maybe not related but I had a problem with Outlook 2013 sending after the update.
This was fixed using
sfc /scannow
in a command window run as administrator
maybe not related but I had a problem with Outlook 2013 sending after the update.
This was fixed using
sfc /scannow
in a...
Have a weird problem after I decided to do a clean install of MediaPortal on my just updated windows 10 box.
I can install...
Had the same problem I believe. After windows 10 upgrade, the green button did not start MP anymore The build above solved the problem. Got some error during installation about a faulty 32 bit pointer, but it seems to work anyway. Thank you for the build!
Had the same problem I believe. After windows 10 upgrade, the green button did not start MP anymore The build above solved the...
Hello,
I would like to report one trouble with MP tray, after upgrade from Windows 7 to 10 (no other changes) it is not possible...
Ok, Seems 'solved' then.
I tagged the thread as [no bug].
If the results after remuxing are still faulty, please continue here. I (or anyone else) will change the prefix accordingly.
greets
Ok, Seems 'solved' then.
I tagged the thread as [no bug].
If the results after remuxing are still faulty, please continue here. I...
MediaPortal Version: 1.12.0
Description
Hi all,
since Version 1.12 the dynamic refresh rate changer is simple not working any...
Just upgraded my PC to Windows 10 with a fresh install of Mediaportal 1.12 (needed to use Run as administrator)
So far the only problem I have noticed is a flickering TV Guide which is most obvious when you place another window on top and scroll (this page in Microsoft Edge for example)
For some reason it doesn't do this if...
Just upgraded my PC to Windows 10 with a fresh install of Mediaportal 1.12 (needed to use Run as administrator)
So far the only...
Just upgraded my PC to Windows 10 with a fresh install of Mediaportal 1.12 (needed to use Run as administrator)
So far the only...
for cover only *.tbn can be an alternativ.
after, you can have
poster.jpg / landscape.png ...
about suntitle why don't read supported extension from MP ?
for cover only *.tbn can be an alternativ.
after, you can have
poster.jpg / landscape.png ...
about suntitle why don't read...
I am using MP 1.12.0 final, on 32-bit Windows Vista. It is my custom to move TV recordings from the "Recordings" folder to a...
This is exactly what I'm seeing here ;-)
Is there a chance that a MP 1 dev adds this funktionality or should I send back the device as long it is possible?
This is exactly what I'm seeing here ;-)
Is there a chance that a MP 1 dev adds this funktionality or should I send back the device...
Hello,
I have bought a new living room client.
A Pipo X8. This is a windows tablet in a small desktop box.
PiPo x8
This device does...
Awesome U rock MM !!!
Yep those patch files did the job
What a fantastic result. !!!
I am here telling my kids someone from the other side of the world has helped sort my problem out in about 10 minutes
Thank you SO MUCH !!!
That's really wonderful support
:-)
Awesome U rock MM !!!
Yep those patch files did the job
What a fantastic result. !!!
I am here telling my kids someone from the...
MediaPortal Version: 1.12.0
Description
After installing MP 1.12.0
- Turn on Panasonic TV and Onkyo Receiver (TX SR606) - so...
Can't confirm. works fine here:
MPTagThat can write to DSF since several months already. In my Dev environment.
Need to finish reading cover art from Last.fm and then i release
Can't confirm. works fine here:
MPTagThat can write to DSF since several months already. In my Dev environment.
Need to finish...
Hi,
have noticed a possible bug, please confirm. Steps to reproduce:
1. Playback a .dsf audio file with Multi-Value Tags (here...
Hello,
3 days after testing everiday the patch of sebastiii for the audio part.
3 days without need to re-start MP after an resume
for inforation regezster : the LiveTV was always on before Client sleep
i join my log, if you found other hidden issue
@Owlsroost : for your modifed tsreader/tswritter
PS : but, i have always the...
Hello,
3 days after testing everiday the patch of sebastiii for the audio part.
3 days without need to re-start MP after an resume...
i do'nt know if it's the issue, because my HTPC go in sleep mode in 2-3 seconde after select the power option.
and when i resume...
I have a problem that in the NowPlaying screen the embedded covers are not shown when I start a playlist. But when I select a single track out of a folder, it is showing the cover. I have the problem only with the playlists.
