Found that sometime I have to close media portal on the client and open it again to get the subtitle back even I have already selected "eng".
Found that sometime I have to close media portal on the client and open it again to get the subtitle back even I have already...
MediaPortal 2 Version: 2.2.1 Description I seem to have some issues with teletext subtitles in 2.2.1. One issue is that the does...
Replies
20
Views
4K
Sure you do. "Reimport" will give you a choice of similar entries from which you can select. The better way is of course to name your file directly with the correct name and year: Conan the Barbarian (2011) - or 1982 as there are two movies with the same name. The movie that you are probably looking for is "Conan (2010)", just name...
Sure you do. "Reimport" will give you a choice of similar entries from which you can select. The better way is of course to name...
mp do not accept changes in tmm (nfo files) and does not refresh the db. Also MP 2 use growriting for every word in the movie...
Replies
33
Views
3K
Please enable debug logging and after a crash use the log collector and attach the logs here. Gesendet von meinem SM-G930F mit Tapatalk
Please enable debug logging and after a crash use the log collector and attach the logs here. Gesendet von meinem SM-G930F mit...
MediaPortal 2 Version: 2.2.1 Description I really don't know where to start with this. My upgrade to MP2.2.1 has been a total...
Replies
7
Views
3K
To correct myself: yes, but within limits. Some settings will be global, others still local.
To correct myself: yes, but within limits. Some settings will be global, others still local.
MediaPortal 2 Version: 2.2 Description Possible bugs: WMC skin customised home menu does not always load. About 1 in 5 launches...
Replies
20
Views
3K
@morpheus_xx The provided .dll has the "old" check against the ATSC subs option. I realized that the method AddEvr() (where _closedCaptionsFilterAdded was evaluated in order to increment the stream count) is executed before AddSubtitleFilter (where _closedCaptionsFilterAdded was set) from TsVideoPlayer. So, even if we could know if...
@morpheus_xx The provided .dll has the "old" check against the ATSC subs option. I realized that the method AddEvr() (where...
MediaPortal 2 Version: 2.2.1 Description I'm having trouble getting TV subtitles to work. What happens is that an ActiveMovie...
Replies
14
Views
3K
I've marked it as "Fixed" since the original crash issue is resolved. It would be intersting to know if the other behavior that you now describe is dependent on the skin. Is it behaving the same way if you use a BlueVision theme, e.g. TitanExtended? @ge2301, can you confirm the behavior? is this a skin problem or something general?
I've marked it as "Fixed" since the original crash issue is resolved. It would be intersting to know if the other behavior that...
MediaPortal 2 Version: 2.1.3 Description Not sure if this is the correct way to submit a report, but I have uncovered a bug in a...
Replies
10
Views
3K
According to the link that you provided, these files wil have the extension m2ts. Could you upload a short video file for us somewhere to take a look?
According to the link that you provided, these files wil have the extension m2ts. Could you upload a short video file for us...
MediaPortal 2 Version: 2.2 Description Cannot start MediaPortal getting report "could not find the MediaPortal common messaging...
Replies
5
Views
2K
  • Locked
I just tested this with the new 2.2pre - unfortunately no change: Watching a recording from start to end without stopping in between leaves the recording as unwatched.
I just tested this with the new 2.2pre - unfortunately no change: Watching a recording from start to end without stopping in...
using MP2.1 the player watched percentage doesn't seem to work with .ts files. I can play recordings to the end and it never shows...
Replies
6
Views
2K
Check under the Multimediaeinstellungen, that's where the Away Mode setting is. I'm having issues myself with this as of lately, it's like some windows update has forced it upon us somehow? I have my remote control's Power button to Turn Off Computer, but in way too many instances, it puts my Intel NAC into Away Mode instead (only in...
Check under the Multimediaeinstellungen, that's where the Away Mode setting is. I'm having issues myself with this as of lately...
Hello, now i try my luck in the top forum because i can´t found a solution in the german part. Here is my problem: the PC wake...
Replies
9
Views
2K
  • Locked
Just checked my examples (series recordings) and it is as you said: 2 recordings are grouped into one single item. When I playback it, the "next/previous" keys can be used to skip to the different "editions". My changes on player side are considering the multi-part scenario (like movie.DVD1.mkv / movie.DVD2.mkv), but not the...
Just checked my examples (series recordings) and it is as you said: 2 recordings are grouped into one single item. When I playback...
MediaPortal 2 Version: 2.1.3 Description So I noticed that my MP2 setup always seems to report 1 film less than everything else...
Replies
6
Views
2K
  • Locked
There is a custom action to read the custom paths from an existing installation in order to update the files in those path(s). According to the logs, this action gets called. I can't say why the installer ends with an privilege error. I found some more info about this error here. I suppose this point: can apply here. But I'm not...
