Sadly "ARD alpha HD" is not added to the channel-list.
I followed the idea of Mrbonsen to manually change the settings of an unused exisiting channel to the expected values for "ARD alpha HD".
This works fine.
I noticed that the settings of another channel is very similar, so maybe Mediaportal can not divide between these channels:
Sadly "ARD alpha HD" is not added to the channel-list.
I followed the idea of Mrbonsen to manually change the settings of an unused...
As the german channel "ARD Alpha" is now only available in HD i tried to switch to the HD-channel.
but after a channel-scan there...
Thanks for all the assistance; it is greatly appreciated. Rather than going the suggested route: I decided to do was I had stated earlier.
I deleted all partitions (after taking the respective images, of course), then used Partition Master to do a surface scan, on the raw drive. As it came back with zero bad clusters, I thought it...
Thanks for all the assistance; it is greatly appreciated. Rather than going the suggested route: I decided to do was I had stated...
This is a continuation of this thread. As I have discovered the actual (most likely) cause, I have posted to the relevant forum...
duplicate post see below for for solution
https://forum.team-mediaportal.com/threads/mp-suddenly-crashes-when-starting-live-tv-on-most-channels-and-on-recordings-from-the-same-channels.139849/#post-1270831
duplicate post see below for for solution...
I have been using MP 1 for years with no troubles. but in the last couple of days it sudden just crashes when starting live tv...
Well, I've found out what it was :)
People's advice to run the tvservice as the normal user was correct, but it turns out that Windows won't run a service as a user with no password. It doesn't complain when you set the user in the service properties, but fails with a login error when it tries to start the service.
Adding a password...
Well, I've found out what it was :)
People's advice to run the tvservice as the normal user was correct, but it turns out that...
I've moved a load of my old recordings onto a NAS to clear space on my internal drive. I've pointed the recording directory of an...
I'm really really happy when my noob knowings help people!
I don't think deleting thread will be right since someone with similar problems could find them, look at logs and maybe find some answers. Anyway, it's up to @Moderators to decide it.
Also I think it could be a bug if All channels group is missing and you didn't delete it. I...
I'm really really happy when my noob knowings help people!
I don't think deleting thread will be right since someone with similar...
Hi All
I am using MediaPortal v1.19.0 for AVerTV Hybrid Volar HD H830 in MP1.
Although TV-Server Configuration found 141...
@Owlsroost @mm1352000
Just wanted to clear this up finally. The Nvidia GTX 1050Ti is now installed in my Desktop PC, and if I play the problem recording there I still get a green screen etc. with the Hardware Decoder set to DXAV2 Copy-Back and Native, however with Lav 0.70.0 the Nvidia Cluvid decoder now supports HEVC and when I use...
@Owlsroost @mm1352000
Just wanted to clear this up finally. The Nvidia GTX 1050Ti is now installed in my Desktop PC, and if I play...
I have recently begun to experience green screens very intermittently when watching live DVBT2 HD (HEVC) TV and yesterday evening I...
It was a bug in a recent Avast update.
I forced Avast to update it's program (it downloaded quite a bit) and all is ok again.
Many thanks for your assistance, i would never have solved the problem my self. Made a small donation for your effort :)
It was a bug in a recent Avast update.
I forced Avast to update it's program (it downloaded quite a bit) and all is ok again.
Many...
hi, ive been using mediaportal for years now and have had my share of issues, this one has me stumped.
out of nowhere, i could...
I found the reason for my problem. The R:\ drive is a network drive and so the tvservice (system account) had not the permission to write on it.
I changed the drive adress to the UNC adress: \\mediaserver\recordings. Now it's working .
Thank you for your support. (y)
I found the reason for my problem. The R:\ drive is a network drive and so the tvservice (system account) had not the permission to...
Hello
HTPC with Win7 Pro 64Bit
I changed the mainboard slot of my tv card (digital devices cine 6) and installed the MP 1.16 pre...
Hi mm,
just a heads up: I faced the same problem again after updating HTPC 2 to MP 1.16 Pre. I had done an 'Update satellite list' and had then made a new channel scan. Suddenly the problem with the channel on position '8' - RTL 2 - was there again. Live TV would freeze after I wanted to change to RTL 2 directly by pressing '8' on my...
Hi mm,
just a heads up: I faced the same problem again after updating HTPC 2 to MP 1.16 Pre. I had done an 'Update satellite list'...
Hi,
I have set up a new HTPC with Windows 10 and MP 1.13. See HTPC 2 in my system specs. When changing during live TV to the...
'Area51' is the place for test builds with new/updated features (which is where I posted git-1.15.0.746). It concentrates the testing and feedback for individual updates each in a single thread, which is much better for development purposes.
Years ago we used to have weekly builds, but it made user support difficult with lots of...
'Area51' is the place for test builds with new/updated features (which is where I posted git-1.15.0.746). It concentrates the...
Edited by Owlsroost - For a version of MP1 that works with the DVB-T2 HD transmissions in Germany, see this post -...
Hi all.
I wanted to post my recent experience with my TV Server/NAS setup which caused me huge problems last week. Hopefully, by posting this, I will help someone else in the future having similar problems.
I have my system setup with the TV Server configured to record everything to one of the volumes on my NAS (D-Link Share Centre...
Hi all.
I wanted to post my recent experience with my TV Server/NAS setup which caused me huge problems last week. Hopefully, by...
Hi all.
I wanted to post my recent experience with my TV Server/NAS setup which caused me huge problems last week. Hopefully, by...
No. If it is just a tuning detail update, please post the update here:
https://forum.team-mediaportal.com/forums/submit-epg-grabbers-and-tuningdetails.296/
...or we could move this thread there.
No. If it is just a tuning detail update, please post the update here...
Hi,
after some frequency changes unitymedia made last days (113 MHz -> 114 MHz, 121 MHz -> 122 MHz, 129 MHz -> 130 MHz) a new...
After trying many different things, I got the best result by setting LAV filters to DXVA Native from Intel QuickSync and disabling Refresh Rate Changer. There was still stuttering though, so it wasn't solved. The latest things I've done is update LAV filters and the Intel Graphics drivers, and now the stuttering seems to be gone. I...
After trying many different things, I got the best result by setting LAV filters to DXVA Native from Intel QuickSync and disabling...
Hi
I just upgraded my Win 7 32-bit HTPC to Win 7 64-bit, so I could use more than 4GB of RAM.
Hardware:
* Digital Devices Octopus...
Thanks! Good tip, will try that as well. For now it works OK again... That SSD is quite buggy, it caused an unrecoverable BSOD in windows 8.1, forcing me to do a complete reinstall of w8.1 last week. Signal strength is excellent, 100% all the time, so I am pretty sure the SSD is the culprit. I will have it replaced this week, by a...
Thanks! Good tip, will try that as well. For now it works OK again... That SSD is quite buggy, it caused an unrecoverable BSOD in...
Hi,
Today I did a clean install of Mediaportal 1.10.0 final that was realeased today.. but when watching live HD TV, I experience...
Yes - it was almost midnight when I posted.:sleep:
I've been using DVB Viewer for a very long time. It was actually my brother's idea that I should install TV Server so he could stream some TV from me when he needed to watch some sports or other channels he doesn't have himself. So it's actually a service I provide for my brother...
Yes - it was almost midnight when I posted.:sleep:
I've been using DVB Viewer for a very long time. It was actually my brother's...
I have a Cinergy C PCI TV Card and a Terratec H5 USB TV Card. The latter is configured to work in TVServer - and does so fine. The...