Post problems you have when using MediaPortal,
or pre installation questions in here.
May I point you to this? Next/previous track actions take very long since update to MP 1.27
May I point you to this? Next/previous track actions take very long since update to MP 1.27
Discovered today that the Dynamic refresh rate is being improperly reported and set on my systems (server and also a client). When...
Why not just update to 1.2.3? Can it do any harm?
You don't even know that the problem Miroslav22 is seeing is caused by the same thing that yours is.
Even if the problem is still there, what have you lost? Everything else will work better!
Why not just update to 1.2.3? Can it do any harm?
You don't even know that the problem Miroslav22 is seeing is caused by the same...
I have a maddening problem that dates back to Sept 2010, just after I started using MP.
The problem was roughly described in...
No, I am just teasing you. Having a laff with you not at you :) no worries it happens all the time, specially if you use a phones autocorrect.
No, I am just teasing you. Having a laff with you not at you :) no worries it happens all the time, specially if you use a phones...
I have a new HTPC I built two days ago. i5-6500 with an GA-170X-Gaming 7 (the motherboard supports HDMI 2.0) and 16 GB of DDR4. It...
Web Browser Bookmarks
Hi Using the WebBrowser plugin and it works fine apart from me being able to display Firefox Bookmarks. What I get is the folders displayed in MP from the location where the bookmarks.html file is located but no files. Any suggestions for correcting this would be welcome.
Web Browser Bookmarks
Hi Using the WebBrowser plugin and it works fine apart from me being able to display Firefox Bookmarks. What...
Web Browser Plugin working in 0.2.0.4 ?
I am wondering if anyone can confirm if the Web Browser plugin is working with 0.2.0.4 ...
https://forum.team-mediaportal.com/threads/tv-upgrade-combined-rtsp-hevc-video-and-live-tv-rate-matching-improvements.135000/
https://forum.team-mediaportal.com/threads/tv-upgrade-combined-rtsp-hevc-video-and-live-tv-rate-matching-improvements.135000/
Hi,
why is it not possible to get this channel:
Astra 19.2 E, 11.406 V, SR 22000, FEC 2/3, DVB-S2 – 8PSK
?
Is it not possible...
OK, it's been a very long time, but for completeness: the MySQL problems persisted (slow startup) whatever I tried. Then a recent power cut messed up my HTPC and I had some repairs to do - and thought I'll have another go at getting MySQL to work properly. Tried a complete uninstall (including relevant program and app data folder...
OK, it's been a very long time, but for completeness: the MySQL problems persisted (slow startup) whatever I tried. Then a recent...
Oh dear, back again...
Everything working except MP's TV service doesn't start automatically with Windows (MP 1.2, XP SP3, all the...
It was the rubber in gimp;)
Conclusion: We need to provide as much as possible informations in the database. How they get used is your decision. I will find my way :cool:
It was the rubber in gimp;)
Conclusion: We need to provide as much as possible informations in the database. How they get used is...
Using MediaPort 8 on Windows 7. For the guide I am following the instructions here for configuring MC2XML and XMLTV. The guid is...
Change
<connection sourcefilter="capture" sourcepin="4" sinkfilter="audencoder" sinkpin="0"/>
TO
<connection sourcefilter="capture" sourcepin="3" sinkfilter="audencoder" sinkpin="0"/>
Carefuly in the XML file for the graph construct.
Also the ATI MPEG filters aren't the correct filters, they have to be the ATI Media...
Change
<connection sourcefilter="capture" sourcepin="4" sinkfilter="audencoder" sinkpin="0"/>
TO
<connection...
I noticed that support for these really new cards where removed.
I, unfortunately updated to the latest Radeon drivers, and they...
According to the information on Sony's web site:-
"3 LCD Technology Grand WEGA incorporates three wide XGA high-resolution LCD panels"
which implies that the native resolution is 1280x720 - WXGA.
In that case, setting the output of the video card to 720p would be ideal.
As I said earlier, I get perfect stutter-free HDTV...
According to the information on Sony's web site:-
"3 LCD Technology Grand WEGA incorporates three wide XGA high-resolution LCD...
I am having problems playing back ts / hdtv files on Media portal which runs fine on Windows Media Player 10 with video mixing...
