Improvement Suggestions (21 Viewers)

You have an idea how MediaPortal could be improved? Post it in here.
  • Locked
  • Sticky
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a template which shows all required informations you have to add to your Improvement Suggestion Thread. note: Add as much informations as possible. You can always update your first post How it...
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a...
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a...
Replies
0
Views
13K
arf, i mean to have generic toggle, and managed by pluginame ?
arf, i mean to have generic toggle, and managed by pluginame ?
I want to propose an extra setting in the Dynamic refresh rate, and I'd appreciate it if you give a little bit of feedback here...
Replies
24
Views
503
Long press can be more easy to do. (at least i think) Envoyé de mon LG-H870S en utilisant Tapatalk
Long press can be more easy to do. (at least i think) Envoyé de mon LG-H870S en utilisant Tapatalk
When a music track is played and the skip backward button is pressed, MediaPortal plays the previous track from the playlist. It...
Replies
21
Views
415
Started on: 2020-03-22 last update: 2020-03-22 Summary: Add a checkbox for adding IPTV channels without checking signal level and signal quality. Area: TV Server, DVB-IP Mediaportal IPTV Source filter Description: If you use IPTV channels, it is good to update them once or twice a month to make all channels work well. But the...
Started on: 2020-03-22 last update: 2020-03-22 Summary: Add a checkbox for adding IPTV channels without checking signal level and...
Started on: 2020-03-22 last update: 2020-03-22 Summary: Add a checkbox for adding IPTV channels without checking signal level and...
Replies
0
Views
304
Regeszter was working on DVBScanUtilPlugin to a perform automatic scans, the source code is available on GitHub.
Regeszter was working on DVBScanUtilPlugin to a perform automatic scans, the source code is available on GitHub.
Started on: 2020-03-19 last update: 2020-03-19 Summary: FreeView AV systems embedded in TV sets and FreeView boxes automatically...
Replies
1
Views
214
I have extended the code to filter out channels with a channel number of 10000. I think this is the number used if channel details retrieval fails. Improvements were seen, but is this the right thing to do ?
I have extended the code to filter out channels with a channel number of 10000. I think this is the number used if channel details...
Started on: 2020-03-16 last update: 2020-06-30 Summary: When multiple FreeView Transmitters are available in a single area, you...
Replies
103
Views
3K
LOL, history ! :) Few months ago, I had restarted from scratch, for testing differents things. It's time consuming but finally, at the end, a clean MP.xml, TVE settings up to date and, without older things (and more if you test or dev many things)... the gain is appreciable, MP seems to work better. ;)
LOL, history ! :) Few months ago, I had restarted from scratch, for testing differents things. It's time consuming but finally, at...
My config with 8 tuner cards : Settings with EPG grabbing when TS or record (doesn't work) : Settings for using a specific...
Replies
49
Views
2K
Instead of having to go back to the Basic Home when you listen to music and want to watch a TV-Series episode, why not allow users to map their favourite plugins to buttons on their remote? Example: I play a track from Music. To get to the TV Show I want to see, I have to press the Home button, then browse the menu to the plugin...
Instead of having to go back to the Basic Home when you listen to music and want to watch a TV-Series episode, why not allow users...
Instead of having to go back to the Basic Home when you listen to music and want to watch a TV-Series episode, why not allow users...
Replies
0
Views
227
Hi, Is it possible to add specific and separate entries for Dolby and DTS in Codecs and Renderer => Video Codecs => Settings Decoder? So you can use separately Dolby Atmos and DTS X (from Windows 10 market) without problems. At the moment AC3 is with MPEG and there is no entry for DTS. It would be nice if you could also add the...
Hi, Is it possible to add specific and separate entries for Dolby and DTS in Codecs and Renderer => Video Codecs => Settings...
Hi, Is it possible to add specific and separate entries for Dolby and DTS in Codecs and Renderer => Video Codecs => Settings...
Replies
0
Views
562
Tbn file come from me, because i used it, when old soft xbmcscrapper was the only solution i found About all other stuff like discart... Change was very difficult from deda POV. I'm agree for continu mp devellopmeent. Ps, nfo support was my acces ticket to mp team. Long time ago. Envoyé de mon LG-H870S en utilisant Tapatalk Edit ...
Tbn file come from me, because i used it, when old soft xbmcscrapper was the only solution i found About all other stuff like...
Hi. We are in the middle of planing the final naming schemes used inside the upcoming Media-Buddy 1.0. Here we want to support as...
