Area 51 - Testing Area (26 Viewers)

This forum stores test builds of bugfixes and features that are currently in development and considered unstable.
  • Sticky
Hi Lars, This is exactly what we have done with the 1.2.3 test build, since it is important that fixes work together. With other big feature fixes, there is a very real risk that if we combine two fixes, and only one is considered ready, then neither of them will be in the next release because the test build was not up to...
Hi Lars, This is exactly what we have done with the 1.2.3 test build, since it is important that fixes work together. With...
Dear everyone, I wanted to expand upon some of what Chris (infiniteloop) said here...
Replies
2
Views
12K
  • Locked
  • Sticky
How this will work: Once a developer reaches the point in development of his feature/bugfix/rework, where it can be tested by the community, he creates an thread in this forum section There he will share information about the change itself, a changelog and provide a download link to an installer Everyone can then download this...
How this will work: Once a developer reaches the point in development of his feature/bugfix/rework, where it can be tested by...
How this will work: Once a developer reaches the point in development of his feature/bugfix/rework, where it can be tested by...
Replies
0
Views
10K
  • Sticky
Users feedback: Great new feature - LUV it! In Version 2011-08-10 I noticed that (..)
Users feedback: Great new feature - LUV it! In Version 2011-08-10 I noticed that (..)
First post: Description of the change In here I describe what my awesome new feature will do. So that users get an idea what I...
Replies
3
Views
10K
It appears that the links on the page for the downloads of pre-release 1.33 and 1.33 x64 are reversed. I just accidentally installed x64. My bad for not looking closely.
It appears that the links on the page for the downloads of pre-release 1.33 and 1.33 x64 are reversed. I just accidentally...
It appears that the links on the page for the downloads of pre-release 1.33 and 1.33 x64 are reversed. I just accidentally...
Replies
0
Views
354
Pfff, amazing MadVR instead of (the good one) EVR. Watched 240p movies given by my family on Full HDTV. What can I say : For 240p, less macroblocks, better smoothed. For all : More transparency, more mirroring (example, reflects pictures on cars, on flasks of water). When available, it is worth to take time to configure MadVR, at the...
Pfff, amazing MadVR instead of (the good one) EVR. Watched 240p movies given by my family on Full HDTV. What can I say : For 240p...
Hello all, I found a possible conflict between madVR and MP ViewModeSwitcher Plugin. But, because it's hardware and specific...
Replies
14
Views
3K
I transferred the CECRemote x86/x64 versions to the Archive, and made a new version of CECRemote for AnyCPU, and added a repository to MPE. https://github.com/andrewjswan/CECRemote/releases
I transferred the CECRemote x86/x64 versions to the Archive, and made a new version of CECRemote for AnyCPU, and added a repository...
I have decided to rework this post, becouse is no longer relevant. The SharpDX version is already included in MediaPortal since...
Replies
959
Views
75K
Thanks for confirmation, it will be part of next MP release then :P :P
Thanks for confirmation, it will be part of next MP release then :P :P
Description of Change This branch will permit to have enabled audio delay (based for FFDShow Engine) but this time for LAV Audio...
Replies
6
Views
5K
Hi, 1.20 "alpha" build is ready to testing. MP1-4903 PIN protection for channel handling inside TV client MP1-3705 Add #iswatched property to recorded TV MP1-4914 Rework watched status of recordings MediaPortalSetup_1.19.000_2018-03-22-18-37.zip
Hi, 1.20 "alpha" build is ready to testing. MP1-4903 PIN protection for channel handling inside TV client MP1-3705 Add #iswatched...
Hi Community, I added the following functions to the TvPlugin remove/delete a channel from server add channel to a group remove...
Replies
11
Views
5K
Any comment? :):whistle::coffee:
Any comment? :):whistle::coffee:
Trying to expand the amount of information about the pictures. I want to add data from the EXIF / IPTC. Like: IPTC Keywords...
Replies
7
Views
3K
@mm1352000 I would like to include this, i will prepare branch + jira for it :)
@mm1352000 I would like to include this, i will prepare branch + jira for it :)
-DISCLAIMER- This patch is meant only for users that are having a motorized setup and are having issues with it. If your tuner...
Replies
2
Views
5K
I don't think this is something you should have to care about. If people are bothered by performance issues related to the all channels group, they can use the "hide all channels group" setting or configure the all channels group to be the last group. If the current group is the all channels group, the channel is guaranteed to be...
