Codecs, External Players (11 Viewers)

Post problems with Codecs or External Players here!
DXVA2 has proven to be far more resilient in playback. No freezes, sometimes when a problematic part is encountered it does stay on the picture an extra second when skipping but does not freeze which is good. My only complaint is when holding down the skip button the time location is not updated until I let go of skip. With the...
DXVA2 has proven to be far more resilient in playback. No freezes, sometimes when a problematic part is encountered it does stay on...
Hello, What is the easiest way to have the ability to open a file, from within MP, using VLC? I use MP to playback TV recordings...
Replies
10
Views
5K
Just another update: I notice that if I play a 4K 3D video, pause and then change to another 4K 3D video Mediaportal hangs and needs restarting. If I do the above but go via live TV (4K 3D --> Live TV --> 4K 3D) it works OK...
Just another update: I notice that if I play a 4K 3D video, pause and then change to another 4K 3D video Mediaportal hangs and...
I have a Nvidia GTX960 graphics card and I'm using the latest Mediaportal and latest LAV filters set with DXVA2(Native) and UHD and...
Replies
32
Views
12K
Sorry you can't play my files. Basically they are broadcast as 3 x Mpeg-Audio 2.0 tracks (one track has left/right, one has center/LFE, and one has surround left/right). So the only way to get them to "usable" is to convert them...DTS-HDMA is the best choice since it keeps it "lossless". While it's still a transcode, it's a transcode...
Sorry you can't play my files. Basically they are broadcast as 3 x Mpeg-Audio 2.0 tracks (one track has left/right, one has...
I have some .TS files that wouldn't play in MediaPortal. The solution was to check the box in MediaPortal Configuration that says...
Replies
9
Views
3K
Thanks for getting back! Problem wasn't with TV btw!!! Following upgrading of OV to 2.3.1.0.....I noticed that ordinary Videos would not play. ....tried several types, and always got the 'Unable to play' message...with comments on audio/video codecs!! Just before you replied....I re-installed 1.17 final.....and problem appears to have...
Thanks for getting back! Problem wasn't with TV btw!!! Following upgrading of OV to 2.3.1.0.....I noticed that ordinary Videos...
Hello MP I have just run into a problem where no video is able to play in MP. The only thing i have done is to update my radeon...
Replies
14
Views
5K
LAV in MP cannot use Default DirectSound device as renderer. LAV in wmp and MP-HC use LAV and Default DirectSound device as renderer without any problem. i'll post later today graphstudio picture
LAV in MP cannot use Default DirectSound device as renderer. LAV in wmp and MP-HC use LAV and Default DirectSound device as...
Hi guys, my current configuration is: MP: 1.14 PR (updated from 1.13 today to see if this problem is fixed in latest version) LAV...
Replies
4
Views
4K
Good to hear that! The problem with the old version was, that the script was always checking, if drive "D:\" is ready (i changed it to drive D for debugging and forgot about it :whistle:). So basically the old script was never working like it was supposed to, it was just coincidence that it worked sometimes :D Now the right drive...
Good to hear that! The problem with the old version was, that the script was always checking, if drive "D:\" is ready (i changed it...
Update 01: After reinstalling my HTPC i realized, that there was a problem with the script. Instead of checking the drive passed by...
Replies
16
Views
7K
Hi Took a while but finally I have good new. The problem is not MediaPortal stream or computer based. After sorrow research on the internet I found out that my dish LNB combination was not good. I had a DUO LNB suited for a 60 cm dish, and I have an 80 cm dish. Just replace the LNB for a correct one an now no shuttering occurs...
Hi Took a while but finally I have good new. The problem is not MediaPortal stream or computer based. After sorrow research on the...
Hi I'm Looking for some help finding a solution agains shuttering of live TV HD content. I'm using Mediaportal quite long allready...
Replies
9
Views
2K
Hello, I have some music coded with opus. The files are tagged with Tagscanner and Foobar can read the tags without any problems. Playback in MP also works, but not tags are displayed in MP. For all other kind of music files the tags are displayed well. Can anybody confirm this behavier? Best regards Memorix My system: MP1.12...
Hello, I have some music coded with opus. The files are tagged with Tagscanner and Foobar can read the tags without any problems...
Hello, I have some music coded with opus. The files are tagged with Tagscanner and Foobar can read the tags without any problems...
Replies
0
Views
945
Switch from lav to ffdshow worked to fix it thanks for the help.
Switch from lav to ffdshow worked to fix it thanks for the help.
