I've been reading and see you are (unknowingly using) syntax is sloppy. You only need ONE of the SET episodeNum!= lines above as it is a repeated command every time after the first. Moreover, there is no ;" (that's semicolon double-quote) following the end of the line to complete the phrase as you have properly included on the SET...
I've been reading and see you are (unknowingly using) syntax is sloppy. You only need ONE of the SET episodeNum!= lines above as...
Hi!
The Episodescanner is a little command line utility that scans your schedules and then adds episodenumber and seriesnumber to...
Dear Community
Sadly we have been notified by a family member, that Angus Mann passed away on 6 May 2010.
Our condolences go to his family and friends, I'm sure he is being sorrowfully missed by both them and our members he helped alike.
We have no choice but to close this thread, and thank Angus posthumously for his past...
Dear Community
Sadly we have been notified by a family member, that Angus Mann passed away on 6 May 2010.
Our condolences go...
Hi all. I have written a program to download TV guide data for Australia. It can output in XML for MediaPortal or Windows Media...
Zap2It confusion
I've been reading for a while about Zap2It not being supported for a while, but I decided to try it anyways. It was working for me fine for a few months after I installed Media Portal, but now today its not downloading anything. I then tried to use Yahoo to Go, and it populates the tvguide.xml yet nothing shows up...
Zap2It confusion
I've been reading for a while about Zap2It not being supported for a while, but I decided to try it anyways. It...
I'm not sure if anyone noticed this yet or not but it appears that zap2it will no longer be available to those of us who use it...
That means it is not possible to allow the MediaPortal TV Server to decode the UTF-8?
The only solution is using the WebEPG right?
Thanks for your help (y)
That means it is not possible to allow the MediaPortal TV Server to decode the UTF-8?
The only solution is using the WebEPG right...
Hi,
I'm having real difficulties to adjust properly the character encoding for Hungarian EPG. The special Hungarian characters are...
I have doneThe list box will now show your "channels" with drop down boxes to select the descriptions from the tvguide.xml file
After selecting descriptions, press "Save"
Verify the selections by pressing "Load/Refresh" again (all boxes should now be white) but they are still red , I will try again.
edit
I did it again and now...
I have doneThe list box will now show your "channels" with drop down boxes to select the descriptions from the tvguide.xml file...
http://zap2xml.110mb.com/
I got it to work in GB-PVR, but have yet to succeed in MP.
Update:
Since over a month now, I don't have EPG data for Germany any more. This is due to modification on website of tvinfo.de, and now tvxb is not configured to read the new situation anymore. mc2xml still runs fine for Belgian channels.
Question:
Is there anybody using webgrab+ actively.
Update:
Since over a month now, I don't have EPG data for Germany any more. This is due to modification on website of tvinfo.de...
Hi guys,
I have been using MP now for a few months and I like it VERY much.
A few days ago I had to reinstall my htpc...
My EPG fix-up is only needed when I know a change has been made to the schedule: e.g. when someone famous dies and all their films are shown. The process I have developed to remove phrases like New: from the description and put the series information from the EPG into the series fields runs every so many minutes (defined by the user)...
My EPG fix-up is only needed when I know a change has been made to the schedule: e.g. when someone famous dies and all their films...
Since yesterday, 2nd February 2019, and today, UK - BBC2 EPG has several programs with 'No information'. I guess this is a UK issue...
Yo más bien diría que ha estado funcionando bastante bien, y que últimamente vuelve a fallar. Y diría también que TVE hace con el mux suyo de TDT unas cosas muy raras... porque eso de "sin información" no es un mensaje de MediaPortal, si no que es TVE que envía un EPG con un sólo programa de 24h con título "sin información". Al menos...
Yo más bien diría que ha estado funcionando bastante bien, y que últimamente vuelve a fallar. Y diría también que TVE hace con el...
I would like to use this post to bring spanish users attention in order to find out if they are having the same issue.
The problem...
Thank you for your hard work!
By the way, I found a reason why I see "currently selected skin is outdated": it happens when I delete Blue3 skin I never use, and keep Blue3wide and a few more new skins, but the default it Blue3wide which is up to date. Strange..
Thank you for your hard work!
By the way, I found a reason why I see "currently selected skin is outdated": it happens when I...
Does anyone know of a way to show the sub-title field on the tvguide?
I'm currently using yapi2xml to grab my contents and...
Wow, I'm sorry to hear that news, and glad your family are okay.
Like I say: there's no rush here. Take your time, and let me know if/when you want to proceed.
Wow, I'm sorry to hear that news, and glad your family are okay.
Like I say: there's no rush here. Take your time, and let me know...