There is a custom action to read the custom paths from an existing installation in order to update the files in those path(s)...
MediaPortal 2 Version: 2.1.3 Description I am upgrading from 2.1.3 to 2.2 Pre release Setup goes all the way through to Starting...
Replies
4
Views
2K
  • Locked
In a different thread a solution for sudden service stop was to assign a fixed IP to the server PC and then set it up in the MP2 server settings instead of the "auto" entry. Something that you could try if the issue reappaears. Meanwhile I'll mark this thread as solved.
In a different thread a solution for sudden service stop was to assign a fixed IP to the server PC and then set it up in the MP2...
MediaPortal 2 Version: 2.2 Description I have had this problem since I installed about 6 Months ago. I think I botched the...
Replies
5
Views
2K
Yes it is fine now. I have to removed all the resources and have to wait a bit longer to make sure database updated before I added the network folder again. Otherwise it will mix up.
Yes it is fine now. I have to removed all the resources and have to wait a bit longer to make sure database updated before I added...
MediaPortal 2 Version: 2.2.1 Description I have no problem with external SRT file or inside MKV on the server but on the client it...
Replies
18
Views
2K
Jira MP2-810 Branch now committed and merged into WIP.
Jira MP2-810 Branch now committed and merged into WIP.
MediaPortal 2 Version: 2.2.1 Description Hi. Lately I saw an issue with MP2.2.1. I've scheduled some recordings manual as there...
Replies
11
Views
2K
Bump:
Bump:
So I have a rather large collection of movies, and when I try to use "filter by actor" I get a message saying I can't do it because...
Replies
3
Views
2K
Indeed, that should not happen. According to Wikipedia there are 51 ATSC channels. #37 is reserved (and indeed skipped by MP with no signal). Scanning continues up to #50 and then crashes at #51. This last channel is also reserved. Notwithstanding, TVServer should not crash when scanning it. That said there is more than just this MP2...
Indeed, that should not happen. According to Wikipedia there are 51 ATSC channels. #37 is reserved (and indeed skipped by MP with...
MediaPortal 2 Version: 2.2 Description This is a new Win10 system (i5, 32GB memory, amples of disk space) setup as a replacement...
Replies
9
Views
2K
  • Locked
I just had the same experience where TV crashes the client app to desktop with the same crash dump as yours. I now set up the attached plugin version to collect more data if it happens again. However, I have TV now up since five hours and nothing happened. It could be useful if you also exchanged the dll and actively triggered the...
I just had the same experience where TV crashes the client app to desktop with the same crash dump as yours. I now set up the...
MediaPortal 2 Version: 2.2 Description Setup: (upstairs) MP2.2pre Server connected to WLAN and TV antenna. (downstairs) MP2.2pre...
Replies
8
Views
2K
Hi, sorry for the late reply. Yes I tried this but it didn't make any difference. I have since just left my mediaportal pc on all the time. It doesn't use much power. Thanks for your advice :)
Hi, sorry for the late reply. Yes I tried this but it didn't make any difference. I have since just left my mediaportal pc on all...
MediaPortal 2 Version: 2.2 Description Hi, Even with MP set to run at full screen and also the shortcut set to run maximised when...
Replies
7
Views
1K
Please try to install the DirectX9 package manually, then run the MP2 installer again. You can download it from here.
Please try to install the DirectX9 package manually, then run the MP2 installer again. You can download it from here.
MediaPortal 2 Version: 2.2 Description Hello, Im a partly happy WMC user for years - now ready to try out MP2. However the...
Replies
1
Views
1K
Absolutely, thanks for the quick fix @Nikki Locke
Absolutely, thanks for the quick fix @Nikki Locke
MediaPortal 2 Version: 2.2.1 Description It seems that the Party Music Player might have the same issue that was present in in a...
Replies
7
Views
1K
Hello, I've never seen anything like this before nor am I aware of such issues for MP1/MP2. Very strange. Looks more like a graphics driver problem. Please post your logs as explained in the WIki under Bug Reports and Log Files. Hhm, such a number is unusually high. I guess you are using the auto-group function. Consider not...
Hello, I've never seen anything like this before nor am I aware of such issues for MP1/MP2. Very strange. Looks more like a...
MediaPortal 2 Version: 2.2 Description I am new to MP, maybe 4 hours, so I apologize upfront for this report. I use a DVBSKY s950...
Replies
1
Views
1K
Have made the change in a branch, tested it, pushed it and merged it with WIP.
Have made the change in a branch, tested it, pushed it and merged it with WIP.
MediaPortal 2 Version: 2.2 Description I’ve recently moved from MP1 to MP2 2.2pre and find that series recordings that have been...
Replies
7
Views
1K
Top Bottom