I further add that access to particular parts of the CAM menu (eg. entitlements, supported CA system IDs) may be affected by the CAM usage at the time. In other words, if the CAM is busy decrypting channels, it may not be possible to access certain details. That would be a limitation imposed by the CAM and/or DD driver MTD design. As...
I further add that access to particular parts of the CAM menu (eg. entitlements, supported CA system IDs) may be affected by the...
MediaPortal Version: 1.16.0 pre-release
Description
When I open the CI entitlement menu I get nothing, I can only see the full...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think.
I did try to record without avtive front-end and without power-saving options active: same result as before. But since it is only to change the senning to never stop the frontend, I can lile with it. Could be...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think.
I did...
MediaPortal Version: 1.10.0
Description
After some testing I realized that the recordings became useless whenever the frontend...
Hi,
i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no informations on the last channel, i do the live-tv-modul on and off, after this i can programm in the epg. Til today there is no solution. Go on my other 2 threads of this problem...
Hi,
i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no...
Hello Com,
i have noticed an issue. I was aware of was in MP 1.9 but now are not resolved. I have wrote it down here.
Melmak have...
They're caused by the CPU running at frequencies which are too low for MediaPortal and/or TV Server's needs. Power saving is great and to be encouraged... but when dealing with real-time media streaming, a guaranteed minimum level of performance is needed. If the power saving settings allow performance to drop below the required...
They're caused by the CPU running at frequencies which are too low for MediaPortal and/or TV Server's needs. Power saving is great...
MediaPortal Version: 1.15.0
Description
Media Portal TV server runs as Windows service under System account.
The ts files for...
Hi @mm1352000 I have new questions about raw TS recording: I've now bought TS Doctor v2.0 and I thought I'd do a check again to see if it finds anything different than v1.0 and I also did a check on the full transponder recording that I provided to you (which I hadn't thought of doing at the time), and I found this which I find weird...
Hi @mm1352000 I have new questions about raw TS recording: I've now bought TS Doctor v2.0 and I thought I'd do a check again to see...
MediaPortal Version: 1.16.0
Description
Hello everyone.
When trying to record a movie this weekend I noticed an issue on a TV...
This is what I was thinking of. If you're confident that's not happening, rule it out.
I'd say that's impossible unless there was a serious Windows or hardware bug. MP and S@H are 100% independent.
Hmmmm nice to take the optimistic view. :)
Honestly, if it were me in your position, I'd still try testing your system's CPU and memory...
This is what I was thinking of. If you're confident that's not happening, rule it out.
I'd say that's impossible unless there was...
MediaPortal Version: 1.14.0
Description
In MP 1.15.0, which is not in the drop down list... I have tried removing unwanted...
Ahhh, I have a WinTV CI myself and I recall that happening to me too. I thought I had just done something wrong, but now I guess the CI driver installer is a bit weird/buggy.
Yeah, thanks for reporting your solution. Very happy to hear that the problem is resolved. :)
Ahhh, I have a WinTV CI myself and I recall that happening to me too. I thought I had just done something wrong, but now I guess...
Hi,
I made a fresh install of win7 and MP 1.10.0 and everything works fine except that the WinTV-CI tab dissappeard and...
Big thanx for that!
Clue:
With Buffer 0,19 I've a few moments of whitenoise at the beginning of all my DTS-Wavs (5.1).
0,40 works much better for me.
Perhaps: Averyone has to find his own best.
Big thanx for that!
Clue:
With Buffer 0,19 I've a few moments of whitenoise at the beginning of all my DTS-Wavs (5.1).
0,40 works...
MP 1.10.0
@hwahrmann
Hi!
With MP 1.10.0 i've noticed some playback issues. Steps to reproduce ->
1. Configure MP for music...
Just to close off this thread...
Solution for no EPG data described here:
Norwegain (Canal Digital) DVB-S EPG stopped working
Language code "NOR" being unavailable for selection in MP and/or TV Server Configuration is system-specific. The list of language codes comes from Windows/.NET cultures. With a little code, it's possible to...
Just to close off this thread...
Solution for no EPG data described here:
Norwegain (Canal Digital) DVB-S EPG stopped working...
now and then , I need the edit the mediaportal.xml to make Norwegian audio default for DVB-S - because the GUI does not allow me to...
interesting in my HTPC it was only working the first time and then i had the same issue.
Must be something with Remote handling.
It is definitely not related to BASS player, since it even get invoked from the central g_player instance.
Need to check, what type of action code, i would get from a remote
interesting in my HTPC it was only working the first time and then i had the same issue.
Must be something with Remote handling...
MP 1.16.0
Steps to reproduce:
1. Setup My Music for skip steps
2. Start MP
3. Start playback of a music file
4. Try to skip ->...
I found a thread that talks about a similar issue with similar hardware where somebody cut himself out by disabling the USB controller. The only solution was to send the unit back to the manufacturer to get the BIOS reflashed.
It's a pity, but fortunately at a price of 90 GBP not a financial disaster. Yet I do not particularly like...
I found a thread that talks about a similar issue with similar hardware where somebody cut himself out by disabling the USB...
Guys,
I discovered a PowerScheduler problem this morning on a Win 10 Home x86 client:
Under Windows the client is entering...
Regeszter: My server has no client running on it (i.e. dedicated and 'headless'), thus the problem with having _lastUserTime updated to prevent entering standby prematurely.
Dev Group: Please consider the following patch for TvEngine3\TVLibrary\Plugins\PowerScheduler\PowerScheduler.cs in Mediaportal 1 Main branch.
NOTES:
1) I didn't...
Regeszter: My server has no client running on it (i.e. dedicated and 'headless'), thus the problem with having _lastUserTime...
MediaPortal Version: 1.14.0
Description
Dear Dev,
I have a machine with TVServer installed and use the PowerScheduler to shutdown...
Ok, Seems 'solved' then.
I tagged the thread as [no bug].
If the results after remuxing are still faulty, please continue here. I (or anyone else) will change the prefix accordingly.
greets
Ok, Seems 'solved' then.
I tagged the thread as [no bug].
If the results after remuxing are still faulty, please continue here. I...
MediaPortal Version: 1.12.0
Description
Hi all,
since Version 1.12 the dynamic refresh rate changer is simple not working any...
Thanks for reporting back. I'm always happy to hear positive results. :)
I don't know, but quite possibly. In theory trying to tune to the same channel over and over (or even tuning to different channels lots of times) as the EPG grabber was doing shouldn't cause a BSOD with a good driver. I think of the EPG grabber as...
Thanks for reporting back. I'm always happy to hear positive results. :)
I don't know, but quite possibly. In theory trying to...
Hi,
I have been using MediaPortal since at least December 2012 and am full of admiration for it and the developers and supporters...