Archive (13 Viewers)

This forum contains archived bugreports of earlier MediaPortal versions.
They're caused by the CPU running at frequencies which are too low for MediaPortal and/or TV Server's needs. Power saving is great and to be encouraged... but when dealing with real-time media streaming, a guaranteed minimum level of performance is needed. If the power saving settings allow performance to drop below the required...
They're caused by the CPU running at frequencies which are too low for MediaPortal and/or TV Server's needs. Power saving is great...
MediaPortal Version: 1.15.0 Description Media Portal TV server runs as Windows service under System account. The ts files for...
Replies
10
Views
3K
Hi This is what i have done since your last message. installed win 7 64bit on a new 120GB SSD with all hardware and software updates, bios latest version. installed MP v1.17, after a successful install, i close the installer and go 1st thing to tv server configuration and check if tv channels has and all channels group, and...
Hi This is what i have done since your last message. installed win 7 64bit on a new 120GB SSD with all hardware and software...
MediaPortal Version: 1.17.0 Description Hi, thank you for MediaPortal great product. Here is the problem, my hauppauge HVR-2250...
Replies
5
Views
3K
Ok In the network adapter properties I have IPv4 Checksum Offload - Current setting - RX & Tx Enabled Large send Offload v2 (IPv4) - Enabled Large send Offload v2 (IPv6) - Enabled TCP Checksum Offload (IPv4) - Rx & Tx Enabled TCP Checksum Offload (IPv6) - Disabled UDP Checksum Offload (IPv4) - Rx & Tx Enabled UDP Checksum Offload...
Ok In the network adapter properties I have IPv4 Checksum Offload - Current setting - RX & Tx Enabled Large send Offload v2 (IPv4)...
MediaPortal Version: 1.15.0 Description Folks, I was running 12 until an error appeared in the Music Sync area. Please remember...
Replies
16
Views
3K
Ok, indeed on 1.18 the dialog menu is displayed almost fine on minidisplay. But I have some remarks... First line is always empty as before on Titan skin (it could be a skin problem, because I've checked it also on DefaultWideHD skin and there is ok). Next thing is that, when you open dialog menu both lines are empty. You have to go...
Ok, indeed on 1.18 the dialog menu is displayed almost fine on minidisplay. But I have some remarks... First line is always empty...
MediaPortal Version: 1.17.0 Description I have noticed that my external display doesn't display any info when I navigate any...
Replies
4
Views
3K
BINGO!!! it fix the problema instaling the win 8.1 drivers THANK YOU
BINGO!!! it fix the problema instaling the win 8.1 drivers THANK YOU
HI I have just update my Windows 10 X64 build 14393.693 to march 2017 cumulative update KB4013429 I have 3 tuners cards, 1 PC1 and...
Replies
9
Views
3K
Awesome U rock MM !!! Yep those patch files did the job What a fantastic result. !!! I am here telling my kids someone from the other side of the world has helped sort my problem out in about 10 minutes Thank you SO MUCH !!! That's really wonderful support :-)
Awesome U rock MM !!! Yep those patch files did the job What a fantastic result. !!! I am here telling my kids someone from the...
MediaPortal Version: 1.12.0 Description After installing MP 1.12.0 - Turn on Panasonic TV and Onkyo Receiver (TX SR606) - so...
Replies
4
Views
3K
Thanks for the update. :)
Thanks for the update. :)
Hi, Yesterday I updated my mediaportal 1.14 to the new 1.15. Since today I got problems where the video stops playing without any...
Replies
10
Views
3K
Hi, my solution for that problem: Deactivated power saving options for this device and everything started working flawless :)
Hi, my solution for that problem: Deactivated power saving options for this device and everything started working flawless :)
Hi, since MP 1.10.0 Final that I installed two weeks ago, MP hangs nearly everytime I stop TV :( Before that I used MP 1.7.0 and...
Replies
12
Views
3K
sorry, but i think was an bad update of MySQL will be the culprit, if needed i think have an old dump database. (at 01/2016). :unsure:
sorry, but i think was an bad update of MySQL will be the culprit, if needed i think have an old dump database. (at 01/2016). :unsure:
MediaPortal Version: 1.15.0 Description Hello. First all, my system has MP2-server installed on the same machine ( maybe related...
