You have an idea how MediaPortal could be improved? Post it in here.
Is yours slow within mediaportal (1.3 beta)?
The list takes longer in the config util but the epg is very fast for me (under a second - 900 channels)
Is yours slow within mediaportal (1.3 beta)?
The list takes longer in the config util but the epg is very fast for me (under a...
Hi,
could you please speed up loading the "All channels" list ? Within the TV Server Configuration AND within MediaPortal it...
How it should look:
Started on: 2012-12-09
last update:
Summary:
I use MP mainly for TV, and would appreciate if the TV Guide shows if I had recorded the show previously, and if I have deleted it, then why!
Some other MP users have had the same idea
MP 1.3.0 Beta - The Titan is coming!
I don't have programming skills, so I hope...
How it should look:
Started on: 2012-12-09
last update:
Summary:
I use MP mainly for TV, and would appreciate if the TV Guide...
How it should look:
Started on: 2012-12-09
last update:
Summary:
I use MP mainly for TV, and would appreciate if the TV Guide...
there is a problem where mediaportal sometimes doesn't read the chapters, it doesn't seem to check if the .txt file with chapters exists when you play a recording, there is some kind of other event that triggers mp to look for the chapter file, as such sometimes MP will play a tv recording without chapters. It would be good if MP...
there is a problem where mediaportal sometimes doesn't read the chapters, it doesn't seem to check if the .txt file with chapters...
Hi
The comskip launcher plugin that comes with tvserver was written a while ago, I think it could be improved a lot.
Comskip...
MP1
MP2
[TV]
Advanced Record - Record (Series) Once - using "series" recording filename formating rules
DE
+1
+1
Could you please integrate a new function under advanced record option - Record series once. The same function like the record once...
Hi Tommy,
That mantis came about due to me talking about live programs over-running, the epg being updated but MP not picking it up. What I'm referring to is the old system that was developed for VCR's and now called Accurate Recording which uses flags in the now/next stream to actively start a recording when it is shown and then...
Hi Tommy,
That mantis came about due to me talking about live programs over-running, the epg being updated but MP not picking it...
@mm1352000
I realise you're a 'tad' busy on TVE related stuff but I was wondering whether any consideration bar this ::thread...
if you use PowerScheduler or PowerScheduler++ you can use the EPG option to run a script. I use it to wake my server and run mc2xml at 3am. see wiki
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/141_Configuration/TV-Server_Configuration/13_Plugins/Power_Scheduler
if you use PowerScheduler or PowerScheduler++ you can use the EPG option to run a script. I use it to wake my server and run mc2xml...
Many people (?the majority) use an external script/bat file to update tvguide.xml and they have to use windows task scheduler to...
Hello,
Can someone take a look at the above post.
This could be very useful in conjunction with the episodescanner tool and MP-TV Series plugin.
Thx.
Jean
Hello,
Can someone take a look at the above post.
This could be very useful in conjunction with the episodescanner tool and MP-TV...
note:
XMLTV importer grap only some of the available items, now Jan van Straaten has developed Webgrab+Plus, witch enables more...
I've not had chance to test yet.. The missus frowns at me whenever I tell her that there is "a new version of Mediaportal"..
And when I say frown... you get the drift...
I've not had chance to test yet.. The missus frowns at me whenever I tell her that there is "a new version of Mediaportal"..
And...
I know many people have asked for USALS support but i have yet to see a definitive answer to date, Will MP ever support USALS for...
You dont have to wait. Here is a patch for MP 1.2.3.: https://forum.team-mediaportal.com/threads/only-first-pressed-channel-number-appears-in-osd.104431/page-3#post-860311
Just replace the .dll with the .dll from the .rar file. But it is recommended to backup your old .dll first and stop your tvservice.exe.
You dont have to wait. Here is a patch for MP 1.2.3...
Hi there:
I mostly switch channel by channel number. But Mediaportal is a real pain there, because you can't see what number you...
Don't know if someone else mentioned it, did search but nothing found.
If you select a channel in the guide, fullscreen tv starts running, but after stop, the first channel is selected.