Replies
26
Views
917
Hi, seems like an important key mapping is missing in the default full mapping profile: I switched to "Enable HID" + "HID keyboard" + "full" profile after installing my Flirc remote. When occasionally watching a DVD I couldnt navigate in the menu. Seems like there is condition for DVD missing in the HID full profile. I added this for...
Hi, seems like an important key mapping is missing in the default full mapping profile: I switched to "Enable HID" + "HID keyboard"...
Hi, seems like an important key mapping is missing in the default full mapping profile: I switched to "Enable HID" + "HID keyboard"...
Replies
0
Views
600
I just use the visual my sql Editor to modify the particular records. I'm not sure of people's timeline for the radio but I've got to start on least having some records and will probably not have some time to look further into the code until next week.
I just use the visual my sql Editor to modify the particular records. I'm not sure of people's timeline for the radio but I've got...
(Note I have attached code that actually implement this feature request. ) The feature request is similar to what already takes...
Replies
9
Views
1K
Sometimes TV and Radio stations are changing their name. The new name of the stations are in the tuningdetails, but Mediaportal gives no information about it. Suggestions: 1. After a channel scan there should also be an information about channels with new names. 2. Maybe a tab where all channels are listed with different names...
Sometimes TV and Radio stations are changing their name. The new name of the stations are in the tuningdetails, but Mediaportal...
Sometimes TV and Radio stations are changing their name. The new name of the stations are in the tuningdetails, but Mediaportal...
Replies
0
Views
615
I eventually got around to opening up my HTPC and vacuuming inside (first time since purchasing it in 2008 :eek:). There was dust present, but not in excessive amounts. However, only the outlet side of the box-like CPU heatsink was visible. The inlet side was obstructed by the fan, and the other three sides were covered by a...
I eventually got around to opening up my HTPC and vacuuming inside (first time since purchasing it in 2008 :eek:). There was dust...
Change request - update options so audio playback CAN remain active on removal of HDMI connection for music and radio. Rational...
Replies
20
Views
3K
Started on: 2017-05-15 last update: 2017-05-15 Summary: The algorithm for resolving a recording conflict does not act sensibly when there is more than one tuner available. Area: MP Client, TV Server. Description: When the user attempts to schedule a recording that would fail because of too few tuners, the MP Client displays this...
Started on: 2017-05-15 last update: 2017-05-15 Summary: The algorithm for resolving a recording conflict does not act sensibly...
Started on: 2017-05-15 last update: 2017-05-15 Summary: The algorithm for resolving a recording conflict does not act sensibly...
Replies
0
Views
1K
Absolutely no problem mate, happy to help. TTFN - JCMP
Absolutely no problem mate, happy to help. TTFN - JCMP
Dear Developers, MP is a great application. I would like to request an improvement, when pausing TV recordings (and probably...
Replies
3
Views
1K
Very true - setting constant & 90 gives you the 90 second skip - not as 'totally neat' manual skip steps being truly 'to the second' I would say, but as a fixed action [your use case Crix is start of many TV series {Big Bang Theory is about 20 so not all however:( so a frequent need] for a specific condition, it may really be a...
Very true - setting constant & 90 gives you the 90 second skip - not as 'totally neat' manual skip steps being truly 'to the...
Hey, unfortunately it's not possible to create own, second based, skip steps. I recognised, that al lot of TV series have a +/-...
Replies
6
Views
1K
I agree and support the request ;)
I agree and support the request ;)
HI, It is possiblile add "Audio Setup"? So you can choose whether to use WASAPI, ASIO4ALL or another for the whole MediaPortal. It...
Replies
1
Views
1K
MP1 MP2 [Remote] Custom MPtray DE
I'm guessing if MPtray would can launch two separate script (batch, autoit script, powershell script, exe ...) to execute some action before start Media Portal and after its close It would be fine because I've a script created to AutoIT to perform some action such as select the Hdmi audio device , switch the monitor (plasma from...
I'm guessing if MPtray would can launch two separate script (batch, autoit script, powershell script, exe ...) to execute some...
I'm guessing if MPtray would can launch two separate script (batch, autoit script, powershell script, exe ...) to execute some...
Replies
0
Views
587
This is true for almost all of the properties, such as int, lont etc. and for many string properties. If there is no mechanism to change the behavior when you change the properties. How it's done in GUIImage ...
This is true for almost all of the properties, such as int, lont etc. and for many string properties. If there is no mechanism to...
Started on: 2016-12-29 last update: 2016-12-29 Summary: The current processing of XML tags that accept boolean values does not...