Replies
15
Views
3K
Marking thread as "bug"...
Marking thread as "bug"...
MediaPortal Version: 1.12.0 Description Hi, whenever I try to play a movie that has a .sub and a .idx subtitle files, MediaPortal...
Replies
13
Views
3K
Have posted this issue & resolution here.
Have posted this issue & resolution here.
MediaPortal Version: 1.17.0 Description During testing of my new USB Hauppauge WinTV-DualHD stick, I was testing the functionality...
Replies
3
Views
3K
Thank you HomeY. I see :)
Thank you HomeY. I see :)
Hello, I would like to report one issue I found out during my 2 weeks testing with audio. 1. Dolby Home Theater V4 (analogue...
Replies
2
Views
3K
Hello guy's i think found an solution for solve my issue of short timing for an 100% server use. it's the : "System unattended sleep timeout" setting Power Options - Add "System unattended sleep timeout" - Windows 7 Help Forums...
Hello guy's i think found an solution for solve my issue of short timing for an 100% server use. it's the : "System unattended...
Hello guy's, i have myself an issue with PowerScheduler. i explain my situation MultiSeat with dedicated TVserver ( nothing else...
Replies
6
Views
3K
Branch pushed :)
Branch pushed :)
Hi, I'm running Mediaportal 1.13(with a patch from this thread: https://issues.team-mediaportal.com/browse/MP1-4719 ). Now my...
Replies
10
Views
3K
I further add that access to particular parts of the CAM menu (eg. entitlements, supported CA system IDs) may be affected by the CAM usage at the time. In other words, if the CAM is busy decrypting channels, it may not be possible to access certain details. That would be a limitation imposed by the CAM and/or DD driver MTD design. As...
I further add that access to particular parts of the CAM menu (eg. entitlements, supported CA system IDs) may be affected by the...
MediaPortal Version: 1.16.0 pre-release Description When I open the CI entitlement menu I get nothing, I can only see the full...
Replies
13
Views
3K
Regeszter: My server has no client running on it (i.e. dedicated and 'headless'), thus the problem with having _lastUserTime updated to prevent entering standby prematurely. Dev Group: Please consider the following patch for TvEngine3\TVLibrary\Plugins\PowerScheduler\PowerScheduler.cs in Mediaportal 1 Main branch. NOTES: 1) I didn't...
Regeszter: My server has no client running on it (i.e. dedicated and 'headless'), thus the problem with having _lastUserTime...
MediaPortal Version: 1.14.0 Description Dear Dev, I have a machine with TVServer installed and use the PowerScheduler to shutdown...
Replies
7
Views
3K
Yep done :)
Yep done :)
Hi, I'm running 1.11 pre release(with another fix from...
Replies
14
Views
3K
MP1 MP2 1.16.0 Tuners lost DE
Thanks for the update. :) This doesn't sound like a good long term solution. I'm 99% sure the problem is/was outside MP, but either way, there's nothing I can do without more information. I suggest to make a backup then try to update to v1703 again.
Thanks for the update. :) This doesn't sound like a good long term solution. I'm 99% sure the problem is/was outside MP, but...
MediaPortal Version: 1.16.0 Description Hello, could you please help me with very annoying problem, which occured to me few days...
Replies
5
Views
3K
Ok, it's safe to say the issue is fixed with this patch, haven't had a crash since installing it on production
Ok, it's safe to say the issue is fixed with this patch, haven't had a crash since installing it on production
MediaPortal Version: 1.18.0 Description Don't know if it was already present in 1.17 (did use that for a really short time, 1.16...
Replies
7
Views
3K
MP1 MP2 1.10.0 Selected items disapper (still) (1 Viewer) DE
Yes, i've done it already: https://forum.team-mediaportal.com/attachments/selected-items-jpg.154621/
Yes, i've done it already: https://forum.team-mediaportal.com/attachments/selected-items-jpg.154621/
Hi, after installing the 1.10-Version an old bug still exists. This topic is discussed here...