I have released an improved version of the config file and AutoHotKey script for the Ortek/Hama remote control, available from the post below:
https://forum.team-mediaportal.com/threads/vista-mce-remote-control-vrc-1100.94301/page-6#post-1198295
-- from CyberSimian in the UK
I have released an improved version of the config file and AutoHotKey script for the Ortek/Hama remote control, available from the...
Hello!
Upgrading to MP 1.12 gives me some trouble using my remote controls and defining the proper button codes in the proper...
Thanks for your testing :)
Yep V2 should act like V1 but i handle the code differently and for sure related to textboxscrollup and you just tested regression.
Yes you can try the installer based on 1.13 and you can do the upgrade to 1.14 Pre and Final release :)
Thanks again.
Thanks for your testing :)
Yep V2 should act like V1 but i handle the code differently and for sure related to textboxscrollup and...
I think there is inconsistent behavior with defines in textboxscrollup (maybe introduced or not completely solved by MP1-4695). I...
Update: With the "PowerScheduler forces system to go to standby when idle" option Windows goes to Standby mode even while EPG scan is running. (y)
However, since I'm not only using my PC for MediaPortal, I'd like to leave Windows handling the power modes - respecting MediaPortal actions like watching TV or recording.
I'd really...
Update: With the "PowerScheduler forces system to go to standby when idle" option Windows goes to Standby mode even while EPG scan...
Although this post is very old, the problem still or again is existing. As long as EPG runs, Windows Standby mode is prevented...
No playback issues from LiveTV on HD channels
No playback issues from LiveTV on HD channels
Hi
There has been alot of discussions about what medium is best for timeshifting on a dedicated MP server. Today I found out that...
Hey Folks,
Just to let you all know that im still working on it. Got one bug left to fix then I can release a beta. Does anyone have any experience on why mkisofs.exe sometimes crashes with a stackdump? If I call it from a bat file in a command line then all ok....but if I call the same bat file from MP it crashes.
Egon
Hey Folks,
Just to let you all know that im still working on it. Got one bug left to fix then I can release a beta. Does anyone...
I've just bought a DVD burner so I can use the MyBurner plugin to burn audio CD's.
But the plugin doesn't seem to be working...
I have a 1.2x installation at my sisters, she has fiber 100/100 and i have cable 60/6 but i never had trouble streaming hd channels. Might be the overkill on upstream from my sister though.
I have a 1.2x installation at my sisters, she has fiber 100/100 and i have cable 60/6 but i never had trouble streaming hd...
I can't seem to connect to my MP TV Server at home from work when connected via a VPN. It definitely used to work but I haven't...
Thank you for picking up my post, I wasn’t expecting any reply, my initial post was a thank you, then a post to correct my stupidity in not checking everything before posting.
As @Stéphane Lenclud has suggested I will start a new thread about my problem on the forum.
And then if possible, place a link to it from here.
Thank you for picking up my post, I wasn’t expecting any reply, my initial post was a thank you, then a post to correct my...
I have two remotes available to me. I have one Windows MCE remote and one Hauppauge remote. I cannot get the Hauppauge unit to...
This is my experience with 0.2.1.0, in case it helps.
With 0.2.1.0 installed, I had to do a rescan. The first one gave me the channels in the order found and not in logical channel sequence. I swapped the MPSA.ax in windows\system32 with the one attached to this thread and reran. It worked - the channels were in the right order. I...
This is my experience with 0.2.1.0, in case it helps.
With 0.2.1.0 installed, I had to do a rescan. The first one gave me the...
Hi,
I'm using Mediaportal 2 in the UK, and have just scanned for Freeview tv stations on my Terratec Cinergy 2400i DT card...
As it seems similar I added my problem as well.
Mfg
Flo
As it seems similar I added my problem as well.
Mfg
Flo
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Thanks robomonkey,
I'll have a shot tonight at manually adjusting the channels, even if that reduces the chance of MP crashing so very often it would help.
I've tried to disable DVB-EPG grabbing myself, but it doesn't switch off - when I untick the box it just greys out and stays ticked. If I then quit and reopen configure the...
Thanks robomonkey,
I'll have a shot tonight at manually adjusting the channels, even if that reduces the chance of MP crashing...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-25)
MediaPortal Skin: BlueTwo1280x720
Windows Version...
If you suspect that this problem is caused by resolution changes, it might be worthwhile seeing if you can find the registry setting that defines the default screen size that Windows uses.
I used WMC for five years, and this problem was prevalent among WMC users too (including me!). I vaguely remember a "fix" that involved changing...
