I'm using ARGUS-TV and MediaPortal, and my cable provider is YouSee (Denmark).
All the channels seems to work perfect - even th HD ones - EXECPT TV3+ HD. After a few minutes I begin to have severe stutting in picture and Audio.
This is the ONLY channel where I experience these problems...
My question is: Does anyone else have similar...
I'm using ARGUS-TV and MediaPortal, and my cable provider is YouSee (Denmark).
All the channels seems to work perfect - even th HD...
I'm using ARGUS-TV and MediaPortal, and my cable provider is YouSee (Denmark).
All the channels seems to work perfect - even th HD...
Problem solved - muppet network setup. I had configured a static IP address on the client PC with my router as the DNS server rather than my actual server. As I'm running in a domain, the server then assumed that the client was outside the domain, and blocked some (but not all) ports.
Problem solved - muppet network setup. I had configured a static IP address on the client PC with my router as the DNS server...
One of my TV clients has started to play up, and not play live or recorded TV - instead of playing, I get "Unable to play:" and a...
Whenever I try to play a file with DTS Audio using LAV I get a terrible shtutering output. Playing the same file in Graphstudio works just fine. therfore I wiuld assume its something inside MePo - but what? The only filter working is the MS-DTV-DVD decoder which on the other Hand creates general Output Error (File can not be played...
Whenever I try to play a file with DTS Audio using LAV I get a terrible shtutering output. Playing the same file in Graphstudio...
Whenever I try to play a file with DTS Audio using LAV I get a terrible shtutering output. Playing the same file in Graphstudio...
Greetings!
Are there any possibilities to move blu-ray sub titles into the video frame (subtitle shift)?
I'm using MP 1.3 and Moving Pictures. Offcourse thers no problem with regular videofiles.
I though maybe external players supported this, but powerDVD only has that option with DVD's.
I have a 16:9 projection screen with manuel...
Greetings!
Are there any possibilities to move blu-ray sub titles into the video frame (subtitle shift)?
I'm using MP 1.3 and...
Greetings!
Are there any possibilities to move blu-ray sub titles into the video frame (subtitle shift)?
I'm using MP 1.3 and...
What driver version shows up in nvidia control panel, if later than 276.xx you may find that could be the culprit, even though logs showing ffdshow video filter not found.
Also reinstall any codecs after changing any video or audio driver as this may affect associations influenced by the driver within the registry.
If you think it...
What driver version shows up in nvidia control panel, if later than 276.xx you may find that could be the culprit, even though logs...
MediaPortal Version: 1.2.3
MediaPortal Skin: StreamedMP
Windows Version: Win7 SP1
CPU Type: Intel Core 2 Duo P7550 2,26GHz
HDD...
I have an IvyBridge system with HD2500 graphics and do not see any obvious problems using the MePo LAV filters. I've tried both QuickSync and DXVA2 both seem to work. Maybe I'm not looking closely enough to notice the problems you are seeing.
My setup has
VGA = LCD monitor, I just use this for "computer" stuff
HDMI = Samsung TV...
I have an IvyBridge system with HD2500 graphics and do not see any obvious problems using the MePo LAV filters. I've tried both...
Hi,
I recently changed my HTPC configuration from AMD 785G with integrated ATI HD 4200 graphics to Intel core i5-3570k with...
Hey, sorry to resurrect an old thread, but I'm just wondering if this problem has resurfaced recently?
I'm running 1.6.0 with LAV 0.59.1 (from the Extension Installer) and also tried the latest LAV separately with no change.
Despite having LAV Video selected as every codec for every option in config, live TV is picking Microsoft...
Hey, sorry to resurrect an old thread, but I'm just wondering if this problem has resurfaced recently?
I'm running 1.6.0 with LAV...
If you are using the recent versions of LAV filters (0.51.3 and later) with MP 1.2.3, you may find that MP will not actually use...
Hi
I'm using Blu-ray/HD DVD plugin for Arcsoft player that i use only to watch blu-ray's. It works fine, when i press play it launches total media theater. Then i use the internal player to watch DVD's witch also works fine. The problem is when i first open something with the internal player an then try to open a blu-ray, some times...
Hi
I'm using Blu-ray/HD DVD plugin for Arcsoft player that i use only to watch blu-ray's. It works fine, when i press play it...
Hi
I'm using Blu-ray/HD DVD plugin for Arcsoft player that i use only to watch blu-ray's. It works fine, when i press play it...
I have the same issue as you, with Yamaha rx-v765 and LG PK760 TV. HDMI out from an i7 3770k PC.
When i set the Audio out to TV or TV+AMP i got only Dolby Digital, but when i set it to AMP i got Dolby Digital, DTS Audio and Dolby Digital Plus.
Only if i turn the TV off then it shows TrueHD and DTS-MA.
I can't solve this problem.
I have the same issue as you, with Yamaha rx-v765 and LG PK760 TV. HDMI out from an i7 3770k PC.
When i set the Audio out to TV or...
Ok, first my configuration...
HTPC
MB: ASUS P8Z68-M PRO
CPU: Intel Core i3-2125
GPU: Intel HD Graphics 3000 (Sandy Bridge GT2)...
Hi
I use SAF the lastest lock version and everything looks fine.
My CPU does not work so hard and I can easy look at my 1080p MKV file.
The problem is that when I like to use Fast Forward I have problem.
The pictures freeze and does not show and most of the time make MP crash.
When I use MPC-HC I have no problem to click on the...
