Post problems you have when using MediaPortal,
or pre installation questions in here.
It was the rubber in gimp;)
Conclusion: We need to provide as much as possible informations in the database. How they get used is your decision. I will find my way :cool:
It was the rubber in gimp;)
Conclusion: We need to provide as much as possible informations in the database. How they get used is...
Using MediaPort 8 on Windows 7. For the guide I am following the instructions here for configuring MC2XML and XMLTV. The guid is...
Hi all,
I'm experiencing a weird behaviour of the xmltv-importer:
It just happens to quit unexpectedly, the error-message is unfortunately not meaningful (at least not for me)
Someone's got a clue? I do know which part is corrupted (my tvguide is merged from several files) but it looks
ok - and validates...
And now - at...
Hi all,
I'm experiencing a weird behaviour of the xmltv-importer:
It just happens to quit unexpectedly, the error-message is...
Hi all,
I'm experiencing a weird behaviour of the xmltv-importer:
It just happens to quit unexpectedly, the error-message is...
Glith, I noticed this too.
Glith, I noticed this too.
Area: Media Portal Program
MP Version: 0.2.0.0 RC4
Skin: BlueTwo
Windows Version: Windows XP SP2
CPU Type: Intel 2.8
Memory...
Woah,
I'll give that a go.
Talk about complicated!
Cheers.
Woah,
I'll give that a go.
Talk about complicated!
Cheers.
TV-Server Version: 1.0 RC1
MediaPortal Version: 1.0 RC1
MediaPortal Skin: bluetwowide
Windows Version: VISTA SP1
CPU Type...
How do you get the files from the GUI into tvserver ? the files aren't the right naming convention and dont have the dtd file ?
Ok found out how to get it saved as tvguide.xml - how do you get the dtd file ?
Doh - sorted now !!!
xmltv gui is much faster than the command line version - can't believe how much faster it is !!!
How do you get the files from the GUI into tvserver ? the files aren't the right naming convention and dont have the dtd file ...
TV-Server Version: MP1 RC1 + svn 19228
MediaPortal Version: MP1 RC1 + svn 19228
MediaPortal Skin: Indigo
Windows Version: Windows...
hi
used robbo100 guide and setup mp very well. used xmltv for epg grabbing and it had worked fine for months but noe its not auto updating. it did work fine but now says it had a problem connecting to remote server. i have to keep doing the updates manually.
anyone got any ideas
hi
used robbo100 guide and setup mp very well. used xmltv for epg grabbing and it had worked fine for months but noe its not auto...
hi
used robbo100 guide and setup mp very well. used xmltv for epg grabbing and it had worked fine for months but noe its not auto...
Hi,
there is an import function in video database config screen in this manual page:
Video Database 1.2.0 - MediaPortal Wiki
Where can I find the xml template for this function?
thx
Hi,
there is an import function in video database config screen in this manual page:
Video Database 1.2.0 - MediaPortal Wiki...
Hi,
there is an import function in video database config screen in this manual page:
Video Database 1.2.0 - MediaPortal Wiki...
I’m looking for some help regarding a MP TV Server XML problem.
I recently updated MP1.5 to 1.6 and had some problems after the update (not worth getting into here). The result is that I then performed a clean install to start over from scratch. The clean install fails to see all but 3 of our previously recorded TV shows. It will...
I’m looking for some help regarding a MP TV Server XML problem.
I recently updated MP1.5 to 1.6 and had some problems after the...
I’m looking for some help regarding a MP TV Server XML problem.
I recently updated MP1.5 to 1.6 and had some problems after the...
TV-Server Version: 1.1
MediaPortal Version: 1.1
MediaPortal Skin: Default
Windows Version: Vista SP1
On start up media portal tvclient crashes with an error
System.Configuration.ConfigurationErrorsException: Root element is missing. (C:\Program Files\Team MediaPortal\MediaPortal\MediaPortal.exe.config) --->...
TV-Server Version: 1.1
MediaPortal Version: 1.1
MediaPortal Skin: Default
Windows Version: Vista SP1
On start up media portal...
