When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your post!
Useful Wiki information:
Known Issues
Troubleshooting
FAQ
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your...
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your...
I recently updated to a new version of Reclock and I can't get any onscreen displays for testing VSync, tearing etc. The usual hotkeys do nothing. I've checked these are correct in the settings. Double-clicking the green Reclock icon in the system tray shows the settings for about 1/4 of a second and disappears. I've got the DXVA...
I recently updated to a new version of Reclock and I can't get any onscreen displays for testing VSync, tearing etc. The usual...
Hello,
I've been struggling with stuttering playback for years now, and struggling with reclock aswell. There has always been...
Excellent. :)
Sorry, I think there is probably nothing you can do.
I can only recommend to make sure that the settings here are correct:
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/02_TV_Servers/5_Scan_Analog#Settings
Excellent. :)
Sorry, I think there is probably nothing you can do.
I can only recommend to make sure that the settings here are...
MediaPortal Version: 1.0.4.24281
MediaPortal Skin: x-factor
Windows Version: Windows 7 64bit
CPU Type: AMD Athlon 64 x2 5400+ -...
If you're using mkv's, why not use mkvmerge to embed the subtitles in the mkv file? Then all you need to do is make sure Haali autoloads vsfilter (per Goose' codec guide), and you don't need to mess around with separate files, or any post processing configuration in MP
mkvmerge will also take an avi file and external subs and merge...
If you're using mkv's, why not use mkvmerge to embed the subtitles in the mkv file? Then all you need to do is make sure Haali...
Hi!
I've searched the forums and the wiki but havn't found a solution that works for me.
Could somebody please make a guide...
so the Xonar 1.3 HDAV slim card is not suitable unless you use the Arcsoft audio renderer in MP ...and even then it locks you out from playing anything else besides dts-hd or truehd after playing dts-hd or truehd files?
i dont want to buy any ati cards
i only have a pci slot left in my MP pc ..no pcie slots left...so.. the xonar...
so the Xonar 1.3 HDAV slim card is not suitable unless you use the Arcsoft audio renderer in MP ...and even then it locks you out...
With this step by step guide we will show how you can bitstream HD audio to a compatibel reciever in combination with a Asus Xonar...
What would be the best way to go now? My brother has this issue, but I am a little hesistant about installing the newest svn. Especially, because I just setup the entire system at his place and I am currently not around to repair it if the svn breaks it. Should I install the newest snapshot or is there another way to just fix this...
What would be the best way to go now? My brother has this issue, but I am a little hesistant about installing the newest svn...
Hi @all,
can anyone seen this or have solution?
Problem is, that it seems, that MP is not disposing Haali splitter resources...
Not sure if it's been mentioned already but LAV Audio Decoder is supposed to support DTS-HD (including MA) if the "dtsdecoderdll.dll" file from ArcSoft is in the LAV install folder.
I assume it's working on my setup but I have no way of testing it since I have nothing to bitstream to that will tell me whether it's receiving DTS or...
Not sure if it's been mentioned already but LAV Audio Decoder is supposed to support DTS-HD (including MA) if the...
Hi,
when I try to play an mkv with DTS-HD audio, MP (1.1.2 and SAF 4.0) do nothing, simply video don't start.
I've set ffdshow...
Sorry if i revive such an old thread but it seems the right place for my issue...
I have a HD4600 (core i5 4th gen) latest driver from intel website on Windows 10, if i enable IQS in LAV video decoder this introduce a big instability in my whole setup. I end up with mediaportal freezing when going back from fullscreen video to the...
Sorry if i revive such an old thread but it seems the right place for my issue...
I have a HD4600 (core i5 4th gen) latest driver...
Since I changed a client from NVIDIA to Intel HD graphics 3000 I'm looking for the best codec to replace LAV CUVID I was using...
If you re-create the VIDEO_TS folder structure from the DVD disc to your Hard Drive , then PowerDVD (or other software DVD players), will treat the folder structure as if it were the physical DVD disc. With PowerDVD 10, either you simply launch the application, then you switch to the "Video" tab and navigate to the VIDEO_TS folder on...
