General Support (132 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
  • Locked
  • Sticky
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your post! Useful Wiki information: Known Issues Troubleshooting FAQ
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your...
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your...
Replies
0
Views
16K
Could it be because the tuner was in use in another application? Good luck with whatever other software you try. For anyone else reading this in future: It is better to start a thread -->here<-- than revive such an old thread. Post your log files as per the instructions -->here<-- so we have the information we need to be able to...
Could it be because the tuner was in use in another application? Good luck with whatever other software you try. For anyone else...
EVERYONE WITH ATSC CARDS: If you can get your card to autotune, Please disable EPG. Doing this has allowed me to use a VBox DTA-150...
Replies
506
Views
132K
Hyper threading is same as multicore from the driver / software point of view when it comes to thread scheduling.
Hyper threading is same as multicore from the driver / software point of view when it comes to thread scheduling.
TV-Server Version: TVE 3 latest SVN (usually) MediaPortal Version: 0.2.3.0 latest SVN (usually) MediaPortal Skin: BlueTwo...
Replies
448
Views
67K
MP1 MP2 ATI 690G/x1250 problems (2 Viewers) DE
I had the freezing problem only with older drivers but i dont know with which... with 9.11 legacy and 10.2 legacy i had only the unable to play error caused by the /3GB switch in boot.ini now there are no freezing problems. (with win xp, 10.2 legacy without ccc, only driver but i think with ccc there are no problems too, saf500 codec)
I had the freezing problem only with older drivers but i dont know with which... with 9.11 legacy and 10.2 legacy i had only the...
TV-Server Version: MediaPortal Version: 0.2.3.0 RC2 and RC3 MediaPortal Skin: BleTwo/default Windows Version: WinXP MCE 2005...
Replies
416
Views
112K
Oh brother - I can confirm that ;):D;)
Oh brother - I can confirm that ;):D;)
Hi all! Since the installation of the falls creators update of win10 i have a big problem: Whenever i start a video file (h264...
Replies
308
Views
65K
Looks very interesting solution: FFDSHOW logoaway feature is easier to configure based on a file name for the automatic profile selection. The TS file name is hidden when RTSC is used.
Looks very interesting solution: FFDSHOW logoaway feature is easier to configure based on a file name for the automatic profile...
=================================================================== EDIT: The modifications in this thread are now included in MP...
Replies
282
Views
85K
MP1 MP2 Media Portal freezes on wake (1 Viewer) DE
Thank you again for having a look into my log files. I do really think this is a Windows 10 issues because with Windows 8.1 there was not a problem. So is it possible to disable that away mode at all? So that MediaPortal will be active even the monitor is switched of...
Thank you again for having a look into my log files. I do really think this is a Windows 10 issues because with Windows 8.1 there...
I have searched and haven't seen others with this issue. I though it was the skin, but I changed that and it still happens...
Replies
202
Views
21K
Correct - it was deemed a re-work, and only bug fixes were allowed at the time. The TsReader here - https://forum.team-mediaportal.com/780079-post59.html - has all patches to date..... Tony
Correct - it was deemed a re-work, and only bug fixes were allowed at the time. The TsReader here -...
I hve just upgraded to RC3 and have noticed that there is a audio/video sync problem when watching live TV. The audio is delayed...
Replies
152
Views
25K
Very cool! I'm actually in the middle of migrating my whole MediaPortal system (complete with 5 tuner cards and different sources) over to a new Ryzen 3 - based server this weekend. I'll give this a try when I get to my Colossus 2 - which won't be until tomorrow at this rate. Thanks for the heads-up!
Very cool! I'm actually in the middle of migrating my whole MediaPortal system (complete with 5 tuner cards and different sources)...
Ever since my family upgraded to HD dish I've been trying to get our media PC to record the playback. I am currently just...
Replies
150
Views
50K
I added a little Schedules Direct setup info to the mc2xml/xmltv setup guide, see http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/13_Setup_Guides/2_TV_Setup/4_TV_Guide_Setup_(EPG)/XMLTV_mc2xml
I added a little Schedules Direct setup info to the mc2xml/xmltv setup guide, see...
I'm evaluating MP1.6 as a replacement for SageTV (I'm still wrestling with getting usable program guide data to schedule...
