WebEPG (14 Viewers)
everything related to WebEPG in here
TV Movie - Clickfinder (1 Viewer)
everything about the TV Movie - Clickfinder plugin
xmlTV (5 Viewers)
everything related to xmlTV in here
So most probably it was your ip blacklisted and cleared again. Some websites are blocking for hours and some are for days. Ok then, enjoy :)
So most probably it was your ip blacklisted and cleared again. Some websites are blocking for hours and some are for days. Ok then...
Hi everyone. My name is Kivanc and I am the developer of Tempest EPG Generator
which is a single php file xmltv formatted epg...
I live in the UK and have never used an internet EPG with MP. Hence I have never used "Schedules Direct", so the following is all second-hand or third-hand knowledge...
There is a "TV Server" plugin for "Schedules Direct". Is this the plugin you installed, or are you referring to something provided by "Schedules Direct"?
The...
I live in the UK and have never used an internet EPG with MP. Hence I have never used "Schedules Direct", so the following is all...
I live in the US and get my TV from over the air ATSC. Originally I believe I got my guide data from WebEPG, but that stopped...
Hi. I tried what you said in your last reply and finally got the EPG Grabber to work and get all the data for the channels. Thanks for your help.
Hi. I tried what you said in your last reply and finally got the EPG Grabber to work and get all the data for the channels. Thanks...
HI. I am having big problems with this. I went through the instructions online a couple of weeks ago and I seem to get the full TV...
Thanks for the info. All clear except whether Power Scheduler will actually run SD plugin at specified times. I'll look into it,
Meantime, I got mc2xml working, and that can be run daily as a scheduled task. (that;s what I used to do - I think)
Meantime again, it appears my zap2xxml from tvguide.com started working again - temp...
Thanks for the info. All clear except whether Power Scheduler will actually run SD plugin at specified times. I'll look into it...
Reason for questions: I've been using zap2xml to get data from tvguide.com and write tvguide.xml for xmltv for years - but it seems...
MP1
MP2
Epg does not open at the last watched channel + epg grab stuck if not manually deleted first
DE
Having used MP1 since 15 years, these epg related problems occuring after a fresh install stumble me.
Needed to change a system hdd and decided it was time for a clean install anyway. Other hardware (C2D, 8 Gb ram, no tv cards - IP only) unchanged. Was running an earlier Win10 version with MP 1.24 which had been updated for years...
Having used MP1 since 15 years, these epg related problems occuring after a fresh install stumble me.
Needed to change a system...
Having used MP1 since 15 years, these epg related problems occuring after a fresh install stumble me.
Needed to change a system...
After investigating a bit, I can't think of any reason that the channel would be null
I do see some other patches for this case but I'm a bit hesitant to just copy and paste this (MediaPortal/MediaPortal-1) without understanding the underlying cause.
Do you also sometimes have issues with playback by any chance?
Also, do you happen to...
After investigating a bit, I can't think of any reason that the channel would be null
I do see some other patches for this case but...
Since upgrading to v1.27, I find that pressing "Enter" when I have selected a program in the TV Guide often does nothing...
Digiguide looks sweet, but there doesn't seem to be a way of contacting them
I'd be happy to pay for this, does anyone know if they provide an epg xml, that would be usable in MP1 ?
I currently buy an actual magazine for planning my recordings.
But this could actually kill two birds with one stone.
Digiguide looks sweet, but there doesn't seem to be a way of contacting them
I'd be happy to pay for this, does anyone know if they...
Digiguide looks sweet, but there doesn't seem to be a way of contacting them
I'd be happy to pay for this, does anyone know if they...
Hi,
I have prepared shell script to fetch EPG on Ubuntu Machine as follows
#/bin/bash
now=$(date +"%m_%d_%Y")
cd /home/ubuntu/
tv_grab_na_dtv --config-file wward.conf --output /home/ubuntu/xencast/public/epg_$now.xml --days 1
If run above script on Ubuntu command terminal , able to get EPG data.
If you run same script on crontab...
Hi,
I have prepared shell script to fetch EPG on Ubuntu Machine as follows
#/bin/bash
now=$(date +"%m_%d_%Y")
cd /home/ubuntu/...
Hi,
I have prepared shell script to fetch EPG on Ubuntu Machine as follows
#/bin/bash
now=$(date +"%m_%d_%Y")
cd /home/ubuntu/...
Thanks, it's back working tonight :) I hadn't ticked "EPG grabbing whilst idle", so hoping that's all it was.
Thanks, it's back working tonight :) I hadn't ticked "EPG grabbing whilst idle", so hoping that's all it was.
Hi everyone
I'm still wondering if anyone has success getting the OTA EPG data for FreeSAT ?
I've tried all combinations with the...
