Live TV is a special case, because the data is arriving in real time. By all means try using MPAR for live TV - I'm just warning you that it may cause problems like audio stuttering and dropouts if you are unlucky (it's system dependant).
Live TV is a special case, because the data is arriving in real time. By all means try using MPAR for live TV - I'm just warning...
I've built my Mediaportal system and I'm trying out some of the features. I used this guide to setup my Video & Audio render...
I migrated from Windows Media Center four months ago, and installed MediaPortal 1.9.0 pre. As far as I remember, the default configuration supports the playback of DVR-MS files, without having to make any changes. WTV files are supported too. Certainly I have no problems replaying the DVR-MS files in my recordings library.
I note...
I migrated from Windows Media Center four months ago, and installed MediaPortal 1.9.0 pre. As far as I remember, the default...
Hi folks, I've been using MP for over a year now (replaced WMC on Win7). I'm just setting up new hardware/fresh install and would...
Hi y'all !
I just want to share my setup to get (in my opinion :p) perfect audio...
It was a struggle... Also to get TrueHD audio working on my non TrueHD receiver... My receiver only supports Dolby Digital DTS 5.1... And no TrueHD Audio or DTS-HD.
Well i've managed to process all audio from movies... (2.0 Stereo, 5.1 DD or 5.1 DTS...
Hi y'all !
I just want to share my setup to get (in my opinion :p) perfect audio...
It was a struggle... Also to get TrueHD audio...
Hi y'all !
I just want to share my setup to get (in my opinion :p) perfect audio...
It was a struggle... Also to get TrueHD audio...
ok guys.. i think I have sound again..
i unchecked every formats, leaving only DTS.-HD and it seems like there is sound now
ok guys.. i think I have sound again..
i unchecked every formats, leaving only DTS.-HD and it seems like there is sound now
System: Mini NUC intel media dedicated computer, audio and video built in motherboard.
I use HDMI for sound and video as always...
I have Mediaportal Audio Renderer (MPAR) & Dynamic Refresh Rate (DRR) working great with LAV codecs. I have setup my system using this guide: https://forum.team-mediaportal.com/threads/guide-perfect-playback-display-calibration.119610/
Audio/Video sync is fine when I start playing a video in 24hz/50hz/60hz using DRR changer.
However...
I have Mediaportal Audio Renderer (MPAR) & Dynamic Refresh Rate (DRR) working great with LAV codecs. I have setup my system using...
I have Mediaportal Audio Renderer (MPAR) & Dynamic Refresh Rate (DRR) working great with LAV codecs. I have setup my system using...
using powerdvd codecs now works perfectly.
using powerdvd codecs now works perfectly.
Hey all,
I have tried all types of codecs for my mepo box(all codecs are latest editions from homepages) SAF, MPC and ffdshow...
PCM is decoded/decompressed 'raw' digitised audio, so it's actually the best quality format (along with lossless compressed formats like FLAC).
(PCM = Pulse Code Modulation, the technical name for the standard method of digitising audio).
PCM is decoded/decompressed 'raw' digitised audio, so it's actually the best quality format (along with lossless compressed formats...
Hi guys
I just got a new AV receiver so i want to configure things to get things to the Receiver as easily as possible
I am now...
Here is the log.
You guys have done a great job developing these programs. Must have taken a lot out of your sleeping time.
Thanks for the help.
Here is the log.
You guys have done a great job developing these programs. Must have taken a lot out of your sleeping time...
I have a Kworld Analogue TV Capture card on a Windows 7, 64bit PC.
In the General section of MP it states that the Kworld Audio...
First you put an m3u (playlist) file containing the stream URLs in the TV Server IPTV tuning parameters folder (c:\ProgramData\Team MediaPortal\MediaPortal TV Server\TuningParameters\dvbip). m3u files can be opened in any text editor, so you can open one of the existing files to see the format etc.
Once you have the m3u file with the...
First you put an m3u (playlist) file containing the stream URLs in the TV Server IPTV tuning parameters folder (c:\ProgramData\Team...
Hi all,
I havn't found any up-to-date thead for my problem or rather wish. I would like to play a rtsp link or a xspf link of VLC...
You need to help us a little bit here ;)
Start MP with the WatchDog (option 1), reproduce your problem and attach the logs here.
You need to help us a little bit here ;)
Start MP with the WatchDog (option 1), reproduce your problem and attach the logs here.