I have a problem that in the NowPlaying screen the embedded covers are not shown when I start a playlist. But when I select a...
I have a problem that in the NowPlaying screen the embedded covers are not shown when I start a playlist. But when I select a...
Don't know, where and why this is removed.
Will have a look, when i find some time.
I wouldn't have even noticed that. You have the correct information displayed at the bottom anyhow.
Don't know, where and why this is removed.
Will have a look, when i find some time.
I wouldn't have even noticed that. You have...
I wrote to MP1.11.0 PreRelease:
Hi,
i have still some important issues in the MP music - area:
Reference for my consideration is...
Trying to program several events of a TV-Show (e.g. Series Eps) via "Upcoming Episodes" does not take individual Pre- & Post-Record settings into account.
Changes to the Pre- & Post-Record settings are only affecting the Show entry point where from EPG-Menu one is switching to "Upcoming Episodes" Menu.
Steps to reproduce:
Step 1
Go...
Trying to program several events of a TV-Show (e.g. Series Eps) via "Upcoming Episodes" does not take individual Pre- & Post-Record...
Trying to program several events of a TV-Show (e.g. Series Eps) via "Upcoming Episodes" does not take individual Pre- & Post-Record...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think.
I did try to record without avtive front-end and without power-saving options active: same result as before. But since it is only to change the senning to never stop the frontend, I can lile with it. Could be...
Yes, I have several HDD in the system, but if they give a glitch when spinning up or down is not much of an issue I think.
I did...
MediaPortal Version: 1.10.0
Description
After some testing I realized that the recordings became useless whenever the frontend...
Big thanx for that!
Clue:
With Buffer 0,19 I've a few moments of whitenoise at the beginning of all my DTS-Wavs (5.1).
0,40 works much better for me.
Perhaps: Averyone has to find his own best.
Big thanx for that!
Clue:
With Buffer 0,19 I've a few moments of whitenoise at the beginning of all my DTS-Wavs (5.1).
0,40 works...
MP 1.10.0
@hwahrmann
Hi!
With MP 1.10.0 i've noticed some playback issues. Steps to reproduce ->
1. Configure MP for music...
It happened again today.
I was actually doing something else ( streaming a video from LightBox -, which was working fine, and I have done an number of times before successfully) then suddenly my PC froze, and for about 2 mins I couldn't do anything. The mouse cursor worked (and had the revolving circle indicating it was busy) , but...
It happened again today.
I was actually doing something else ( streaming a video from LightBox -, which was working fine, and I...
MediaPortal Version: 1.10.0
Description
After upgrading from 1.9.0 to 1.10.0 TV server stops randomly or the connection to it is...
Hi,
There is problem using PCTV tuners with TVE. Probably some bug on drivers. DVB-T side of this triple stick is using normal tuning parameters, but DVB-C side must have symbol rate in x 1000 format. In multi tuner system SR x 1 and SR x 1000 cannot be used on the same channel (if they are on the same provider) since TVE will combile...
Hi,
There is problem using PCTV tuners with TVE. Probably some bug on drivers. DVB-T side of this triple stick is using normal...
Hi,
There is problem using PCTV tuners with TVE. Probably some bug on drivers. DVB-T side of this triple stick is using normal...
Hi,
i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no informations on the last channel, i do the live-tv-modul on and off, after this i can programm in the epg. Til today there is no solution. Go on my other 2 threads of this problem...
Hi,
i had also this problem, but i had downgrade to MP1.7 . There is sporadic the same, but it doesnt matter me. If there no...
Hello Com,
i have noticed an issue. I was aware of was in MP 1.9 but now are not resolved. I have wrote it down here.
Melmak have...
Ahhh, I have a WinTV CI myself and I recall that happening to me too. I thought I had just done something wrong, but now I guess the CI driver installer is a bit weird/buggy.
Yeah, thanks for reporting your solution. Very happy to hear that the problem is resolved. :)
Ahhh, I have a WinTV CI myself and I recall that happening to me too. I thought I had just done something wrong, but now I guess...
Hi,
I made a fresh install of win7 and MP 1.10.0 and everything works fine except that the WinTV-CI tab dissappeard and...