Can someone provide me a link on how to get a TV guide working in MP1? Yes I've searched the web and all I find is a pain the A%$...
gwatkins, glad you were able to get your recordings set up the way you wanted. My previous post was an attempt to explain the options using mc2xml/xmltv. I actually use the -b option so I could continue using my existing scheduled recordings. A few shows like local TV news always show up a "old" so I needed to tweak a few recordings...
gwatkins, glad you were able to get your recordings set up the way you wanted. My previous post was an attempt to explain the...
Is there a setting I'm missing to have only new episodes record?
currently when the season is over and repeat episodes are...
Ok, great, thank you! I'm going to give MP2 a try since it's going to be the newer version. Due to the learning curve here with the other members of the house, it may be the better route since it will be new from the start, rather than leaving Windows Media Center, training how to use MP1, then later down the road upgrade to MP2 &...
Ok, great, thank you! I'm going to give MP2 a try since it's going to be the newer version. Due to the learning curve here with the...
All,
I've decided to go ahead & upgrade from Windows 7 to Windows 10...but on my HTPC, I'm going to obviously lose Windows Media...
Nevermind, I got it. to move the channels you need to right click and then select the group you want to add to. If you drag and drop, despite there being a + sign suggesting it is the way, it doesnt work. I also didn't need to open and close Media Portal
dan
Nevermind, I got it. to move the channels you need to right click and then select the group you want to add to. If you drag and...
Hi, Im trying to get Zap2xml working on Media Portal 1 on Windows 10. Im located in California and want to watch ATSC. Ive been...
I just wanted to report that I followed the instructions from Cruzer to get the paid version of mc2xml.exe and got it to work without much difficulty. I am using the Windows 7/8 data service as was suggested in the email that I received along with the mc2xml file. My OS is Windows 10 Pro 64 bit. I am running MediaPortal 1.11.0.
I just wanted to report that I followed the instructions from Cruzer to get the paid version of mc2xml.exe and got it to work...
I've been using MediaPortal for many years. For the last couple of years, I've been getting my television EPG info from Microsoft...
Just as a note to others who may find this thread useful and I've book marked it as I forget how my EPG is setup. Freesat info no longer works, see this for how to fix it Freesat EPG in UK anyone?
Just as a note to others who may find this thread useful and I've book marked it as I forget how my EPG is setup. Freesat info no...
Hi,
Despite Channel 4 HD withdrawing from Freesat - the broadcast still seems to work but there is very limited EPG (now/next...
All the EPG for freesat comes from a single channel (MP detects it as a "radio" channel). So I couldn't use the "only grab EPG for this transponder" idea because the EPG comes from a channel that isn't on the same transponder as most of the normal channels.
There's only limited terrestrial freeview where I am (only two of the...
All the EPG for freesat comes from a single channel (MP detects it as a "radio" channel). So I couldn't use the "only grab EPG for...
I've been getting a lot of problems recently with scheduled recordings not being shown on the guide. The schedules themselves are...
Bit of a shameless plug here but have you looked at the updates i did to the xmltv grabber ?
https://forum.team-mediaportal.com/xmltv_2_source_binary_now_available-t25247.html
It's for the TV-Server only though, don't know if you're using that or not.
Bit of a shameless plug here but have you looked at the updates i did to the xmltv grabber ...
I have created a EPG program for Sweden which is currently in Pre-release (I have a few beta testers). It works well with MP and...
Of course! No EPG grabbing while timishifting! I didn't think about that option!
Thanks a lot for your time and help. I'm gonna check how work webepg and xmltv epg plugins to see if I can find a better provider for Belgium channels.
Of course! No EPG grabbing while timishifting! I didn't think about that option!
Thanks a lot for your time and help. I'm gonna...
I am pleased with MP 1.3 extended with the Titan skin. However, I am not getting the colour coded genres. The epg does display at...
Hi bd0426,
Yes, I have all of those options un-checked. I just installed the updated DLL, forced a guide update upon restart, restarted the TVServer Service, and as of right now, both the "custom" channel numbers and channel names appear to be sticking, but I'll follow up in a couple of days to fully confirm.
Thanks!
Hi bd0426,
Yes, I have all of those options un-checked. I just installed the updated DLL, forced a guide update upon restart...
I apologize if I am being dense. I could not find any posts that mirror my issue, so I shall ask those in the know...
I have MP...
I have to apologize! I checked all these "missing" channels by their SID and figured out I deleted them in TVServer channel section. So, logfile is correct and this is only overhead from other channels on same transponder or channels I never wanted in my list.
---
j.carter
I have to apologize! I checked all these "missing" channels by their SID and figured out I deleted them in TVServer channel...
OK, I have rebuilt this a couple times... originally i had trouble with scanning my channels (i have a DishPro LNB setup) I got...