I get no sound olny in mediaportal. If I open the file with windows it works and uses the same codecs
Replies
4
Views
1K
@luci5r Pleased to hear you got it all working:) and many thanks for all the info. I uninstalled TMT6 earlier this week and yes, no more BSODs(y). I still have AnyDVD installed but got rid of VCD in favour of the "native" .iso handler in MP and Win 10. I am currently using the MP BD player for Bluray which is OK:unsure: but only...
@luci5r Pleased to hear you got it all working:) and many thanks for all the info. I uninstalled TMT6 earlier this week and yes...
I'm on MediaPortal 1.13. Recently upgraded Windows 8.1 Pro x64 to Windows 10 Pro x64. Prior to this upgrade, and for years now, I...
Replies
15
Views
11K
I meant in terms of licensing... but yes, you're right - it's not open source. I tend to agree with hwahrmann's comment in the linked thread (lot of effort to change - is it worth investing that effort etc.).
I meant in terms of licensing... but yes, you're right - it's not open source. I tend to agree with hwahrmann's comment in the...
Hello, I would like to ask you for support - how to use AC3 filter for playing of Music files. The reason for AC3 filter is to...
Replies
18
Views
8K
Just to let you know, I have just installed an Intel driver update and the refresh rate change is now working perfectly.
Just to let you know, I have just installed an Intel driver update and the refresh rate change is now working perfectly.
I am a relatively new MediaPortal user. I was forced to change when Windows Media Center was left out of Windows 10 and I...
Replies
15
Views
5K
You're right g_Player.Volume seems not to be called at all, when chjanging the volume
You're right g_Player.Volume seems not to be called at all, when chjanging the volume
I am having an issue where the actual volume doesn't change when I adjust the volume in Media Portal. I assume this is because...
Replies
11
Views
4K
Thanks for the suggestions. I think I will either have winamp start at startup or live with the one time split second winamp pop up.
Thanks for the suggestions. I think I will either have winamp start at startup or live with the one time split second winamp pop up.
Hello there. I have winamp configured as my audio player and I am having this issue. Whenever I start a song Winamp opens in front...
Replies
5
Views
1K
MP1 MP2 GPU decoding DE
Hello. I am trying to figure out what I need to do to get smooth 4k playback. When I try to play back 4k video, my cpu is going to 100% and causing the video to stutter. I can play the video back in MPC-HC and it will play reasonably smooth, however the cpu runs at 95% - 100% with the gpu running at 25% - 30%. If I play the same video...
Hello. I am trying to figure out what I need to do to get smooth 4k playback. When I try to play back 4k video, my cpu is going to...
Hello. I am trying to figure out what I need to do to get smooth 4k playback. When I try to play back 4k video, my cpu is going to...
Replies
0
Views
1K
Thanks a lot for the hint and the extensive description. Deactivating that little bastard did the trick. -> Solved!
Thanks a lot for the hint and the extensive description. Deactivating that little bastard did the trick. -> Solved!
Hi there, after i replaced my old Panasonic SA-XR55 with a new Onkyo for my HTPC, i decided to use the Panasonic for my Gaming PC...
Replies
9
Views
5K
The M$ Win10 Update KB3116908 fixed the missing Bitstreaming for me!
The M$ Win10 Update KB3116908 fixed the missing Bitstreaming for me!
Hi unfortunately after the th2 update bitstreaming does not work anymore. Re-installing lav-decoders did not help. Any hints...
Replies
2
Views
1K
Thank you for reporting your solution. :)
Thank you for reporting your solution. :)
Dear community, I used mediaportal 1.12.0 for several weeks with Windows 10 upgrade from Windows 8.1 without problems. Client and...
Replies
8
Views
4K
Hello :) First, your MovingPictures database appears to be corrupt: Please fix that according to the instructions here: http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/Troubleshooting/Repair_SQLite_Database Second, your video codec preferences appear to be unset: This is a problem because when MP tries to fall back...
Hello :) First, your MovingPictures database appears to be corrupt: Please fix that according to the instructions here...
I´m always getting a error " Unable to play... video codec: AVC Audio codec: AAC LC" I think this is not related to MP itself...
Replies
1
Views
2K
Fair, I only mentioned it because the wiki pages told me everything I needed except that tidbit. I would probably put something at the top of the pages linked below, something along the lines of: Although MediaPortal config is applied to all users, the LAV Audio Configuration is set for only the current user. If you use a...