Thanks CyberSimian, I was afraid my memory was faulty regarding that. On the plus side I played around with powershell last night and got a semi-working solution going.
Thanks CyberSimian, I was afraid my memory was faulty regarding that. On the plus side I played around with powershell last night...
I'm using XMLTV with Schedules Direct for my epg data. I am almost positive that in the past, Movie descriptions also included the...
I think I will now beg to differ! The functionality you describe (and presumably admired) within WMC is almost exactly that which I tried to describe for TVWishlist, i.e. partial matching and keyword searching.(amongst other things).
May I suggest that you read the documentation page for TVWishlist found here.
Again, I make the...
I think I will now beg to differ! The functionality you describe (and presumably admired) within WMC is almost exactly that which...
I was having so many problems with MP1 that i elected to reinstall windows 10. I was able to get the tv epgs fine before but with...
Hi
I think the last time I set up TV server I had the same issue and I had to add Freesat Info manually. These were the parameters I used:
Transponder
115
Frequency
11.42500 GHz / 11425 MHz
Polarity
Horizontal
Mod
DVB-S, QPSK
Symbol
27500
FEC
2/3
Network ID
59
Transport ID
2315
Freesat Info...
Hi
I think the last time I set up TV server I had the same issue and I had to add Freesat Info manually. These were the parameters...
Hi Everyone, hope you are all well
I am setting up MediaPortal1 in Hastings where there is DVB-T only
I had absolutely no success...
MP1
MP2
Guide mapping schedules direct, tvguide, epg buddy How to get correct entry to the correct channel?
DE
I have tested TvGuide via EPG Buddy and Schedules direct XMLTV. I successfully download a large listing of channels.
For example:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE tv SYSTEM "xmltv.dtd">
<tv source-info-name="Schedules Direct" generator-info-name="mc2xml" generator-info-url="mailto:mc2xml@gmail.com">
<channel...
I have tested TvGuide via EPG Buddy and Schedules direct XMLTV. I successfully download a large listing of channels.
For example...
I have tested TvGuide via EPG Buddy and Schedules direct XMLTV. I successfully download a large listing of channels.
For example...
Hi Percy, are you using Freesat and getting the EPG? I'm trying to get my MP1 EPG on Freesat but cannot obtain the Freesat.Info channel so wondering if you had success. Regards TW
Hi Percy, are you using Freesat and getting the EPG? I'm trying to get my MP1 EPG on Freesat but cannot obtain the Freesat.Info...
To give full details I am transferring from WMC to MP1.
I am currently using DVBlink to merge freeview and fressat channels and am...
Thanks very much for the detailed reply Jasmeet_181 - I will try your suggestions
Thanks very much for the detailed reply Jasmeet_181 - I will try your suggestions
Hi - I'm getting my EPG in MP 1.21.0 using EPGCollector to collect New Zealand Freeview MHEG5 data and combine it with IPTV data...
Thanks for that, yes that part seems to be working but it only goes a week ahead. Digiguide goes 14 days ahead, & gives a lot more info
Thanks for that, yes that part seems to be working but it only goes a week ahead. Digiguide goes 14 days ahead, & gives a lot more info
Hello,
I'm sure I'm being dumb. I I use the XMLTV GUI, I use digiguide as my schedule provider. But its stopped working, had been...
Thanks Owlsroost,
I will have a look into the code at some stage, might be a while though! :)
Cheers,
Divxmaster
Thanks Owlsroost,
I will have a look into the code at some stage, might be a while though! :)
Cheers,
Divxmaster
Hi,
I've been using Mediaportal for a very very long time, but have never come across a way to enable soft record padding.
By this...
This should be handled by the powerscheduler. do you have any logs from when that happend? (loglevel should be set to debug, and preferably after a restart of the tvservice)
This should be handled by the powerscheduler. do you have any logs from when that happend? (loglevel should be set to debug, and...
Hi,
Not sure if this is better put in the WEBEPG section (because that's the plugin that is acting up) but over here it might get...
My EPG fix-up is only needed when I know a change has been made to the schedule: e.g. when someone famous dies and all their films are shown. The process I have developed to remove phrases like New: from the description and put the series information from the EPG into the series fields runs every so many minutes (defined by the user)...
My EPG fix-up is only needed when I know a change has been made to the schedule: e.g. when someone famous dies and all their films...
Since yesterday, 2nd February 2019, and today, UK - BBC2 EPG has several programs with 'No information'. I guess this is a UK issue...
Based on the log entry, it's a SchedulesDirect plugin issue.
Sorry, no idea. The source code for the plugin is here - geoffstewart/mp-schedulesdirect - so you could try searching the code for 'is not a valid value for LineupTypes' to get more info on the source of the problem.
You might also want to search the forum for ideas (and...