If you suspect that this problem is caused by resolution changes, it might be worthwhile seeing if you can find the registry...
Hi there, i can't figure it out, when i put pc into sleep and afterwards wake it win 7 64 resume good only mediaportal is stuck on...
I puchased a Medion computer (ALDI) version, running Windows Vista Home Premium that came in shipped with an X10 remote. I installed MP on the machine (sure beats the MCE that was included in the Vista system) but one of the problems I had, which was also visible from other users using this remote was that it would either not work, or...
I puchased a Medion computer (ALDI) version, running Windows Vista Home Premium that came in shipped with an X10 remote. I...
He guys,
can someone tell me which "action i have to use to map a remote key to what useually the keyboard key "x" does.
I...
Since I disable DDR - problem not back
Many thanks to all !
Since I disable DDR - problem not back
Many thanks to all !
Hi,
Recently I encountered a very annoying problem with MediaPortal and I would really appreciate any help debugging it. My video...
Hi
Ok after I disabled timestretch it seems to be ok - at least after 2h testing
Hi
Ok after I disabled timestretch it seems to be ok - at least after 2h testing
For some reason I'm having big issues with the MPAR and sound becoming more and more out of sync with the picture, it was fine and...
yeah! I got it working, too :lol:
Upgrading the drivers and install cvs version (I used cvs from 02-13-2006) did the trick.
I'm using windows MCE, and I really struggeled to make it work. Installing the hauppauge drivers partly failed, by following the isntructions on the driver site. However, by installing the standalone driver...
yeah! I got it working, too :lol:
Upgrading the drivers and install cvs version (I used cvs from 02-13-2006) did the trick.
I'm...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2005-12-16)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
I've moved the fix on to the 'request merge' stage in Jira, as it's probably had all the testing it's going to get from this thread, so it should go into 1.21 pre-release.
I've moved the fix on to the 'request merge' stage in Jira, as it's probably had all the testing it's going to get from this...
I've downloaded and installed MP 1.19, everything seemed to be fairly nice... I scanned the frequencies I wanted: DVB-T (514MHz)...
Hi Dimka,
Yes, you are right. The world is small and Denmark very small indeed. Funny that you live here in town. We just moved to a brand new house in Ullerødbyen from an apartment in the center of the town. We might even share acquaintances as we know several Danish-Russian and Russian-Russian couples from around here.
Best...
Hi Dimka,
Yes, you are right. The world is small and Denmark very small indeed. Funny that you live here in town. We just moved to...
Hi,
I used to watch TV through MP using a special 3rd party plugin that used VLC to playback to stream content from my IPTV...
Sorry to bump the month old topic. Just saw this amazing community and after hours of trial and errors came to this thread to know about the limitation of MediaPortal to support analog tv cards with audio line out. A lot of low end TV Tuner cards are sold in India with many manufacturers like Intex, Techcom, etc; even today with the...
Sorry to bump the month old topic. Just saw this amazing community and after hours of trial and errors came to this thread to know...
I'm unable to find any channels when scanning and from the logs I can see that the filters for audio and video cannot be found...
Glad to here it :)
I'm 90-95% happy with MePo. There are a few occasional issues/improvements:
No free tuners - Hopefully fixed with 1.3.0B
MePo crashes/hangs occasionally - On going issue
Issues will channel moves/duplicates not tuning
CEC integration
etc....
But nothing too major :)
J.
Glad to here it :)
I'm 90-95% happy with MePo. There are a few occasional issues/improvements:
No free tuners - Hopefully fixed...
Hi Guys
I have just completely setup a new MP system (new server and re-installed client). All was working just fine today, but...
Final , (added Helmond freq 298750)
will post in tuningdetails
Final , (added Helmond freq 298750)
will post in tuningdetails
Ziggo is changing his tuning settings country wide:
You will get a letter from them , with a date for you change.
This attached...
Hmm fair enough but I'm not sure servers have special drivers, at least for home user equipment. I certainly am just using Windows 8 x64 drivers for everything. Anyway, I updated the tuner driver to 9.1.0.0, which officially support Windows 8/Server 2012 (8.1.1.2 didn't), and I've now been watching an encrypted HD channel for an hour...
Hmm fair enough but I'm not sure servers have special drivers, at least for home user equipment. I certainly am just using Windows...
folks,
I see this in my logs a lot (the TSWriter.log file). Shows appear to get recorded, I can watch TV etc. There is a slight...