Fair, I only mentioned it because the wiki pages told me everything I needed except that tidbit. I would probably put something at...
Hi all, I'm fairly new to MediaPortal so am just getting my head around it. I used Win MediaCentre for years, not brilliant but it...
Replies
6
Views
4K
Just got to know that probably the RGB32 option in LAV the Nvidia video color space option has the same affect as i already recognized too. Nvidia video color space seems to affect the way EVR renders/handles color space. If you choose limited for this option EVR renders with 16-235. Otherwise it used 0-255 or if turned of it uses...
Just got to know that probably the RGB32 option in LAV the Nvidia video color space option has the same affect as i already...
Hi all, somehow i lost my account and needed to open a new one... I have some questions regarding the renderer MP is using...
Replies
42
Views
8K
MP1 MP2 No Audio / Static DE
I built a new client and started having this issue. quick fix was to turn the HDMI TV off and back on... hiss gone Figured out the order of boot / power on also fixed mine
I built a new client and started having this issue. quick fix was to turn the HDMI TV off and back on... hiss gone Figured out the...
Hi I'm a WMC refugee and have come across MP and want to test it before I commit to windows 10. I've set it up and when I play...
Replies
2
Views
934
MP1 MP2 MP4 codec ? DE
Try installing LAV filters - http://forum.doom9.org/showthread.php?t=156191
Try installing LAV filters - http://forum.doom9.org/showthread.php?t=156191
OK, its been awhile (again) I'm STILL running 1.0.0.0 recently got some mp4 files from "a friend" whats it gonna take to play...
Replies
1
Views
1K
FWIW, figured I'd post my status with this. I *think* the issue is resolved, but not how I had expected. Short story is I had been trying to keep my display at 23.976/24 for movies to match the media sources. The CPU supports this, and every time I looked at MP, MPAR, ReClock or MPC stats and performance. Media appeared to render...
FWIW, figured I'd post my status with this. I *think* the issue is resolved, but not how I had expected. Short story is I had been...
Hoping for some troubleshooting guidance here, as I've been at it with really no change for awhile now. First some background...
Replies
4
Views
2K
I received a newsletter today: there is again a promotion until 7.12.
I received a newsletter today: there is again a promotion until 7.12.
What is the solution to play BluRay with MediaPortal ?
Replies
7
Views
2K
Thanks to all for your comments :) To clarify a couple of points, I had this exact same issue before I moved house and I used to have a sky subscription and this was connected to the same satellite source. BBC1HD worked perfectly. so I'm pretty sure that rules out any signal issues. Once the picture freezes I can restart the...
Thanks to all for your comments :) To clarify a couple of points, I had this exact same issue before I moved house and I used to...
I'm hoping someone here can help me. I've been running MP for about a year now and I have had this problem since the outset. When...
Replies
11
Views
3K
If you haven't found out your problem, it is probably because in the music section you've the mp4 as an extension for music, delete that and you should be okay.
If you haven't found out your problem, it is probably because in the music section you've the mp4 as an extension for music, delete...
PROBLEM SOLVED Can someone please tell me (if it's possible by just looking at the logs) why I don't get any sound playing the...
Replies
1
Views
1K
How do i install MP Audio Renderer and set em to convert all sound to 5.1? I'm confused, super newbie in this kind of thing. I have K-lite Codec installed with LAV as my default, since LAV unable to made all sound to 5.1 i hear that MP Audio Renderer can, but idk how. Thanks for the help
How do i install MP Audio Renderer and set em to convert all sound to 5.1? I'm confused, super newbie in this kind of thing. I...
How do i install MP Audio Renderer and set em to convert all sound to 5.1? I'm confused, super newbie in this kind of thing. I...
Replies
0
Views
1K
*BUMP*
*BUMP*
I have powerdvd ultra 14 and enabled 3d playback through Nvidia drivers. Do I need to rip blurays as iso files or can I remux the...
Replies
1
Views
2K
Ahhh, I see. Yeah, that would do it. :) These things happen. Hopefully in the process of fixing this you learnt a bit more about MP than you otherwise would have. Happy to help any time. Don't hesitate to ask if you have questions. The community can save you a lot of time. ;)
Ahhh, I see. Yeah, that would do it. :) These things happen. Hopefully in the process of fixing this you learnt a bit more about...
newbie trying to setup mediaportal. followed guides and setup test folder of about 20 videos. all videos been playing fine with WMC...
Replies
7
Views
3K
Top Bottom