I've been reading and see you are (unknowingly using) syntax is sloppy. You only need ONE of the SET episodeNum!= lines above as it is a repeated command every time after the first. Moreover, there is no ;" (that's semicolon double-quote) following the end of the line to complete the phrase as you have properly included on the SET...
I've been reading and see you are (unknowingly using) syntax is sloppy. You only need ONE of the SET episodeNum!= lines above as...
Hi!
The Episodescanner is a little command line utility that scans your schedules and then adds episodenumber and seriesnumber to...
Dear Community
Sadly we have been notified by a family member, that Angus Mann passed away on 6 May 2010.
Our condolences go to his family and friends, I'm sure he is being sorrowfully missed by both them and our members he helped alike.
We have no choice but to close this thread, and thank Angus posthumously for his past...
Dear Community
Sadly we have been notified by a family member, that Angus Mann passed away on 6 May 2010.
Our condolences go...
Hi all. I have written a program to download TV guide data for Australia. It can output in XML for MediaPortal or Windows Media...
I have doneThe list box will now show your "channels" with drop down boxes to select the descriptions from the tvguide.xml file
After selecting descriptions, press "Save"
Verify the selections by pressing "Load/Refresh" again (all boxes should now be white) but they are still red , I will try again.
edit
I did it again and now...
I have doneThe list box will now show your "channels" with drop down boxes to select the descriptions from the tvguide.xml file...
http://zap2xml.110mb.com/
I got it to work in GB-PVR, but have yet to succeed in MP.
That means it is not possible to allow the MediaPortal TV Server to decode the UTF-8?
The only solution is using the WebEPG right?
Thanks for your help (y)
That means it is not possible to allow the MediaPortal TV Server to decode the UTF-8?
The only solution is using the WebEPG right...
Hi,
I'm having real difficulties to adjust properly the character encoding for Hungarian EPG. The special Hungarian characters are...
Zap2It confusion
I've been reading for a while about Zap2It not being supported for a while, but I decided to try it anyways. It was working for me fine for a few months after I installed Media Portal, but now today its not downloading anything. I then tried to use Yahoo to Go, and it populates the tvguide.xml yet nothing shows up...
Zap2It confusion
I've been reading for a while about Zap2It not being supported for a while, but I decided to try it anyways. It...
I'm not sure if anyone noticed this yet or not but it appears that zap2it will no longer be available to those of us who use it...
Dunno probably my fault :) The thing is, seems like WebEPG is easier to setup (a lot) and I saw no difference in the epg data between the two. Seems like neither give me Season and Episode number. I have MCE Buddy which the latest version takes the file recorded by MP and grabs (via metadata I guess) the info it needs and renames it...
Dunno probably my fault :) The thing is, seems like WebEPG is easier to setup (a lot) and I saw no difference in the epg data...
Does anyone have a good suggestion on how to set up EPG for US TV specificly around the Washington DC area? I have read and tried a...
Update:
Since over a month now, I don't have EPG data for Germany any more. This is due to modification on website of tvinfo.de, and now tvxb is not configured to read the new situation anymore. mc2xml still runs fine for Belgian channels.
Question:
Is there anybody using webgrab+ actively.
Update:
Since over a month now, I don't have EPG data for Germany any more. This is due to modification on website of tvinfo.de...
Hi guys,
I have been using MP now for a few months and I like it VERY much.
A few days ago I had to reinstall my htpc...
Yo más bien diría que ha estado funcionando bastante bien, y que últimamente vuelve a fallar. Y diría también que TVE hace con el mux suyo de TDT unas cosas muy raras... porque eso de "sin información" no es un mensaje de MediaPortal, si no que es TVE que envía un EPG con un sólo programa de 24h con título "sin información". Al menos...
Yo más bien diría que ha estado funcionando bastante bien, y que últimamente vuelve a fallar. Y diría también que TVE hace con el...
I would like to use this post to bring spanish users attention in order to find out if they are having the same issue.
The problem...
I'm trying to move from webepg to dvb epg grabbing using canal digital cable (norway). I've read somewhere that SVT1 contains a week for EPG for all channels, and when choosing SVT1 in the EPG channel list, the log shows epg for all channels. The problem however is that the EPG info is only assigned to the SVT1-channel. Log says the...
I'm trying to move from webepg to dvb epg grabbing using canal digital cable (norway). I've read somewhere that SVT1 contains a...
MediaPortal Version: 1.0.2
MediaPortal Skin: Black Glass
Windows Version: vista home premium
CPU Type: Inte C2d 8200
HDD...
I just wanted to report that I followed the instructions from Cruzer to get the paid version of mc2xml.exe and got it to work without much difficulty. I am using the Windows 7/8 data service as was suggested in the email that I received along with the mc2xml file. My OS is Windows 10 Pro 64 bit. I am running MediaPortal 1.11.0.
I just wanted to report that I followed the instructions from Cruzer to get the paid version of mc2xml.exe and got it to work...
I've been using MediaPortal for many years. For the last couple of years, I've been getting my television EPG info from Microsoft...
John,
We actually have fairly similar systems, except you have a much more current MP version, and are getting TV via antenna.
If you decide to return to MP, I would show you how I get tvguide data, if you're interested. Hauppauge tells me that they do not contract with TitanTV, so I don't think you'll ever successfully get data from...