TV-Server Version: 1.1
MediaPortal Version: 1.1
MediaPortal Skin: Default
Windows Version: Vista SP1
On start up media portal...
There was a plug-in for a short while and then it disappeared. I would be interested to see a plug-in for XMRadio. I know that MCE has an XMRadio component which would be nice for MP.
Anybody interested in coding a plug-in for XM???
There was a plug-in for a short while and then it disappeared. I would be interested to see a plug-in for XMRadio. I know that MCE...
Has anyone found a new plugin for this yet?
i've searched out the forums but come up empty handed.
I have the latest version of...
Read a review on the v3xt card and it performed horribly in dvd / divx playback, I think it was a 6200 it was compared with and lost all tests.
Read a review on the v3xt card and it performed horribly in dvd / divx playback, I think it was a 6200 it was compared with and...
Hi,
i m searching for a very cheap graphiccard which is fully supported by MP.
On ebay i found several cards with the XGI...
seems to be working after the fix..:)
seems to be working after the fix..:)
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-04-18)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
Hi
I'm not sure whether this goes in the skins forum, plug-ins forum or here so apologies if I have it wrong.
I'm using the xface skin and when I try and launch youtube.fm I get an error saying Missing or Invalid file: C:\Program Files\Team M...\Skin\xface\youtubevideosbase.xml.
I then have to restart the PC to get out of it...
Hi
I'm not sure whether this goes in the skins forum, plug-ins forum or here so apologies if I have it wrong.
I'm using the...
Hi
I'm not sure whether this goes in the skins forum, plug-ins forum or here so apologies if I have it wrong.
I'm using the...
me too :wink:
me too :wink:
hI i'M A NEWBIE FOR THIS GREAT PRODUCT.
I installed the latest release RC3 and also the latest xcard drivers (not that new) ...
nope
Sorry mate, didn't have any luck (like you only the basic buttons work on XP). Tried a few different remote plugin's but no good. Ended up using the remote on Vista MC where all buttons work ok. :(
nope
Sorry mate, didn't have any luck (like you only the basic buttons work on XP). Tried a few different remote plugin's but no...
MediaPortal Version: 1.0
Windows Version: xp sp3
Remote: xc-4889
Hi guys,
I have just purchased a Digitech WMC Remote...
Is it possible to use both to controle MediaPortal?
How?
Is it possible to use both to controle MediaPortal?
How?
Is it possible to use both to controle MediaPortal?
How?
MCE Remove/Receiver
Ok - my MediaCenter remote showed up from RadioShack. I couldn't get XP Home to find any drivers, but after getting them from MP's site all was well.
The remote did activate my XBOX360, which might be an issue... And I haven't had a chance to then see if the 360 remote works with the MCE receiver.
The...
MCE Remove/Receiver
Ok - my MediaCenter remote showed up from RadioShack. I couldn't get XP Home to find any drivers, but after...
If my laptop has an IR reader/port on the front - will an XBOX 360 remote work with MediaPortal?
With the list of plugins I still have to work out which are the default ones and which are not.
With the list of plugins I still have to work out which are the default ones and which are not.
Trying to use the new controller support in 1.12. with a wired xbox360 controller.
Works except using the dpad always skips menu...
got it sorted i needed to configure it in the remote configeration page
got it sorted i needed to configure it in the remote configeration page
hello guys first up what a great program im lovin it
ok my problem is today i upgraded from MediaPortal 0.2.2.0 to MediaPortal...
Finally got this working. You need to edit your registry, from a MS Dev's blog:
Set Remote Control ID - To enable your Media Center to respond to a specific remote control ID do the following; 1. Press and hold the DVD Menu key on the remote then press a number button (1-8) for 5 seconds. Remotes with visible LED signal indicators...
Finally got this working. You need to edit your registry, from a MS Dev's blog:
Set Remote Control ID - To enable your Media...
Just wondering if the Xbox 360 Universal Remote will work as a Microsoft MCE Remote replacement? I have an existing MCE remote and...
For external players you can use Eventghost.
For external players you can use Eventghost.