Hi
Sorry I dont have any log files.
But there is nothing wrong, only settings must be wrong !
I have normally used my computer on...
never heard of FFDShow?
never heard of FFDShow?
I've setup LAV for upmixing however nothing comes out of the rear speakers.
I've enabled upmixing in the music plugin, this works...
- Poll
Did some testing again and frankly speaking, I hardly hear any difference between DSD vs PCM. Must have been the receiver's listening modes interfering back then. Or smoked too much. I shouldn't be able to hear it at 42, but DSD seems slightly more crisp/dynamic but that's it. I hooked up a pair of JMlab speakers for this purpose, in...
Did some testing again and frankly speaking, I hardly hear any difference between DSD vs PCM. Must have been the receiver's...
The purpose of this thread is to gain interest in DSD/DSF audio formats and find out if playability can be implemented in future...
Hi All,
I've tried to do a search to see if I can find an answer on why I have this little issue when it comes to audio in some files.
The trouble is the audio is encoded as 2 channel stereo AC3. It's sent to my home amp as AC3 via SPDIF as it thinks it's dolby digital. Alas, when it gets there nothing can be heard.
If I change...
Hi All,
I've tried to do a search to see if I can find an answer on why I have this little issue when it comes to audio in some...
Hi All,
I've tried to do a search to see if I can find an answer on why I have this little issue when it comes to audio in some...
Hi guys
Thanks for this thread. I've now managed to "correct" my AV audio delay problem as well using the slider.
Is there anyway of having the selection permanently held in the database, so I find the position and it gets saved for next time I play the movie.
That would be a great feature
Cheers
Hi guys
Thanks for this thread. I've now managed to "correct" my AV audio delay problem as well using the slider.
Is there...
Okay here goes...
I have A/V sync somewhat off when playing some HD videofiles. Everything is fine when playing SD files or...
Well, didn't get any responses but eventually I figured out that my problem was the same as the one in this post https://forum.team-mediaportal.com/threads/no-sound-for-most-files.125442/
Used the same solution and everything is all good with sound now. Playing perfectly using LAV filters and direct sound.
Well, didn't get any responses but eventually I figured out that my problem was the same as the one in this post...
I'm having problems getting audio to work properly for live TV. I installed MP a week ago and I love it but this is doing my head...
Right, the 750 is the USB card. I thought it supported FM radio when I got it some time ago, but the website do not say anything about FM radio. I trusted this over the last few days - but it seems I shouldn't have. I was able to dig out the manual - the manual for the device itself confirms the 750 USB supports FM radio, while the...
Right, the 750 is the USB card. I thought it supported FM radio when I got it some time ago, but the website do not say anything...
Hello!
I have the latest version of MediaPortal, 1.7.1, configured as TV-server without front end. It works just fine for TV, and...
Not sure if this is a MediaPortal issue or a Moving Pictures issue. Doing a clean setup which I haven't done in a long time. I'm using TMT as an external player. Setting up for Bluray playback is a snap but can't get DVDs to work properly. I know in the past I had to set this up in either the DVD portion or the Videos portion in the...
Not sure if this is a MediaPortal issue or a Moving Pictures issue. Doing a clean setup which I haven't done in a long time. I'm...
Not sure if this is a MediaPortal issue or a Moving Pictures issue. Doing a clean setup which I haven't done in a long time. I'm...
MP Audio Render won't work with WinXP.
MP Audio Render won't work with WinXP.
I've recently installed MP 1.4.0 on an old workstation I'm attempting to turn in to a HTPC. I'm running XP Pro SP2 (Intel Pentium D...
wow... Thanx!
This solved my problem also! why did MePo get muted in Mixer?
This happened after a catalyst driver update, including updating HDMI Audio driver (my default audio device).
wow... Thanx!
This solved my problem also! why did MePo get muted in Mixer?
This happened after a catalyst driver update...
Hi guys,
Happy MP user for several years now, was on 1.6 when all of a sudden (overnight??) sound stops working. It concerns Music...
Hi, it will use BASS Engine or Wasapi :)
On my HTPC, i have set 2.0 in windows but when audio track is 5.1 / 7.1 (7.1 is my setting on MPAR) the AMP change to correct mode.
That mean when i have 2.0 source (stereo) i can use my Dolby Prologic mode from my AVR :)
Hi, it will use BASS Engine or Wasapi :)
On my HTPC, i have set 2.0 in windows but when audio track is 5.1 / 7.1 (7.1 is my setting...