I don't think this is something you should have to care about. If people are bothered by performance issues related to the all...
The proposed change affects our channel selection feature when using channel numbers as opposed to channel group indices. One can...
Replies
23
Views
9K
U definitively can watch the UHD channels on astra an any other Satelite. I do this since the Version 1.15 (with TS Reader Fix).. u only need a HEVC cabable grafics card like Geforce GTX 9xx or 10xx . Be aware of haveing about 3GB of VRAM
U definitively can watch the UHD channels on astra an any other Satelite. I do this since the Version 1.15 (with TS Reader Fix).. u...
There have been several long-running threads on the forum for testing various improvements to the TV functionality of MP1. We have...
Replies
83
Views
27K
Looks like there is an extra space between "Windows" and "OSD" in the checkbox item btw :)
Looks like there is an extra space between "Windows" and "OSD" in the checkbox item btw :)
We are planning to integrate that "Hide windows volume OSD" feature originally developed by @Marcus Venturi into MP1. See JIRA...
Replies
26
Views
8K
Well, there is presumably at least one person who uses scrolling shortcuts... :D https://forum.team-mediaportal.com/threads/mp2-531-scroll-animations-break-scrolling-by-first-letter.135352/ -- from CyberSimian in the UK
Well, there is presumably at least one person who uses scrolling shortcuts... :D...
See JIRA ticket. See Dev Team forum post. Test installer. To test those changes you need to go into MP1 configuration in "Remote...
Replies
68
Views
22K
I've added Kinect voice control support to CIC. I'm hopeful I should be able to provide TV channel switching through Kinect voice control at some point.
I've added Kinect voice control support to CIC. I'm hopeful I should be able to provide TV channel switching through Kinect voice...
I'm planning to add support for Kinect Voice Control to MP1. See MP1-4793. Basic living room testing shows that even with...
Replies
1
Views
2K
MP1 MP2 [WiP] madVR support in MP1 (5 Viewers) DE
After many install, uninstall, reinstall during 3 days (what a pain), I finally found the culprit. Nothing related with MadVR...
After many install, uninstall, reinstall during 3 days (what a pain), I finally found the culprit. Nothing related with MadVR...
Description of Change This branch will permit to have madVR renderer to MP1, thanks to Tourettes for this and Madshi. This branch...
Replies
6K
Views
690K
MP1 MP2 [WiP] BD-J Feature DE
Some news?
Some news?
Description of Change This branch will permit to play most on BD-J blu-ray, thanks to Tourettes for this and libbluray team...
Replies
52
Views
19K
Added in 1.16 Pre ...
Added in 1.16 Pre ...
Movie Collection support in MyVideo: Add skin propertiers: #usergroups - like Group1 / Group2 / Group3 #moviecollection...
Replies
38
Views
12K
Then you can already do some basic testing.
Then you can already do some basic testing.
MP1 can now be installed with multiple HID profiles. Users can themselves customize multiple HID profiles. See MP1-4766. Try it...
Replies
11
Views
5K
Here are Open Hardware Monitor binaries with support for Sharp Display Manager. Should work just fine together with MiniDisplay from MP 1.14. No support for single line layout yet.
Here are Open Hardware Monitor binaries with support for Sharp Display Manager. Should work just fine together with MiniDisplay...
Here are Open Hardware Monitor binaries with support for Sharp Display Manager. Should work just fine together with MiniDisplay...
Replies
0
Views
3K
Review is now available from there: https://issues.team-mediaportal.com/fisheye/cru/MP1CR-768
Review is now available from there: https://issues.team-mediaportal.com/fisheye/cru/MP1CR-768
This is ready for integration, you can try the installer provide on the JIRA MP-4702. For testing see also the latest...
Replies
1
Views
3K
So, not needed anymore, i pulled your pullrequst tot the branch directly, anyway thank you
So, not needed anymore, i pulled your pullrequst tot the branch directly, anyway thank you
Description of Change This branch will change code of enumeration player streams. it's planing mix them with information from the...
Replies
146
Views
22K
Merged! Eject issues should be tackled separately.
Merged! Eject issues should be tackled separately.
See MP1-4750. Those changes apply to our HID input handler configuration. Users with custom configuration will need to integrate...