Replies
9
Views
1K
MP1 MP2 Idea : Molotov TV DE
Hi, I tested a new web tv apps: Molotov TV Very usefull to watch live TV or replay TV the link: https://www.molotov.tv/ The apps are compatible Android and Windows. Do you think that Molotov TV could be integrated inside MediaPortal (plugin...)? Thanks :)
Hi, I tested a new web tv apps: Molotov TV Very usefull to watch live TV or replay TV the link: https://www.molotov.tv/ The apps...
Hi, I tested a new web tv apps: Molotov TV Very usefull to watch live TV or replay TV the link: https://www.molotov.tv/ The apps...
Replies
0
Views
998
I'd like to integrate a sensor reading page for my home sensors. The current GUI elements are not very helpful.. Maybe there is a general demand for a custom sized full graphic element... My proposal would be to generate a (GDI) window/label and pass a function/eventhandler as argument for the paint/invalidate event. So a plugin...
I'd like to integrate a sensor reading page for my home sensors. The current GUI elements are not very helpful.. Maybe there is a...
I'd like to integrate a sensor reading page for my home sensors. The current GUI elements are not very helpful.. Maybe there is a...
Replies
0
Views
768
Here is mm's working branch. https://github.com/MediaPortal/MediaPortal-1/commits/EXP-TVE3.5-MP1-MP2_mm_working but the master of TVE3.5 is the https://github.com/MediaPortal/MediaPortal-1/tree/EXP-TVE3.5-MP1-MP2
Here is mm's working branch. https://github.com/MediaPortal/MediaPortal-1/commits/EXP-TVE3.5-MP1-MP2_mm_working but the master of...
Just noticed that for older recordings no year is displayed but only the weekday, day and month for my recordings, and I think...
Replies
11
Views
3K
Thanks, Yes, thanks it can be an good way for start.
Thanks, Yes, thanks it can be an good way for start.
Hello, i have one idea for improvement, i detected than few channel can change many times their frequency on DVb-S protocol, and...
Replies
11
Views
2K
I've gone for a different approach because patching all .thumb properties to use the URL (and work with all existing skins) is not something I can do. So instead what I've done is just added an extra skin property, leaving .thumb as it is. The new property is .Icon and is available as #TV.Guide.Icon #TV.Scheduled.Icon and...
I've gone for a different approach because patching all .thumb properties to use the URL (and work with all existing skins) is not...
Summary: Have #TV.Guide.thumb use a provided program-specific image if available Area: TV Guide / xmlTV Description: Currently...
Replies
11
Views
2K
How does that compare to the guide on the TV direct? I would use that as a reference. Are you using FTA epg or something like IceGuide on the MP?
How does that compare to the guide on the TV direct? I would use that as a reference. Are you using FTA epg or something like...
In MediaPortal v1.15, all Australian TV channels related to channel Nine do not display any program data, and MP states it is...
Replies
3
Views
2K
Very good! I think Smart TV interface is an unvaluable option for a TV Server today. Thank you sdf
Very good! I think Smart TV interface is an unvaluable option for a TV Server today. Thank you sdf
Started on: 2016-06-30 last update: 2016-06-30 Summary: Exposing an .m3u playlist with all the Tv channels Area: MyTV Description...
Replies
8
Views
5K
(y) :coffee: Thanks @404, @ajs ! Job well done !
(y) :coffee: Thanks @404, @ajs ! Job well done !
Summary: Setting a reminder in the Program Guide automatically changes channel - choice defaulted to 'Yes'. Area: Tv and Radio...
Replies
102
Views
6K
Hi Sorry to warm up that tread again. I have also an CT2-4650 CI. Unfortunately the CI is not working within MP2, did load the latest version available. I tired it with TT-Viewer, shipped with the box. There the crypted channel worked and the remote controll to. Is there a chance to get this working in MP1 oder MP2? The remote...
Hi Sorry to warm up that tread again. I have also an CT2-4650 CI. Unfortunately the CI is not working within MP2, did load the...
Hi, Any chance we could get CI supported for TechnoTrend Connect CT2-4650 CI in MP 1? Thanks!
Replies
6
Views
1K
This is good, you need to do something the same with MP1. All the same, the 64-bit system is currently better and more stable than the 32-bit one. Especially working in a 64 bit environment.
This is good, you need to do something the same with MP1. All the same, the 64-bit system is currently better and more stable than...
Currently mediaportal is marked as 32 bit, I understand that mediaportal uses a lots of dll from third party which are compiled in...
Replies
23
Views
4K
It would be a very nice feature to be able to create a view filtered on resume time > some number, in order to have a list of videos currently being watched.
It would be a very nice feature to be able to create a view filtered on resume time > some number, in order to have a list of...
It would be a very nice feature to be able to create a view filtered on resume time > some number, in order to have a list of...
Replies
0
Views
1K
Top Bottom