Replies
140
Views
37K
I don't believe this is solved. MP1.23 contains three EN IMDB grabbers and all of them result in Plot = "unknown". Solved would be that the latest MP1.23 or latest online grabbers only have one EN IMDB grabber and it gets all the data correctly. To the extent that there is a solution outside of a Mediaportal official release, is that...
I don't believe this is solved. MP1.23 contains three EN IMDB grabbers and all of them result in Plot = "unknown". Solved would be...
This is not just in 1.20, I had the problem in 1.19 as well. But to confirm the problem I upgraded to the latest. I have tried...
Replies
129
Views
13K
ah that looks and works good on my side, I like it (y)
ah that looks and works good on my side, I like it (y)
Hi All I hope you can help me, I have set-up a MediaPortal HTPC for my dad just before leaving South Africa to go and work in...
Replies
126
Views
20K
why should i start a new thread when i started this one originally?! i dont use avg nor do i use the com skip plug in.
why should i start a new thread when i started this one originally?! i dont use avg nor do i use the com skip plug in.
all of a sudden I cant record tv its driving me insane. has this happened to anyone else or does anyone know a fix? ive included...
Replies
119
Views
22K
MP1 MP2 Windows 7 Support DE
Thanks for the head up. I was aware of this and i will use the latest 1.1.0 Alpha + latest SVN. I notice also that some people are having issues with the hauppuage cards not scanning etc. I have a novaT-500 and the NovaS2 installed with a dish and 4LNB's so i will be sure to check that out and give any help/feedback i can :) Regards Kev
Thanks for the head up. I was aware of this and i will use the latest 1.1.0 Alpha + latest SVN. I notice also that some people are...
Well I Installed Windows 7 Beta on a a new Partition. I really like it only problem is I tried to install Media Portal and it says...
Replies
118
Views
27K
Just to update this for anyone who stumbles across this old thread: Updating to a Haswell Intel NUC and Windows 8.1 has done nothing to solve the crashing problem. In fact the NUC has no optical out so now I must buy a Dr HDMI again!
Just to update this for anyone who stumbles across this old thread: Updating to a Haswell Intel NUC and Windows 8.1 has done...
Steps to Reproduce: 1. Use MP in any way. 2. Turn off TV. 3. Turn TV back on. 4. Windows error appears. Using Windows 7, MP...
Replies
108
Views
19K
Hey all, So... I did some research and found out that CableLabs changed the CableCard specification to allow content provider DRM to override the CCI flags applied by the cable companies. In many cases, a cable company could override a content provider's DRM by setting the feed to "CCI Copy Freely." In my particular instance, WOW...
Hey all, So... I did some research and found out that CableLabs changed the CableCard specification to allow content provider DRM...
Hey everyone, I'm consistently having the TV server crash on me right as recordings end. Its not happening everytime... but it...
Replies
102
Views
13K
  • Locked
MP1 MP2 AIW Card support DE
For some reason the ATI installer isn't accepting your cards ASIC as elligible for the encoder instal. Use the 6.6 encoder package as this is not as restrictive as the 6.8 ; I have both installed on my system and run MMC9.15 and MP. Run the 6.6 encoder instal twice and force the modify settings for all options again on the...
For some reason the ATI installer isn't accepting your cards ASIC as elligible for the encoder instal. Use the 6.6 encoder...
Hi - I worked with a chap in the US (RichardTV) with an AIW 9800 Pro card in an attempt to get it working with the MPEG-2 TV engine...
Replies
101
Views
45K
Scusate ragazzi dove posso reperire il software in oggetto? grazie anticipatamente
Scusate ragazzi dove posso reperire il software in oggetto? grazie anticipatamente
Salve a tutti. Visto gli ultimi eventi legati all'EPG di Sky sono corso ai ripari. In allegato trovate un programmino che scarica...
Replies
100
Views
40K
MP1 MP2 Stereo Sound on 5.1 Speaker Setup (2 Viewers) DE
Yes.
Yes.
Hi, I have a Yamaha RX-V681 with 5.1 speakers (Teufel LT2 MK2 5.1). Latest MediaPortal, latest LAV Filter, latest nVidia drivers...
Replies
97
Views
17K
A
MP1 MP2 AverTV DVB-T 771 DE
Hi, Twirrim, Are you running XP or MCE? XP will not run dual DVT cards without some tweaking. MCE will do it out of the box. Check out the Tips and Tricks forum for the location of the newer dlls that MS has only released for MCE (thereby trying to stop any rival products). chewbacka, I think the 777 card should work. It's...