Replies
11
Views
6K
Ok I'm putting this on master real soon now.
Ok I'm putting this on master real soon now.
Following an issue reported by @ravenrocks there I worked on consolidation of our input device event propagation loop and put in...
Replies
8
Views
3K
In my opinion: yes, absolutely.
In my opinion: yes, absolutely.
Last time we had more problems caused by missing WMP component in Windows version N. And people (as it seems) have really no idea...
Replies
68
Views
16K
Hi @mm1352000 - I'd like to try and get your new RTSP/Live555 code (and my TsReader/TsWriter changes) into MP1 - can you check your PMs/conversations please ?
Hi @mm1352000 - I'd like to try and get your new RTSP/Live555 code (and my TsReader/TsWriter changes) into MP1 - can you check your...
Hello everybody Introduction Over the past couple of months we've been working hard to update the RTSP streaming library...
Replies
60
Views
29K
MP1 MP2 [Help Us!] Windows native ISO support (1 Viewer) DE
.IMG is in the default list. I think .NRG as well, but those files are rare. I have 1, and it doesnt work. .NRG presents a windows popup there is an unsupported format ..bla bla bla.. yes/no doesnt play either way. :p None issue IMO. I did test a lot of the iso's I have. Most of em showed no issue. I am used to issues regarding...
.IMG is in the default list. I think .NRG as well, but those files are rare. I have 1, and it doesnt work. .NRG presents a windows...
Hi, since windows 8 there is native support for ISO files. Is it possible, that MP1 does support this feature, so there is no need...
Replies
46
Views
14K
Hi, this branch will improve the loading of the share list in My Video. The results are depend on the network bandwidth. Unfortunately there is no information about loading of the share list in My Video so I created a patched build based on current master just for test the original speed. How to test it? Install the...
Hi, this branch will improve the loading of the share list in My Video. The results are depend on the network bandwidth...
Hi, this branch will improve the loading of the share list in My Video. The results are depend on the network bandwidth...
Replies
0
Views
1K
By migrating MPTray to HID those changes are also fixing MPTray functionality which appears to be broken on Windows 10, at least for some users, see: https://forum.team-mediaportal.com/threads/mp-tray-windows-10.131577
By migrating MPTray to HID those changes are also fixing MPTray functionality which appears to be broken on Windows 10, at least...
See: https://issues.team-mediaportal.com/browse/MP1-4658 Here is an installer you guys can test: http://tinyurl.com/pg3dxwo...
Replies
7
Views
2K
So i think this line need to be changed in log :) Log.Debug("GetRootExt(): ShareOffline : '{0}' doesn't exists or host is offline, don't use it for later or enable WOL feature", share.Path); I think that it's why i mage an error. This should be more like : Log.Debug("GetRootExt(): ShareOffline : '{0}' doesn't exists or host is...
So i think this line need to be changed in log :) Log.Debug("GetRootExt(): ShareOffline : '{0}' doesn't exists or host is offline...
Description of Change This branch try to fix the long start and navigation in Video / Music / Picture when share is offline. It...
Replies
10
Views
4K
  • Locked
Me too :)
Me too :)
A significant problem for some users is that when playing live TV, differences in the playback rate of the PC and the rate at which...
Replies
297
Views
59K
Glad it works then. 1. Could be done, but no not as it stands. 2. Same as 1 I guess. 3. Could be done too but it's not currently possible either.
Glad it works then. 1. Could be done, but no not as it stands. 2. Same as 1 I guess. 3. Could be done too but it's not currently...
This contribution is part of MP 1.12 Here is the latest installer for testing: http://tinyurl.com/mb29l76 Here is the branch...
Replies
14
Views
5K
MP1 MP2 [MP1-4578] Crashes after standby (1 Viewer) DE
Well I seem to have serendipitously came across a solution to my problem. It turns out that it is my TV to blame for my blank screen and probably MP freezing on me. I have discovered that the rear HDMI ports on my 6 year old Sony TV behave differently to the side ones. If I connect my HTPC to the rear ones I will get a picture but as...
Well I seem to have serendipitously came across a solution to my problem. It turns out that it is my TV to blame for my blank...
Description of Change This branch try to fix MP crash or freeze after S3 (Standby), current MP version has an issue if MP is not...
Replies
90
Views
19K
Top Bottom