General Support (155 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
MP1 MP2 Skinning the EPG / render order? (1 Viewer) DE
Pleased to say that I have solved this, and believe it or not, it was a fault with the recording pin control on the xml which had the knock on effect with the highlight, which only goes to show the sensitivity of the EPG xml. If nothing else you confirmed what I thought and where I needed to look and thanks to your input, it is now...
Pleased to say that I have solved this, and believe it or not, it was a fault with the recording pin control on the xml which had...
Evening all, I am having a little bit of bother skinning the EPG. The specific issue is the border highlight. It shows on all the...
Replies
6
Views
1K
I completely uninstalled MP1 and installed MP2. Audio is now good. I'm relieved, and I suppose a little glad to have been forced to make the switch, because I'm already liking MP2 more. But still, the original problem remains a frustrating mystery.
I completely uninstalled MP1 and installed MP2. Audio is now good. I'm relieved, and I suppose a little glad to have been forced...
I am running 1.29 Pre-release on Windows 10 Pro. I use MP only to watch TV through my Hauppauge tuner card. I am suddenly getting...
Replies
13
Views
3K
Better MediaPortal 1.29 Pre-Release - MEDIAPORTAL
Better MediaPortal 1.29 Pre-Release - MEDIAPORTAL
MePo 1.27 will not import Clickfinder. And by do it manually the TV Server configuration section will crash. The Clickfinder...
Replies
4
Views
2K
Many people found the Lentoid decoder better optimised than LAV for software decoding. If you want to try it, download it from the link below, run reg.bat as an admin to install it and change the HEVC Video settings in MediaPortal Configuration/Codecs and Renderer...
Many people found the Lentoid decoder better optimised than LAV for software decoding. If you want to try it, download it from the...
For some unknown reason I can't play HEVC encoded video with MP1 on my system. I have tried every trick I know, but nothing works...
Replies
10
Views
3K
Aren't there any developers of test group people here that know something about radio streams?? Or is my problem posted in the wrong place?
Aren't there any developers of test group people here that know something about radio streams?? Or is my problem posted in the...
I have two local radio streams defined, both of which have played reliably for years. Suddenly one of them won't play with the...
Replies
7
Views
1K
In gathering logs for my radio stream problem, I noticed that I had hundreds of ts_reader and ts_writer files - apparently a new one every time MP starts (which is every day at 5am). This has the look of some long forgotten debug effort. Any clue how to stop this as this point (other than command file delete before startup)? No...
In gathering logs for my radio stream problem, I noticed that I had hundreds of ts_reader and ts_writer files - apparently a new...
In gathering logs for my radio stream problem, I noticed that I had hundreds of ts_reader and ts_writer files - apparently a new...
Replies
0
Views
844
The Microsoft Antimalware Service Executable got updated on July 9 (version 4.18.2106.6-0) and it seems to me that this update fixed the issue with MediaPortal. The CPU load of the antimalware service is near 0% even if the MediaPortal application is running.
The Microsoft Antimalware Service Executable got updated on July 9 (version 4.18.2106.6-0) and it seems to me that this update...
I've been using MP1 on a dedicated HTPC for some years now, but recently I'm struggling the software to work. Whenever MP1 runs...
Replies
4
Views
2K
Just about done! Most things are reinstated. A few issues with my Fanart, but I think that may be waiting for the scraper in FanartHandler to pick them up again from the old thumbs. Time will tell. I have moved all of my files on to a larger HDD and reduced the number that I had from two to one, so if it was a power supply issue...
Just about done! Most things are reinstated. A few issues with my Fanart, but I think that may be waiting for the scraper in...
Over the past few days MP has become a bit unstable and I have noted an error when exiting MP Configuration. The logs don't give...
Replies
9
Views
1K
Hello to all, as requested by doskabouter I created the log and before posting it, I went through and one line caught my attention, apparently my music database had a problem. So I deleted (rename) and recreated the database, as I have a lot of tracks in my collection (+/- 90000 songs) I hate do do this because it's very longer but...
Hello to all, as requested by doskabouter I created the log and before posting it, I went through and one line caught my attention...
Hello to all I have been using MP for many years and my system had become +/- unstable, it was time to refresh it. So I...
Replies
4
Views
2K
Well, or somehow find it in the Media Portal, and then with your eyes in the folder ... -- Tapatalk | WBR, ajs
Well, or somehow find it in the Media Portal, and then with your eyes in the folder ... -- Tapatalk | WBR, ajs
Hello, who knows how to determine the folder thumb file name e. g. 1712997069L.jpg to a particular folder? Apparently a hash is...