Hello everyone,
I have several .mkv files that don't play audio through media portal. VLC plays them on my set up. I can play...
Hello, i've been running mediaportal for several years now playing DVDs and i'm getting ready to upgrade to a Bluray/3d Bluray setup with Mediaportal and i have a few questions. I've been trying to read the forums/etc and i think i keep getting more confused the more I read :P. Any input would be greatly appreciated, my questions...
Hello, i've been running mediaportal for several years now playing DVDs and i'm getting ready to upgrade to a Bluray/3d Bluray...
Hello, i've been running mediaportal for several years now playing DVDs and i'm getting ready to upgrade to a Bluray/3d Bluray...
I'm using MPAR for audio render and have it configured according the 'perfrect playback guide' (https://forum.team-mediaportal.com/threads/guide-perfect-playback-display-calibration.119610/#post-1001745). But i have two speakers connected at bi-amp and have a subwoofer.
In my opinion it is a 2.1 configuration, but i only can select...
I'm using MPAR for audio render and have it configured according the 'perfrect playback guide'...
I'm using MPAR for audio render and have it configured according the 'perfrect playback guide'...
Thanks for the hints!
After one day of full immersion in different solutions, the issue has been solved thanks to the installation of SAF (http://hobring.esero.net/saf/binary/)! :cool:
No necessity to install PowerDVD to use its codecs. I'm going to change the title of the thread removing [BUG?]...in fact nothing related to...
Thanks for the hints!
After one day of full immersion in different solutions, the issue has been solved thanks to the installation...
Hello All,
To watch live TV I have set PowerDVD codec for both standard and HD transmissions. With a big surprise, using...
Solution:
Uncheck "Exclusive Mode" in iMon Manager under Imon Utilities/Application Launcher
Solution:
Uncheck "Exclusive Mode" in iMon Manager under Imon Utilities/Application Launcher
Hi
I am using a HTPC case with the Soundgraph iMon remote and software.
It all works good in Mediaportal. However I want to play...
I can't find anything about this error. Should I report it?
I can't find anything about this error. Should I report it?
I have just installed Media Portal to replace my WMC7 HTPC.
I just can't get the DVD to resume playing.
I have tried to install...
I believe you, and in any event, Thanks. Is it possible that whoever wrote the SD plugin, knowing what you said above about TV server supporting 3 of each type, mapped SPDIF#3 in the dropdown box to SPDIF#2 on the Colossus? When I went back an tried again, both #2 and #3 worked when I set them on a channel.
Anyway, thanks again...
I believe you, and in any event, Thanks. Is it possible that whoever wrote the SD plugin, knowing what you said above about TV...
I have just installed MP. I have setup my Colossus and video is working fine with most codecs. TV Audio however is not. I have...
I rolled back to 1.5 and my system is working properly again. Not sure what the issue is in 1.6 but at this point I will be very selective if I decide to upgrade again.
I rolled back to 1.5 and my system is working properly again. Not sure what the issue is in 1.6 but at this point I will be very...
I have been using Media Portal for several years now but with latest update to 1.6 I am getting random issues with audio output no...
That's ok! I can live with your explanation! :D
That's ok! I can live with your explanation! :D
Hi All,
I'm actually using PowerDVD codecs for liveTV/TV recordings and I have one question about the related settings in...
When I play a 3D mkv using the over-under format in my downstairs MediaPortal PC. When the video plays, you can see a vertical line down the middle, due to the video being split up slightly. In other words, if you turn off the 3D you will see the video gets split into 4 corners. It's only a few pixels displaced up and down.
This...
When I play a 3D mkv using the over-under format in my downstairs MediaPortal PC. When the video plays, you can see a vertical line...
When I play a 3D mkv using the over-under format in my downstairs MediaPortal PC. When the video plays, you can see a vertical line...
Hello all,
does anyone know how I can configure MediaPortal 1.6 so that when I insert a Blu-ray my external player PowerDVD is started while when inserting a DVD the MediaPortal internal player is used?
Thanks,
Hella
Hello all,
does anyone know how I can configure MediaPortal 1.6 so that when I insert a Blu-ray my external player PowerDVD is...
Hello all,
does anyone know how I can configure MediaPortal 1.6 so that when I insert a Blu-ray my external player PowerDVD is...