It would be nice if the selected channel is remembered, so that after you stop watching you can scroll down to check the rest of the guide
Don't know if someone else mentioned it, did search but nothing found.
If you select a channel in the guide, fullscreen tv starts...
Don't know if someone else mentioned it, did search but nothing found.
If you select a channel in the guide, fullscreen tv starts...
- Poll
As doveman has stated, the advantage of a Ramdisk is that is saves wear on your HDD. Also, when recording and watching another channel it reduces the HDD i/o stuff potentially making both operations more reliable... I run an 8GB Ramdisk for this very reason plus when not recording the HDD is spun down so its quieter :-)
As doveman has stated, the advantage of a Ramdisk is that is saves wear on your HDD. Also, when recording and watching another...
Whilst using a RAMdisk for timeshifting is, IMHO, much better than using a HDD it would be even better if MP could just allocate a...
Started on: 2012-09-20
last update: 2012-09-20
Summary: Video capture card support in media portal.
Area: You could add a button to the TV module that says "input" and allows you to select any video capture card inputs you might have.
Description: Just as they are "universal" drivers that TV tuners use which MedaiPortal can use...
Started on: 2012-09-20
last update: 2012-09-20
Summary: Video capture card support in media portal.
Area: You could add a button...
Started on: 2012-09-20
last update: 2012-09-20
Summary: Video capture card support in media portal.
Area: You could add a button...
Hi,
I think it might be quite useful to have a channel manager as part of the client plugin that allows you to select on a per client basis which channels/groups are available to each client. This would allow you to not have duplicate channels for SD/HD on an HD capable unit BUT still allow units that can only decode SD to access...
Hi,
I think it might be quite useful to have a channel manager as part of the client plugin that allows you to select on a per...
Hi,
I think it might be quite useful to have a channel manager as part of the client plugin that allows you to select on a per...
Hello guys,
with the establishment of mp 1.2 the weak dvb-s signal problem got reduced a lot.
Nevertheless when there's a shower of rain outside my system will crash because of this.
Would it be possible the avoid crashing and stop live tv instead?
Or maybe to pause it and restart after a certain time?
My thoughts are the ones from...
Hello guys,
with the establishment of mp 1.2 the weak dvb-s signal problem got reduced a lot.
Nevertheless when there's a shower...
Hello guys,
with the establishment of mp 1.2 the weak dvb-s signal problem got reduced a lot.
Nevertheless when there's a shower...
Hi, @mm1352000
Started on: 2012-08-12
last update: ---
Summary: Channels list option for sort by ...
Area: Mini EPG ( Tv) / maybe TvGuide
Description:
I use DVB-T and DVB-S and i think, is missing some feature, for gestion of channel list ( compared to receiver )
i think is great to add function with color button (button...
Hi, @mm1352000
Started on: 2012-08-12
last update: ---
Summary: Channels list option for sort by ...
Area: Mini EPG ( Tv) /...
Hi, @mm1352000
Started on: 2012-08-12
last update: ---
Summary: Channels list option for sort by ...
Area: Mini EPG ( Tv) /...
Sorry, but there is no direct benefit for the E30 DVB-T/T2 or DVB-C tuners. As I mentioned previously, the interface for the smartcard slot is very low level - my understanding is that we would have to develop something like an MD filter in order to add support for it. I don't have the time, information or intention to do that. The...
Sorry, but there is no direct benefit for the E30 DVB-T/T2 or DVB-C tuners. As I mentioned previously, the interface for the...
Hi,
it would've be good to have CI working in Anysee E7 in Mediaportal TV-Server.
I'm using anysee E7 PTC card with internal CI...
Hi.
For me Timeshift on the same physically drive as Windows never worked. No matter if it's a slow HDD or a fast SSD.. Tons of stutter, droped or bad frames,... Timeshift on a different drive worked, but not as good (fast, reliable) as on RAM Drive. Especially if you have 3 or 4 simultaneous recordings and then start Timeshifting...
Hi.