Replies
3
Views
1K
Could be that a sudden powercut corrupts the database, or give all your pcs a new ipadres, or several more things that can break up a running mediaportal setup. Without the logs however, I don't have a clue on what exactly is wrong...
Could be that a sudden powercut corrupts the database, or give all your pcs a new ipadres, or several more things that can break up...
Hi there, I'm a happy long time user and am currently using MP 1.25. Up until now I had no issues with my setup. Yesterday...
Replies
1
Views
1K
Hi @joecrow, Thank you, I did uninstall MYSQL, LAV and deleted the respective folders in ProgramData, then re-installed MP1.27 and hurrah I've set up the TV side of things and live TV and recordings are working. Thank you and @joEhSuper for your help, I really do appreciate it, now I just need to set up all the plugins again :-)
Hi @joecrow, Thank you, I did uninstall MYSQL, LAV and deleted the respective folders in ProgramData, then re-installed MP1.27...
After a short break away from Mediaportal, I installed MP1.27 and have the TV Server on a different computer to the client. I...
Replies
5
Views
1K
Ops. I disabled the Skin Translations plugin. That's all it was. :ROFLMAO:
Ops. I disabled the Skin Translations plugin. That's all it was. :ROFLMAO:
So I was stripping away some unused plugins from Mediaportal. Not sure exactly what change caused it exactly, but now instead of...
Replies
1
Views
845
Hi doskabouter I only use the line jump for the description. I modify the XmlTV file from EPG-Buddy with WebGrabPlus (rex) only in the description with \n. My new description is: Genre, year of production \n Original description \n Actors
Hi doskabouter I only use the line jump for the description. I modify the XmlTV file from EPG-Buddy with WebGrabPlus (rex) only...
Just installed 1.28, and the new XML EPG importer refuses to import the xml spit out by EPG-Buddy. Older versions of MP1 ingest it...
Replies
23
Views
4K
Greetings.... I've been trying to set up mp2 server. I am able to scan for channels but I can't preview them it's saying no signal. On both red and green channels. There r 3 cards installed so over all I have 6 tuners. All of them r scanning but none playing. I'll be back in 9 hours.
Greetings.... I've been trying to set up mp2 server. I am able to scan for channels but I can't preview them it's saying no signal...
Greetings.... I've been trying to set up mp2 server. I am able to scan for channels but I can't preview them it's saying no signal...
Replies
0
Views
779
Hello again ... The HTPC, so the Power Scheduler, will wake up not to the correct time. So, if 20:15 is the beginning of the TV Recording, he has to record 8 Minutes pre and to wake up 7 minutes pre to do this. But je wake up at 20:15 and start to record after the installed 8 minutes ... . So the first 8 Minutes are lost! The times...
Hello again ... The HTPC, so the Power Scheduler, will wake up not to the correct time. So, if 20:15 is the beginning of the TV...
I've set it like my other HTPC: But it will not go to sleep in Homescreen. What is wrong? With "START"...
Replies
15
Views
2K
P.S. - Strangely, the TV Server my single seat setup (1.27 on a modest machine running Windows 10 Pro x64) is working from my office machine MP client. Same exact network, firewall, Defender settings. It's a slightly older version of Win 10 though - I haven't updated to 20Hx on it yet. Maybe I shouldn't (or maybe I should image it...
P.S. - Strangely, the TV Server my single seat setup (1.27 on a modest machine running Windows 10 Pro x64) is working from my...
Let me start by asking if anyone has TV Server running PROPERLY on a Windows 10 machine, and if so are you using RTSP or UNC share...
Replies
9
Views
2K
I still don't know how to expose the problem I have with the audio reproduction. It seems not to appear in the bug reports. I will keep trying to find a solution. Thanks for the time.
I still don't know how to expose the problem I have with the audio reproduction. It seems not to appear in the bug reports. I will...
I don't know if this is a system, software or plugin issue. I've been trying to catch it for some time, at least the last 2...
Replies
9
Views
2K
When using the internal Blu-ray Player the subtitles appear too early. No matter if I play the movie/series using the menu or picking the stream from the MP menu. When the internal Blu-ray Player is off, the subtitles appear correctly. Has anyone a suggestion how to fix that? Thanks in advance. Gesendet von meinem BlackBerry KEYone...
When using the internal Blu-ray Player the subtitles appear too early. No matter if I play the movie/series using the menu or...
When using the internal Blu-ray Player the subtitles appear too early. No matter if I play the movie/series using the menu or...
Replies
0
Views
581
Don't worry, some guys understand this also in french ;) BTW, you also have a french forum, if you need. Happy to see that you fixed your problem.
Don't worry, some guys understand this also in french ;) BTW, you also have a french forum, if you need. Happy to see that you...