John,
We actually have fairly similar systems, except you have a much more current MP version, and are getting TV via antenna.
If...
Can anyone help me learn how to access TitanTV with an EPG grabber? Like other USA based MP users I’ve lost Imdb (WebEPG) access...
Nevermind, I got it. to move the channels you need to right click and then select the group you want to add to. If you drag and drop, despite there being a + sign suggesting it is the way, it doesnt work. I also didn't need to open and close Media Portal
dan
Nevermind, I got it. to move the channels you need to right click and then select the group you want to add to. If you drag and...
Hi, Im trying to get Zap2xml working on Media Portal 1 on Windows 10. Im located in California and want to watch ATSC. Ive been...
In v1.0.2 WebEPG is a standalone executable. It is configured using WebEPG-conf (separate executable). You can either schedule the grab using Windows' Task Scheduler, or you can use WebEPGGrabber plugin (a process plugin in MediaPortal). WebEPGGrabber plugin is not a separate file, it is contained in ProcessPlugins.dll. You don't need...
In v1.0.2 WebEPG is a standalone executable. It is configured using WebEPG-conf (separate executable). You can either schedule the...
Hi everybody,
Maybe it is a stupid question... but I have looked at the download/plugin section, actually I have looked...
What you've described here sounds like Windows preparing for an automatic update and/or reboot. As you are no doubt aware, Windows 10 does install updates automatically. I don't use W10, but I'm told automatic updates can be prevented via the registry or a config policy.
Yep, sure. Whatever works best for you. :)
What you've described here sounds like Windows preparing for an automatic update and/or reboot. As you are no doubt aware, Windows...
Hiya, I'm using MediaPortal v1.8.0, DVB-T, Windows 8, TV EPG Grabber, in the UK.
Had to retune recently and where i can now view...
Hi I have successfully got the tvguide.xml to import but it hasn't taken all the channels as in the digiguide, is there a limit to how many channels it can do?
Pete
Hi I have successfully got the tvguide.xml to import but it hasn't taken all the channels as in the digiguide, is there a limit to...
Hi
I am still learning MP and trying to get it configured to my liking. Sorry for all the newbie questions.
I don't fully...
Your right
But with the setup you have, you are more likely to find someone who has had exactly the same problem and found the workaround.
Not every post read by all.
Your right
But with the setup you have, you are more likely to find someone who has had exactly the same problem and found the...
Hello,
Iam trying around with the various possibilities to get EPG-data into MP resp. TVServer3 in my case since a couple of weeks...
Thank you for your hard work!
By the way, I found a reason why I see "currently selected skin is outdated": it happens when I delete Blue3 skin I never use, and keep Blue3wide and a few more new skins, but the default it Blue3wide which is up to date. Strange..
Thank you for your hard work!
By the way, I found a reason why I see "currently selected skin is outdated": it happens when I...
Does anyone know of a way to show the sub-title field on the tvguide?
I'm currently using yapi2xml to grab my contents and...
Ok I have forgotten were this was done at could someone clear this up please? Thanks again.....
:ooops:
Be sure to set your recording naming convetion to include the episode information so MyTVSeries can automatically figure out what episodes are recorded:
For example:
%title%\%title% - %episode% - %name%
In case some looking...
Ok I have forgotten were this was done at could someone clear this up please? Thanks again.....
:ooops:
Be sure to set your...
MediaPortal Version: the newest one
MediaPortal Skin: blue
Windows Version: xp pro
CPU Type: intel penteum 4
HDD: md-3200 sata...
gwatkins, glad you were able to get your recordings set up the way you wanted. My previous post was an attempt to explain the options using mc2xml/xmltv. I actually use the -b option so I could continue using my existing scheduled recordings. A few shows like local TV news always show up a "old" so I needed to tweak a few recordings...
gwatkins, glad you were able to get your recordings set up the way you wanted. My previous post was an attempt to explain the...
Is there a setting I'm missing to have only new episodes record?
currently when the season is over and repeat episodes are...
My EPG fix-up is only needed when I know a change has been made to the schedule: e.g. when someone famous dies and all their films are shown. The process I have developed to remove phrases like New: from the description and put the series information from the EPG into the series fields runs every so many minutes (defined by the user)...
My EPG fix-up is only needed when I know a change has been made to the schedule: e.g. when someone famous dies and all their films...
Since yesterday, 2nd February 2019, and today, UK - BBC2 EPG has several programs with 'No information'. I guess this is a UK issue...
Ok, great, thank you! I'm going to give MP2 a try since it's going to be the newer version. Due to the learning curve here with the other members of the house, it may be the better route since it will be new from the start, rather than leaving Windows Media Center, training how to use MP1, then later down the road upgrade to MP2 &...
Ok, great, thank you! I'm going to give MP2 a try since it's going to be the newer version. Due to the learning curve here with the...
All,
I've decided to go ahead & upgrade from Windows 7 to Windows 10...but on my HTPC, I'm going to obviously lose Windows Media...
Just as a note to others who may find this thread useful and I've book marked it as I forget how my EPG is setup. Freesat info no longer works, see this for how to fix it Freesat EPG in UK anyone?
Just as a note to others who may find this thread useful and I've book marked it as I forget how my EPG is setup. Freesat info no...
Hi,
Despite Channel 4 HD withdrawing from Freesat - the broadcast still seems to work but there is very limited EPG (now/next...