If you re-create the VIDEO_TS folder structure from the DVD disc to your Hard Drive , then PowerDVD (or other software DVD...
EDIT: 23-May-10: This has now been fixed in Build 1705 (14-May-10).
EDIT 8-April-10: This has now been confirmed by Cyberlink as...
can someone give me few tips to configurate ffdshow? better, post the ffshow-config.
i ve problems to use ffdshow -> high cpu, deinterlace etc
i hope my system is enough for ffdshow.
regards
can someone give me few tips to configurate ffdshow? better, post the ffshow-config.
i ve problems to use ffdshow -> high cpu...
TV-Server Version: 0.3
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: Blue Two - Wide
Windows Version: 5.1.2600 Service Pack...
Hi
I am new here and I have a problem with the VC-1 Codec.
I can watch any film on my pc but if I watch via MediaPortal any film with vc-1 can't be displayed.
I digged through the forum looking for a plain solution (I am no video specialist) but could not find any.
I include a picture maybe somebody can give me a hint what to do...
Hi
I am new here and I have a problem with the VC-1 Codec.
I can watch any film on my pc but if I watch via MediaPortal any film...
I am having major problems with VC-1. Let me explain.
I have Blu-ray rips wrapped as MKV. Now these work fine with the Microsoft...
You can also try LAV set to DXVA (copy back) as this is supposed to allow connection to post processing. Will increase cpu usage as data is 'is copied back' from GPU memory to CPU memory. ATI being more cpu intensive so than NV in this respect.
You can also try LAV set to DXVA (copy back) as this is supposed to allow connection to post processing. Will increase cpu usage as...
Hi, I am just taking a new look at my post processing and seem to have forgotton everything.
I currently use LAV splitter and LAV...
thanks, this did the trick
I continue in this thread:
https://forum.team-mediaportal.com/installation-configuration-support-53/configuration-1-0-2-vista-w7-66437/
thanks, this did the trick
I continue in this thread...
I had many trouble with the haali media splitter. First it took a long time opening mediafiles in windows media player. The next...
Hi there,
Am I correct in thinking that this thread is applicable to something I started here (#25 onwards)?
https://forum.team-mediaportal.com/threads/beginners-guide-to-mediaportal-codecs-and-what-to-use.118945/page-3
Reading that last post, does upmixing in Mediaportal only work if you choose 6.1 rather than 5.1?
Hi there,
Am I correct in thinking that this thread is applicable to something I started here (#25 onwards)...
MediaPortal Version: V1.1
MediaPortal Skin: Streamed MP Beta v0.9.601 [02 Sep 2009]
Windows Version: Windows 7 Ultimate x64 NL...
AW: Definitive DTS-MA/DTHD HD Audio in MP thread... Let's do it!
The issue seems to be known, I found a bugtracker topic on SourceForge.net: ffdshow: Detail: 3028871 - Plays DTS-MA instead of regular DTS when SPDIF is being used. Unfortunately the issue is still open since July 2010 :(
P.S.
M2TS is also not working.
AW: Definitive DTS-MA/DTHD HD Audio in MP thread... Let's do it!
The issue seems to be known, I found a bugtracker topic on...
Let's make this the end all be all thread for getting newfangled HD audio to playback properly in MP
I cannot for the life of me...
I have been using ffdshow upscaling for over a year, now. I've discovered in recent issues with SAF*.00 that it is also ffdshow version dependent. I f I overwrote the ffdshow.ax version installed by SAF with one I knew upscaled, then my settings would work. Otherwise, the video output would be same as input.
I have the profile set...
I have been using ffdshow upscaling for over a year, now. I've discovered in recent issues with SAF*.00 that it is also ffdshow...
Has anyone already tried powerdvd 10 h.264 codec ? I am now using divx h.264 with hardware acceleration and i am very happy with...
I've found ffdshow does a better job upmixing to 5.1 than my 3-year-old Sony receiver, interestingly enough. So my advice is to experiment with 2.0, etc audio to find out whether you prefer letting ffdshow or your receiver do it.
I've found ffdshow does a better job upmixing to 5.1 than my 3-year-old Sony receiver, interestingly enough. So my advice is to...