Big thanx for that!
Clue:
With Buffer 0,19 I've a few moments of whitenoise at the beginning of all my DTS-Wavs (5.1).
0,40 works much better for me.
Perhaps: Averyone has to find his own best.
Big thanx for that!
Clue:
With Buffer 0,19 I've a few moments of whitenoise at the beginning of all my DTS-Wavs (5.1).
0,40 works...
MP 1.10.0
@hwahrmann
Hi!
With MP 1.10.0 i've noticed some playback issues. Steps to reproduce ->
1. Configure MP for music...
I was experimenting with some remote controls yesterday, during which I noticed that the problems addressed by this thread are somewhat more complex than described earlier. :(
I had thought that this was the case, but I now realise that it depends on where the radio recording is stored:
(1) If the radio recording is stored in the...
I was experimenting with some remote controls yesterday, during which I noticed that the problems addressed by this thread are...
MediaPortal Version: 1.10.0
Description
Hi all,
Preface: This not necessarily a 'bug', but a follow-up and summary of a...
It happened again today.
I was actually doing something else ( streaming a video from LightBox -, which was working fine, and I have done an number of times before successfully) then suddenly my PC froze, and for about 2 mins I couldn't do anything. The mouse cursor worked (and had the revolving circle indicating it was busy) , but...
It happened again today.
I was actually doing something else ( streaming a video from LightBox -, which was working fine, and I...
MediaPortal Version: 1.10.0
Description
After upgrading from 1.9.0 to 1.10.0 TV server stops randomly or the connection to it is...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think.
I did try to record without avtive front-end and without power-saving options active: same result as before. But since it is only to change the senning to never stop the frontend, I can lile with it. Could be...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think.
I did...
MediaPortal Version: 1.10.0
Description
After some testing I realized that the recordings became useless whenever the frontend...
Trying to program several events of a TV-Show (e.g. Series Eps) via "Upcoming Episodes" does not take individual Pre- & Post-Record settings into account.
Changes to the Pre- & Post-Record settings are only affecting the Show entry point where from EPG-Menu one is switching to "Upcoming Episodes" Menu.
Steps to reproduce:
Step 1
Go...
Trying to program several events of a TV-Show (e.g. Series Eps) via "Upcoming Episodes" does not take individual Pre- & Post-Record...
Trying to program several events of a TV-Show (e.g. Series Eps) via "Upcoming Episodes" does not take individual Pre- & Post-Record...
Hi,
i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no informations on the last channel, i do the live-tv-modul on and off, after this i can programm in the epg. Til today there is no solution. Go on my other 2 threads of this problem...
Hi,
i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no...
Hello Com,
i have noticed an issue. I was aware of was in MP 1.9 but now are not resolved. I have wrote it down here.
Melmak have...
Hi,
There is problem using PCTV tuners with TVE. Probably some bug on drivers. DVB-T side of this triple stick is using normal tuning parameters, but DVB-C side must have symbol rate in x 1000 format. In multi tuner system SR x 1 and SR x 1000 cannot be used on the same channel (if they are on the same provider) since TVE will combile...
Hi,
There is problem using PCTV tuners with TVE. Probably some bug on drivers. DVB-T side of this triple stick is using normal...
Hi,
There is problem using PCTV tuners with TVE. Probably some bug on drivers. DVB-T side of this triple stick is using normal...
Ahhh, I have a WinTV CI myself and I recall that happening to me too. I thought I had just done something wrong, but now I guess the CI driver installer is a bit weird/buggy.
Yeah, thanks for reporting your solution. Very happy to hear that the problem is resolved. :)
Ahhh, I have a WinTV CI myself and I recall that happening to me too. I thought I had just done something wrong, but now I guess...
Hi,
I made a fresh install of win7 and MP 1.10.0 and everything works fine except that the WinTV-CI tab dissappeard and...
Hi,
We're going to remove the entire visualisation from MediaPortal 1, so don't expect a fix for this.
I've updated the thread status and more info about this can be found here:
https://forum.team-mediaportal.com/threads/dropping-music-visualisation-for-mediaportal-1-11.129162/
Hi,
We're going to remove the entire visualisation from MediaPortal 1, so don't expect a fix for this.
I've updated the thread...
https://forum.team-mediaportal.com/threads/mediaportal-configuration-crash-when-closing-stays-running.127862/
had same issue in...
Thanks for reporting back. I'm always happy to hear positive results. :)
I don't know, but quite possibly. In theory trying to tune to the same channel over and over (or even tuning to different channels lots of times) as the EPG grabber was doing shouldn't cause a BSOD with a good driver. I think of the EPG grabber as...
Thanks for reporting back. I'm always happy to hear positive results. :)
I don't know, but quite possibly. In theory trying to...
Hi,
I have been using MediaPortal since at least December 2012 and am full of admiration for it and the developers and supporters...
In the mediaportal configuration there is a button list in DVD Discs/Images -> DVD Discs/Images Player -> External player -> Parameters. To use Total media theatre to play bluray etc, %root% should be used as parameter but this parameter is missing from the list which is shown when you click the "List" button. I think this should be...
In the mediaportal configuration there is a button list in DVD Discs/Images -> DVD Discs/Images Player -> External player ->...
In the mediaportal configuration there is a button list in DVD Discs/Images -> DVD Discs/Images Player -> External player ->...