Replies
10
Views
2K
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think. I did try to record without avtive front-end and without power-saving options active: same result as before. But since it is only to change the senning to never stop the frontend, I can lile with it. Could be...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think. I did...
MediaPortal Version: 1.10.0 Description After some testing I realized that the recordings became useless whenever the frontend...
Replies
12
Views
2K
MP1 MP2 1.16.0 Error message on install (1 Viewer) DE
Hi, Yep this error time on time and related to registering font, so not a big deal but sometimes after a reboot it works, for now no one was able to fix it properly :(
Hi, Yep this error time on time and related to registering font, so not a big deal but sometimes after a reboot it works, for now...
MediaPortal Version: 1.16.0 Description This happened on a multiseat setup on clients as well as on the server. Started with 1.16...
Replies
1
Views
2K
Standing by, not holding breath... :D
Standing by, not holding breath... :D
MediaPortal Version: 1.14.0 Description Hello, Now i have an AVR, MP is restored in wrong resolution, this issue don't appear...
Replies
14
Views
2K
Quick check indicates the problem is solved! Thanks again!
Quick check indicates the problem is solved! Thanks again!
MediaPortal Version: 1.18.0 Description In some skins when a modal dialog (f.e. menu button on recorded tv list, choosing a...
Replies
6
Views
2K
Hi, i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no informations on the last channel, i do the live-tv-modul on and off, after this i can programm in the epg. Til today there is no solution. Go on my other 2 threads of this problem...
Hi, i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no...
Hello Com, i have noticed an issue. I was aware of was in MP 1.9 but now are not resolved. I have wrote it down here. Melmak have...
Replies
11
Views
2K
This sounds like the bug that has already been fixed in MP 1.18. Note that the single episode in the list is not also included in the folder, so when the single episode is deleted by mistake, there is no corresponding deletion of the item in the folder (because it does not exist in the folder). Try MP 1.18 and see if it fixes your...
This sounds like the bug that has already been fixed in MP 1.18. Note that the single episode in the list is not also included in...
MediaPortal Version: 1.17.0 Description I'm reporting a long term bug where if a TV station specifies the title of an episode with...
Replies
1
Views
2K
So weird! I enabled "Use MediaInfo BDs" and blu ray playback was successful again. As I don't like to enable this option, I subsequently disabled it and blu ray playback continued to work as normal! It was the same effect on all 3 computers. In my book, this is still a bug but at least there is a workaround.
So weird! I enabled "Use MediaInfo BDs" and blu ray playback was successful again. As I don't like to enable this option, I...
Blu Ray playback appears to be broken in Mediaportal 1.15. On all 3 of my computers, I receive the error "Unable to play: index"...
Replies
3
Views
2K
JIRA created ...
JIRA created ...
MP 1.16.0 Skin: Default Wide HD Hi, i've noticed that skinengine doesn't scale proper for 4K resolution. It is working fine with...
Replies
8
Views
2K
Just to close off this thread... Solution for no EPG data described here: Norwegain (Canal Digital) DVB-S EPG stopped working Language code "NOR" being unavailable for selection in MP and/or TV Server Configuration is system-specific. The list of language codes comes from Windows/.NET cultures. With a little code, it's possible to...
Just to close off this thread... Solution for no EPG data described here: Norwegain (Canal Digital) DVB-S EPG stopped working...
now and then , I need the edit the mediaportal.xml to make Norwegian audio default for DVB-S - because the GUI does not allow me to...
Replies
8
Views
2K
Thanks for reporting back. I'm always happy to hear positive results. :) I don't know, but quite possibly. In theory trying to tune to the same channel over and over (or even tuning to different channels lots of times) as the EPG grabber was doing shouldn't cause a BSOD with a good driver. I think of the EPG grabber as...
Thanks for reporting back. I'm always happy to hear positive results. :) I don't know, but quite possibly. In theory trying to...
Hi, I have been using MediaPortal since at least December 2012 and am full of admiration for it and the developers and supporters...
Replies
6
Views
2K
Top Bottom