Guys,
A long time ago, I bought the HD-DVD Add-On Drive for my XBOX 360. It came with an XBOX 360 Universal Media Remote...
I haven't downloaded Portal yet, but just wondering...will this work with XBOX 360 to play videos from my PC. I have XP SP3, and I am having issues with videos showing up on my 360 from my pc and was wondering if this program will work for that.
I haven't downloaded Portal yet, but just wondering...will this work with XBOX 360 to play videos from my PC. I have XP SP3, and I...
I haven't downloaded Portal yet, but just wondering...will this work with XBOX 360 to play videos from my PC. I have XP SP3, and I...
I am getting a new computer setup in the next few weeks and I am going to be using my two tv capture cards. However, this time I want to have a remore control that works. I have an XBox 360 with the universal remote control. To my knowledge this is basically a Media Center remote. I am wondering if there is a way for me to use...
I am getting a new computer setup in the next few weeks and I am going to be using my two tv capture cards. However, this time I...
I am getting a new computer setup in the next few weeks and I am going to be using my two tv capture cards. However, this time I...
Just to let anyone know!
I use it on MP 1.1.0. rc4 and it works great!
In order to get the buttons 1-9 working, you only need to replace the key codes in the "XBox Remote.xml" file with these values =>
<button name="1" code="206">
<button name="2" code="205">
<button name="3" code="204">
<button name="4" code="203">
<button name="5"...
Just to let anyone know!
I use it on MP 1.1.0. rc4 and it works great!
In order to get the buttons 1-9 working, you only need to...
Anyone know if this plugin still works for the original Xbox Remote and the latest MP? I see the plugin was created in 2007. I...
Nvm it work now [bought s-video to s-video cable], but it detect as tv can have my monitor resolution so problem is in clonick i see ony top left picture and need to scroll it, when i set it down to 800*600 i can use it without problem, can i set tv as my secondary screen so i can set it different resolution etc.?
Another problem...
Nvm it work now [bought s-video to s-video cable], but it detect as tv can have my monitor resolution so problem is in clonick i...
I have acer ferrari 4000 laptop with x700 mobility radeon and svideo output
i have connected tv to it (laptop svideo port > svideo...
No solution yet
Hi,
I've been googling for long time and AFAIK there's no solution yet. And I'm afraid that there won't be any solution as Vista x64 is already here.
Best Regards
No solution yet
Hi,
I've been googling for long time and AFAIK there's no solution yet. And I'm afraid that there won't be any...
Hi,
I am on a Windows XP 64 box w/ the latest Media Portal. I recently bought a Microsoft remote that hooks upto an 'eHome...
What codec are installed? we really need more info to help,...
What codec are installed? we really need more info to help,...
I can play back x264 files easily using vlc or wmp, but when I play the same files in Media Portal, the picture is scrambled. I...
I installed Haali Media Splitter for DirectShow Filter and then CoreAVC to decode. You can also use FFDShow for decoding as well.
Wiki for codecs here
First step would be to make sure it works in Windows Media Player, then Mediaportal
I installed Haali Media Splitter for DirectShow Filter and then CoreAVC to decode. You can also use FFDShow for decoding as well...
Hi!
Can someone describe to me how to get x264 videos to play on MediaPortal on a clean winXP install. What codecs and...
Hey guys,
I am currently trying to locate a problem with my X10-Remote thats driving me crazy: After a few operations, mainly after stopping a video file, my X10 (Medion Model) stops reacting in MP. Mouse still works, so MP doesnt hang. Girder works still too, so reception is fine. I tested with different skin, different drivers...
Hey guys,
I am currently trying to locate a problem with my X10-Remote thats driving me crazy: After a few operations, mainly...
Hey guys,
I am currently trying to locate a problem with my X10-Remote thats driving me crazy: After a few operations, mainly...
Ups. I am sorry, misunderstanding :-)
Ups. I am sorry, misunderstanding :-)
This has nothing to do with Media-Portal itself...
Windows Version: XP Pro SP2 german
CPU Type: Athlon XP 2000+
HDD: 80 GB IBM...