Hi
I use SAF the lastest lock version and everything looks fine.
My CPU does not work so hard and I can easy look at my 1080p MKV...
Hi
I use SAF the lastest lock version and everything looks fine.
My CPU does not work so hard and I can easy look at my 1080p MKV...
Yes, had installed everything as it should.
I have a beamer installed on my AV receiver and the device was switched off. So I worked with my touch creen monitor.
As you mentioned the audio drivers I switched on the breamer and checked if the HDMI output was set as standart audio output which was not the case, I think.
Now everything...
Yes, had installed everything as it should.
I have a beamer installed on my AV receiver and the device was switched off. So I...
Hello there!
I encounter serious problems installing MP 1.2.3 on my new computer.
A few months ago everything worked just fine on...
Hi all,
I know that some fantastic work has been done around MP 1.3 with Blu-ray menus etc.
However, I am a big fan of DVDFab and use a number of their products which always seem really cutting edge e.g. 3D Blu Ray ripper etc.
They have released a Blu Ray media player with full navigation that looks to be very good and...
Hi all,
I know that some fantastic work has been done around MP 1.3 with Blu-ray menus etc.
However, I am a big fan of DVDFab...
Hi all,
I know that some fantastic work has been done around MP 1.3 with Blu-ray menus etc.
However, I am a big fan of DVDFab...
If the RealTek is windows "default" for audio, then just leave the setting at "default directsound device".
You do not gain anything by changing this ;)
If the RealTek is windows "default" for audio, then just leave the setting at "default directsound device".
You do not gain...
Hi all,
in the MP client config, the HDMI device appears twice:
"DirectShow:Realtek HDMI"
and
"Realtek HDMI"
Now which to...
Sorry, back again, on the the attached image which is the correct settings for my setup, as per initial post?
thanksalso, I am having trouble understanding the renderers. see attached image, the only on which works on the LG is the mediaportal renderer except thast if I set it to LG-TV(0) Nvidia High Definirtion then it will produce...
Sorry, back again, on the the attached image which is the correct settings for my setup, as per initial post?
thanksalso, I am...
Please can someone advise me on the best audio setup for my particular installation.
Computer > HDMI > TV > Optical Link > Dolby...
It doesn't like the aac audio on NZ freeview. If you deselect any aac channels leaving only ac3 it should work.
If you want to trim the video you can try Avidemux 2.6 (use 32 bit version as it doesn't crash on exit), it is free and open source. Select ts or mkv as output format and deselect the aac tracks in the audio menu. Copying...
It doesn't like the aac audio on NZ freeview. If you deselect any aac channels leaving only ac3 it should work.
If you want to...
Wanting to get a few files off the HDD and give others to a friend. Here in New Zealand, we've got Mpeg-4 (h264 and AC3/AAC)...
No, only SAF 6.14 WIP. Now that I've figured out that I have to use ReClock anyway to get proper sound from 5.1 AAC files, I think I'm gonna drop SAF again and go back to LAFV with ReClock. I have been thinking about start using MePo Renderer for a while, but IIRC, it doesn't work correctly in WinXP. I have been putting of the move to...
No, only SAF 6.14 WIP. Now that I've figured out that I have to use ReClock anyway to get proper sound from 5.1 AAC files, I think...
I fairly recently rebuilt my HTPC with Win7 x64 as I got a SSD drive.
I have some movies with AAC 5.1 sound that when using XP...
Great. :)
It is the responsibility of tuner vendors to provide compatible software encoders with their products. For example, Hauppauge provides SoftMCE/SoftPVR, TerraTec provides TerraTec Home Cinema (which includes compatible encoders) etc. Also, the encoders are the property of their respective companies (ATI/AMD, CyberLink...
Great. :)
It is the responsibility of tuner vendors to provide compatible software encoders with their products. For example...
Hi everyone,
I'm new here and I wanted to try Mediaportal because I'm not really satisfied with Windows MCE, so I'll come...
This is a option if I will have much time in the future. I must make all the wires longer to connect outside the board to the onboardplugs.
Now the PC is running well with the divX codec ...
This is a option if I will have much time in the future. I must make all the wires longer to connect outside the board to the...
Hello,
I have the problem that MePo don't plays recordet HD satellite recordings.
See also...
I cannot figure out how to configure audio codecs for music files.
Codecs are selectable and configurable for TV and video, but no similar setup exist for Music.
Any hints or solutions ?
I cannot figure out how to configure audio codecs for music files.
Codecs are selectable and configurable for TV and video, but no...
I cannot figure out how to configure audio codecs for music files.
Codecs are selectable and configurable for TV and video, but no...
I just Shark007 on all systems - only sucks for upgrading as you need to do an uninstall/reinstall. And there I use what works best for me (in my case: MPC/ffdshow).
I just Shark007 on all systems - only sucks for upgrading as you need to do an uninstall/reinstall. And there I use what works best...
I was thinking that MP would note what the recommend codecs or packs would be for a fresh installation... but unfortunately I could...
Ahhh MM,
Thanks bro... I did and it seems to be working much better!!! Thank you
as for starting my own thread i did not want to clutter the place up
but I will next time.... By the Way you did a beautiful Job On Mediaportal
1.3.. What a rewrite Revamp... Loving it and Thank you!!!!
Mondo
Ahhh MM,
Thanks bro... I did and it seems to be working much better!!! Thank you
as for starting my own thread i did not want to...
Before I continue I must say I already know that Analogue TV signal requires some sort of third party MPEG encoder
I scanned for...