I'll give that a try & Report back just looking deeper & found that the Medion card is the quad version & MP detects 4 cards (Other pc is running XP) This card (The Creatix one) only has 1 tuner in it (& This pc runs vista :growl: ) so should be interesting to see what happens. they both appear to be very different cards even though...
I'll give that a try & Report back just looking deeper & found that the Medion card is the quad version & MP detects 4 cards (Other...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
I puchased a Medion computer (ALDI) version, running Windows Vista Home Premium that came in shipped with an X10 remote. I installed MP on the machine (sure beats the MCE that was included in the Vista system) but one of the problems I had, which was also visible from other users using this remote was that it would either not work, or...
I puchased a Medion computer (ALDI) version, running Windows Vista Home Premium that came in shipped with an X10 remote. I...
He guys,
can someone tell me which "action i have to use to map a remote key to what useually the keyboard key "x" does.
I...
Diagonal banding is an indicator of interferrence, so this could also be a cause of your fluctuating Signal Quality, and thus the stuttering.... :?
Yes, that would be a good way to determmine if your splitter is the cause. But, I doubt that it is, unless it has a poor, or broken, connection inside it?
It sounds to me like the...
Diagonal banding is an indicator of interferrence, so this could also be a cause of your fluctuating Signal Quality, and thus the...
Hi,
I am using a two-way splitter to split the digital cable tv signal into my 2 DVB-C tuners. When looking the TS capture...
I don't think very highly of the dvico cards. They are pretty expensive and don't properly have BDA support.
Glad that yours is working now. My dVico dual tuner card is sitting in its box waiting to be returned.
If you need a good recommendation for a tv card in Australia, check out http://www.digitalnow.com.au/.
Their dual PCI...
I don't think very highly of the dvico cards. They are pretty expensive and don't properly have BDA support.
Glad that yours is...
I am looking at buying this card for my MediaPortal setup. I know it is not in the support TV card list...
Yes, it works! Thank you very much Alex. But it's very slow. Video is delayed about 10s after audio (cpu Athlon 3k is on 30% only) and fullscreen doesn't work - so useless :-(
Yes, it works! Thank you very much Alex. But it's very slow. Video is delayed about 10s after audio (cpu Athlon 3k is on 30% only)...
Hello
I have created Definition for AVerMedia AVerTV 203. Will be used software encoders from AVerTV program available on Aver...
The hack in this thread had nothing to do with remote handling in MP.
If your remote does not work in 1.1.0 BETA 1, then start a _proper_ bugreport thread in the correct forum.
It does work for all our team members.
The hack in this thread had nothing to do with remote handling in MP.
If your remote does not work in 1.1.0 BETA 1, then start a...
This fix isn´t needed anymore for MediaPortal 1.1.0 Alpha and following builds!
As many observed there are some problems with the...
I know this is an old thread, but I ask anyway.
How do I make my own area dvb file for Program Files\Team MediaPortal\MediaPortal\TuningParameters folder?
My homecountry is Finland
I know this is an old thread, but I ask anyway.
How do I make my own area dvb file for Program Files\Team...
Hello,
I have some problems with the Anysee E30 C Plus DVB-C device. I install newest drivers for this USB device but i get the...
Hi Guys,
I'm using mepo 1.1.2 for which this is built in. I have activated the Mptray but when i press the green button.........nothing. I'm using this on Win 7 Home Premium with Media Centre disabled.
What am I doing wrong??
Hi Guys,
I'm using mepo 1.1.2 for which this is built in. I have activated the Mptray but when i press the green...
I'm not sure if I posted this in the right place or not...
I've searched the forums the past couple of days and I'm having...
If you can get your card to autotune, disable EPG grabbing and Timeshifting. It might work then. I use a VBox DTA-150 and I can view ATSC channels. I jsut can't timeshift or record them yet. If you haven't already figure dit out, ATSC support for MP is very problematic due to the lack of developers and testers. It's a North American...
If you can get your card to autotune, disable EPG grabbing and Timeshifting. It might work then. I use a VBox DTA-150 and I can...
Area: Media Portal Program
Skin: blue two
MP Version: .1.3.0 (latest CVS - 8-8-05)
Windows Version: XP PRO SP2
CPU Type...
hi,
there is/are one or two checkboxes to tick in Project64. That should be located under the Option tab in the General configuration window. Can't remember the actual name of this/these option/s but it should be something sounding similar to "open rom and start emulation", "start fullscreen" or "start emulation fullscreen"...
hi,
there is/are one or two checkboxes to tick in Project64. That should be located under the Option tab in the General...
hi u, can someone please help me? i have project64 and znes installed in media portal. znes works fine starts the rom automaticall...
According to the information on Sony's web site:-
"3 LCD Technology Grand WEGA incorporates three wide XGA high-resolution LCD panels"
which implies that the native resolution is 1280x720 - WXGA.
In that case, setting the output of the video card to 720p would be ideal.
As I said earlier, I get perfect stutter-free HDTV...
According to the information on Sony's web site:-
"3 LCD Technology Grand WEGA incorporates three wide XGA high-resolution LCD...
I am having problems playing back ts / hdtv files on Media portal which runs fine on Windows Media Player 10 with video mixing...
Actually, I have the Pinnacle Dual DVB-T Pro PCI card which, I think, is technically the 2000i card. But I think it is so similar that it can almost be the same.
I installed the Pinnacle software which set up the remote (amongst other things) and the profiles.ini file. It is from this that I copied the extra bits:-...
Actually, I have the Pinnacle Dual DVB-T Pro PCI card which, I think, is technically the 2000i card. But I think it is so similar...