Hi, Twirrim, Are you running XP or MCE? XP will not run dual DVT cards without some tweaking. MCE will do it out of the box...
Has anybody managed to use MP with this card? With what version of MP and Aver software? I just keep getting errors and I would...
6 7 8 9 10
Replies
94
Views
42K
I'm using a hdmi detective for years now. Don't know if that has something to do with this?
I'm using a hdmi detective for years now. Don't know if that has something to do with this?
Hi Seb I don't know if you are still interested but I'm getting MP crashes on resume from sleep on a fairly regular basis. I can do...
Replies
92
Views
14K
Hey :) Can you make logs, it's really a pain with Intel GPU :(
Hey :) Can you make logs, it's really a pain with Intel GPU :(
Hi, DRR has stopped working. What is the problem please? thx Edit by Team Member : Installation link including the fix ...
Replies
92
Views
18K
I have same question? Working? If yes - How? THX. Stanik
I have same question? Working? If yes - How? THX. Stanik
Hi guys! I have the HVR-1300 card with the 45 btn remote. MP v0.2.0.0 RC2 kept crashing on startup until I found out that it was...
Replies
91
Views
20K
I tried every card definitions. NSP, WDM and VIVO... none of them worked. In Graphedit the ATI Encoders are not listed. I tried to install them several times and i tried to register the encoder by regsvr32 atimcenc.dll. But without sucess :(
I tried every card definitions. NSP, WDM and VIVO... none of them worked. In Graphedit the ATI Encoders are not listed. I tried to...
An overview of the latest support of ATI AIW cards with MediaPortal v0.2.x.x. (early pages in this thread should be ignored as out...
Replies
85
Views
24K
MP1 MP2 TVE3.5 for MP1 DE
I think it should be enough :) I don't remember exact change needed, for sure TVE35 master branch is really old lol
I think it should be enough :) I don't remember exact change needed, for sure TVE35 master branch is really old lol
Hi there :-) Last weekend I tried to find a proper branch from git to build TVE3.5 for MP1 1.10,or 1.11, but I could not find one...
Replies
85
Views
14K
The encoder package is at the moment available on tingy.pw if anyone is still looking for it.
The encoder package is at the moment available on tingy.pw if anyone is still looking for it.
I extracted/modified the MainConcept (Hauppauge) MPEG2-Encoder Files for the use with ALL Software-Encoder based cards (ALL Brands...
Replies
85
Views
49K
Code is fine and will setup Mediaportal dev box tomorrow but see no issues with it as most of CSAudio is meant as drop-in replacement :)
Code is fine and will setup Mediaportal dev box tomorrow but see no issues with it as most of CSAudio is meant as drop-in...
Hi, Been debugging an issue with @Virtual in the AudioSwitcher topic and is as follows: - Start Mediaportal with volume control...
Replies
82
Views
14K
Seems like Quality Control for Hauppauge is broken again in TVServer RC2.
Seems like Quality Control for Hauppauge is broken again in TVServer RC2.
Hi, ****EDIT**** Support for this is now in the latest svn. Let me know how it goes. I'm working on getting quality control...
Replies
82
Views
24K
I'm on 1.9.0 and it is still happening to me, I am going to disable autostart in windows and see if it stops it happening
I'm on 1.9.0 and it is still happening to me, I am going to disable autostart in windows and see if it stops it happening
MP 1.4 has been working a dream for me until the latest windows updates. I have a HTPC that automatically boots up each day and...
Replies
81
Views
18K
MP1 MP2 HVR - 2200 Support DE
Just as a test have you created the two hybrid tuners and then tried FM tuning on both? DMAN
Just as a test have you created the two hybrid tuners and then tried FM tuning on both? DMAN
Does anyone have any experiences with MP and HVR-2200 card? MP doesn’t support them When I want to add Capture card in Confiration...
Replies
79
Views
19K
A
yah as do i ... whats the difference ?
yah as do i ... whats the difference ?
I wrote a simple plug-In for ATI remote wonder. It will send keyboard command to the main MP window when it's active. Mapped...
4 5 6 7 8
Replies
74
Views
37K
Top Bottom