Hello to all I have a problem, my Mediaportal doesn't start anymore, there was a power cut while I was shutting down my PC and...
Replies
2
Views
1K
Withdrawing this question as I've decided to change hardware. Thanks anyway for your help.
Withdrawing this question as I've decided to change hardware. Thanks anyway for your help.
Hi there, I've been using MP1 for a few years without issues. In December I bought a new TBS card (6910) with CI interface. I...
Replies
3
Views
1K
I have just tested the dll, and it works fine on my thpc too :)(y) Thanks
I have just tested the dll, and it works fine on my thpc too :)(y) Thanks
Since the update to MediaPortal 1.27 it takes about three seconds to jump to the next or previous track. Also adding files and...
Replies
11
Views
3K
Today I did send a reminder to DD, since 09-2020 no news from them about new drivers. 3.0.2.211 x64 seems to work for me to, but DD told me, those where beta drivers, and some cards did have problems with them. Here you can find stable older drivers, Digital Devices Store But 3.0.3.224 did not work for me, so the latest stable...
Today I did send a reminder to DD, since 09-2020 no news from them about new drivers. 3.0.2.211 x64 seems to work for me to, but...
I recently upgraded my somewhat ancient 1.16 installation to the latest version, 1.25, and have a couple of problems, but the most...
Replies
16
Views
6K
Yes, kicked in and updated several items this morning.:)
Yes, kicked in and updated several items this morning.:)
I know there have been problems with the TVDB api and for me both Moving Pictures and MP-TV Series plugins are no longer working in...
Replies
2
Views
885
"Sometimes" when I am playing a playlist with the TV on I notice that the screen becomes frozen. The on screen playlist doesn't show the songs advancing through the list. i.e. the currently playing song doesn't match the name of the on screen song. MP still plays the playlist ok but the screen just stops showing the correct song...
"Sometimes" when I am playing a playlist with the TV on I notice that the screen becomes frozen. The on screen playlist doesn't...
"Sometimes" when I am playing a playlist with the TV on I notice that the screen becomes frozen. The on screen playlist doesn't...
Replies
0
Views
991
MP1 MP2 TV Service stopped unexpectedly (1 Viewer) DE
Hi CyberSimian I've tried not using WebEPG at all for a few days and can confirm what you said: that broadcast EPG retrieves 7 days at a time in the UK by default. I have had no issues at all using DVB EPG this way, retrieving the EPG when the system is idle.. I think I am going to stick with doing things this way and expect...
Hi CyberSimian I've tried not using WebEPG at all for a few days and can confirm what you said: that broadcast EPG retrieves 7...
The TV Service on my MediaPortal server machine stopped unexpectedly and generated the attached log. Can someone please explain...
Replies
24
Views
3K
MP1 MP2 Guide doesn't show (1 Viewer) DE
I figured out my issue. Found this post and adding a group for radio channels fixed my problem too. https://forum.team-mediaportal.com/threads/tv-guide-label-missing.99465/
I figured out my issue. Found this post and adding a group for radio channels fixed my problem too...
Hi, I'm hoping someone can help me figure out what is happening here. When i try to open the guide it doesn't load. I get a screen...
Replies
2
Views
1K
Thanks for the advice. Before trying it, I think i will try the slightly less drastic approach which mm recommended for the new message in this post. Wish me luck!
Thanks for the advice. Before trying it, I think i will try the slightly less drastic approach which mm recommended for the new...
For several days now, none of my scheduled tv recordings have been made, but there are no errors in the logs. NO channels are...
Replies
7
Views
2K
Sorry for the late response. In my experience, the EPG grabbing of a single transponder takes 2 to 3 minutes. Afterwards it takes 1 to 2 minutes to write the data to disk. To speed up the EPG stuff (not only writing but also reading the EPG guide in MediaPortal), I changed the program table (and only that table) from InnoDB to...
Sorry for the late response. In my experience, the EPG grabbing of a single transponder takes 2 to 3 minutes. Afterwards it takes...
I get a few "Continuity error..." after the EPG scan finished: [2021-01-30 18:56:10,278] [4c45530] [18c8] - mhw reset [2021-01-30...
Replies
2
Views
2K
OK, @CyberSimian jogged my memory :) I remembered that something similar has happened to me before, back in 2017. So I searched back through previous posts and found the solution. I just knocked up a very rough document that describes the problem, symptoms & solution for anyone else that is interested in the future. It's attached to...
OK, @CyberSimian jogged my memory :) I remembered that something similar has happened to me before, back in 2017. So I searched...
Hi folks, Was running MePo 1.25 without issue. Installed latest Windows 10 updates, now MePo won't start, at all, it does not even...
Replies
5
Views
2K
Top Bottom