Hi,
I have the Pinnacle MediaCenter 100i with this remote
http://www.atlastsolutions.biz/disks/images/PCTV-60e-WithRemote2.jpg...
ok got it now, instaed of doing the shelling manually i used autosheller from gamerx, i think it had something to do with disabling the sound scheme which i had previously done but for some reason had reset and was active again, now to solve the logon request....
ok got it now, instaed of doing the shelling manually i used autosheller from gamerx, i think it had something to do with disabling...
I almost got the HTPC to look totally dedicated. All that is left from windows xp now is the "Applying your personal settings..."...
For some reason I am not getting any graphs listed when I "- in graphedit: File->Connect to Remote Graph".
When MS Media Centre is running I get grey boxes but no orange ones.
When I run Beyond TV there are no graphs shown in the box. The same when Sage TV is running. I've tried both overlay and PMR9 settings for Sage...
For some reason I am not getting any graphs listed when I "- in graphedit: File->Connect to Remote Graph".
When MS Media...
Aaaargh!
I nearly went nuts trying to get MP working on my system and finally decided to reformat and reinstall Windows in hopes...
I have the same CPU figures on roughly comparable hardware. The GUI technology from MP is the same as in a 3D game. That's dandy for heavy animations, but a bit overkill for nearly static screens. So it's the nature of MP to use a lot of CPU. If you do not experience sluggishness, it does not have to be a big problem. If MP is high on...
I have the same CPU figures on roughly comparable hardware. The GUI technology from MP is the same as in a 3D game. That's dandy...
As soon as I open mediaportal my CPU usage jumpos to 25-35% even when just left at idle on the first screen. This causes the skin...
Hey guys,
i've been struggeling with this shit for years for all the differnet reasons you mentioned above.
Right now I seem to have fixed it by disabling epg grabbing but we will see...
I noticed one thing while fiddeling with it. I had seen my one card dedicated to epg grabbing shown highlighted in red in the manual control window...
Hey guys,
i've been struggeling with this shit for years for all the differnet reasons you mentioned above.
Right now I seem to...
Hi
I have media portal 1.5 (windows 7), the system has been running ok until recently, basically the PC wont go to standby, I...
So here are the logs, thank you for the help.
So suddenly it works even with my language set as "Region". Ive just rolled back from the USA to my language. Previously it didnt work with my language just with "region" set to the "USA" (or probably to another english language).
What has changed is maybe installed (but not used) my...
So here are the logs, thank you for the help.
So suddenly it works even with my language set as "Region". Ive just rolled back...
Hi,
pleae, how is it with the IMDB support for Mediaportal 1? Is it completely gone? It wasn't working many months recently, now...
Hi Dimka,
Yes, you are right. The world is small and Denmark very small indeed. Funny that you live here in town. We just moved to a brand new house in Ullerødbyen from an apartment in the center of the town. We might even share acquaintances as we know several Danish-Russian and Russian-Russian couples from around here.
Best...
Hi Dimka,
Yes, you are right. The world is small and Denmark very small indeed. Funny that you live here in town. We just moved to...
Hi,
I used to watch TV through MP using a special 3rd party plugin that used VLC to playback to stream content from my IPTV...
I know this old, but it fixed the same issue was having in version 1.11 after a hard lockup on my computer. First time this has happened to me in the 9 years I've been running MP.
I think it was mentioned earlier, but I will again. At least in Windows 8 the desired folders are now under "C:\ProgramData\Team MediaPortal\"
I know this old, but it fixed the same issue was having in version 1.11 after a hard lockup on my computer. First time this has...
MediaPortal Version: 1.1.2 (upgrading to 1.1.3
MediaPortal Skin: Streamed MP
Windows Version: Win 7 32bit
1. TV Card: Nova T 500...
My Capturecarddefinitions Changes for 330e dvbt
I've added this to the capturecarddefinitions.xml to make it work:
<capturecard commercialname="Pinnacle PCTV 330e" capturename="PCTV 330e/800e BDA Capture" devid="vid_2304&pid_0226">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"/>...
My Capturecarddefinitions Changes for 330e dvbt
I've added this to the capturecarddefinitions.xml to make it work:
<capturecard...
MediaPortal Version: 0.2.2.0
MediaPortal Skin:
Windows Version: XP Prof
CPU Type: core 1,66
HDD: seagate
Memory: 1 gb...
Thanks guys...
However, I'm using a swedish version of Windows, so I can't install that update because it's a different language (I get an error message when I try to do it). Can I get the swedish update anywhere?:(
Edit:
Oh well, got SP3 and now it's working! Thanks guys!
Thanks guys...
However, I'm using a swedish version of Windows, so I can't install that update because it's a different language...
TV-Server Version:
MediaPortal Version: 1.0.0.0 RC2
MediaPortal Skin: Default
Windows Version: XP Pro SP2
CPU Type: AMD X2...
It seems that the second tuner to be used for another LNB, meaning you can also receive signals from a wide source,included satellite!But for the last version,you must have duo support for two LNB for different satellites.
Or probably the second tuner is for receiving terrestrial signal.Because I don't have this DVB-S2 card,I'm not sure.
It seems that the second tuner to be used for another LNB, meaning you can also receive signals from a wide source,included...
Hi Guys,
I'm thinking of adding an additional card so I can get Freesat and the HD Channels. I already have a Sky box setup next...
my answer to the Question of the topic:
no, you don´t need it really, if your nVidia 7300 can DXVA (afaik it can). Just grab the MPC-HC codec with MPC-HC subtitle engine.
my answer to the Question of the topic:
no, you don´t need it really, if your nVidia 7300 can DXVA (afaik it can). Just grab the...
Hi guys i'd like to start by saying exellent software and great forums.
Now my question ... I have stuck windows 7 on my old...