Based on the log entry, it's a SchedulesDirect plugin issue.
Sorry, no idea. The source code for the plugin is here -...
I am using SchedulesDirect for importing HDHomeRun Premium and OTA EPGs. After restarting the MediaPortal1 service, no EPG data...
Installed it and got it to recognize my channels but having issues getting MP2 to recognize the channels mapped. I wasn't able to work with it too long last night. I'll try again this evening.
Installed it and got it to recognize my channels but having issues getting MP2 to recognize the channels mapped. I wasn't able to...
I've looked all through here and have not seen a thread directly addressing my problem so forgive me if it has been dealt with...
Ok, It seems that EPG-Buddy is the best solution. Season and Episode show as 1.1, 1.2, etc or the air date. The movies now show the air date so I'll consider this as solved. Thanks.
Ok, It seems that EPG-Buddy is the best solution. Season and Episode show as 1.1, 1.2, etc or the air date. The movies now show the...
Hi, I'm using zap2xml and zap2it as my source. The tvguide.xml file contains all of the episode info, date aired, movie date...
I live in San Antonio. WOAI-DT broadcast NBC on 4.1.
WOAI has other frequencies 4.2 Antenna, and 4.3 Charge. I'm using a combination of HDHomeRun tuner and Hauppauge tuners. I can see 4.1 when I watch live TV via the HDHomeRun app.
I'm using MP1 to record and WOAI-DT Schedules Direct is reporting as either 4.2, 4.3 or some other...
I live in San Antonio. WOAI-DT broadcast NBC on 4.1.
WOAI has other frequencies 4.2 Antenna, and 4.3 Charge. I'm using a...
I live in San Antonio. WOAI-DT broadcast NBC on 4.1.
WOAI has other frequencies 4.2 Antenna, and 4.3 Charge. I'm using a...
Or I could just keep using zap2xml -- which works well when that data sources (tvguide.com or zap2it.com) are working right (which isn't always)
Or I could just keep using zap2xml -- which works well when that data sources (tvguide.com or zap2it.com) are working right (which...
Easy to setup, and almost everything works. One problem (so far), a suggestion, and a question.
Trying to use EPG-Buddy in a new...
Just as a note to others who may find this thread useful and I've book marked it as I forget how my EPG is setup. Freesat info no longer works, see this for how to fix it Freesat EPG in UK anyone?
Just as a note to others who may find this thread useful and I've book marked it as I forget how my EPG is setup. Freesat info no...
Hi,
Despite Channel 4 HD withdrawing from Freesat - the broadcast still seems to work but there is very limited EPG (now/next...
I want to emphasize that I only said it was a possibility.
These are the trade-offs of using a custom version.
I want to emphasize that I only said it was a possibility.
These are the trade-offs of using a custom version.
So now the Sky UK EPG grabber won't work due to changes made by Sky, I figured I'd try to use the Freesat EPG instead, which is...
The best solution to this is EPG-Buddy and TV Guide
I have been using it for over a year and have helped others in switching over
EPG-Buddy
The best solution to this is EPG-Buddy and TV Guide
I have been using it for over a year and have helped others in switching over...
The number of days argument doesn't seem to work for me using zap2xml to get tvguide.com data.
(don't know how many days I'm...
Thanks Milhouse. I didn't realize the channels should be named identically to schedules Direct . I renamed some channels and confirmed its working. I have installed MySql workbench, but I haven't figured out how to use it to map the channels if the names don't match. Also, I'm not sure if its pulling extra data from The TVDB, I'll...
Thanks Milhouse. I didn't realize the channels should be named identically to schedules Direct . I renamed some channels and...
I've been rebuilding my HTPC system, and I'm experimenting with different EPG Grabbers for OTA TV in the USA. I have been using...
I just saw this discussed in another thread, but can't find it now -- sorry.
Could someone please point me to the code for the Export button on the xmltv mapping screen?
Can't be much more than --
open file;
while(extract works) {write extract to text file};
Close file;
--- can it?
Maybe I can recall enough to make a separate...
I just saw this discussed in another thread, but can't find it now -- sorry.
Could someone please point me to the code for the...
I just saw this discussed in another thread, but can't find it now -- sorry.
Could someone please point me to the code for the...
If you use zap2xml to get guide data from TVGuide.com, how long have you been doing it? Any problems with TVGuide.com data?
I've been using Schedules Direct via mc2xml for years with only an occasional problem. Wondering if TVGuide via zap2xml will be as reliable.
If you use zap2xml to get guide data from TVGuide.com, how long have you been doing it? Any problems with TVGuide.com data?
I've...
If you use zap2xml to get guide data from TVGuide.com, how long have you been doing it? Any problems with TVGuide.com data?
I've...