For me Timeshift on the same physically drive as Windows never worked. No matter if it's a slow HDD or a fast SSD.. Tons of...
Separate the timeshift directory for normal tv watching and separate for paused tv. It will be useful if somebody uses ramdisk for...
My client is XP and my server is Win 7.
My client is XP and my server is Win 7.
Started on: 2012-03-21
last update: 2012-03-21
Summary:
TV-client should also do WOL of TV-server inside MePo when connection is...
few years ago some dev's looked into getting MP to support MHEG and interactive red button services, but this was apparently too difficult and put off to MP2.
Since then there is now an open source project that could be leveraged off:
http://redbutton.sourceforge.net/
Is this something that could go into the roadmap for MP2?
Would...
few years ago some dev's looked into getting MP to support MHEG and interactive red button services, but this was apparently too...
few years ago some dev's looked into getting MP to support MHEG and interactive red button services, but this was apparently too...
Searches need to be implemented different than all the rest (as they should call the recordings, schedules & EPG screens with parameters).
But I have a working solution. Attached are the two modified source files. The parameters supported are:
NoCommand
FullScreen
FullScreen(channelName)
NoFullScreen
NoFullScreen(channelName)
TVOff...
Searches need to be implemented different than all the rest (as they should call the recordings, schedules & EPG screens with...
Started on: 2012-01-23
last update: 2012-01-23
Summary:
Having access via the Basic Home Menu to both options of starting...
Started on: 2012-02-02
last update: 2012-02-02
Summary:
Allow the client to access more than one TV server in relevant priority (similar to prioryty between different TV cards within a Tv server)
Area:
New feature - Client accessing TV servers
Description:
Currently you define the TV server that the client shall use...
Started on: 2012-02-02
last update: 2012-02-02
Summary:
Allow the client to access more than one TV server in relevant...
Started on: 2012-02-02
last update: 2012-02-02
Summary:
Allow the client to access more than one TV server in relevant...
Started on: 2011-12-09
last update: 2011-12-09
Summary: A wish to view a twitter timeline on tv as subtitles
Area: MyTV
Description:
I use infoservice in the menu's of mediaportal and it works fine. I have an twittertimeline and a nice rss-feed in my mainmenu. I like it. Twitter is a growing information website. To make...
Started on: 2011-12-09
last update: 2011-12-09
Summary: A wish to view a twitter timeline on tv as subtitles
Area: MyTV...
Started on: 2011-12-09
last update: 2011-12-09
Summary: A wish to view a twitter timeline on tv as subtitles
Area: MyTV...
Hi superbaton
I posted in the other thread as well so I think you know this already... but for anybody else reading this in the future.
https://forum.team-mediaportal.com/general-development-no-feature-request-here-48/tbs-ci-cam-support-other-improvements-103276/
Testers are welcome!
mm
:)
Hi superbaton
I posted in the other thread as well so I think you know this already... but for anybody else reading this in the...
Hi,
it would've be nice to have CI working in TBS 5980 in Mediaportal TV-Server :)
Right-hand now I am only able to watch FTA...
AW: Teletext Display
Any comment from dev if this is possible? To rescale the TV Screen from fullscreen to half screen and put the Teletext Overlay on the other side? As there are zoom option also including 14:9 and so on - can this be done?
Regards
Markus
AW: Teletext Display
Any comment from dev if this is possible? To rescale the TV Screen from fullscreen to half screen and put the...
Well - I didn't find any setting to do this.
What would be nice is to have the option to split the screen for Teletext and TV -...
I'd like to be added a tag, in Recotding -> Custom path and filenames, to use other fields from EPG Data.
For Example: in EPG I have a tag called <date> with the production year of a movie.
To write a file with the year of production could use a format like: %title%[ (%epgdate%)]
I'd like to be added a tag, in Recotding -> Custom path and filenames, to use other fields from EPG Data.
For Example: in EPG I...
I'd like to be added a tag, in Recotding -> Custom path and filenames, to use other fields from EPG Data.
For Example: in EPG I...
Started on: 2011-11-15
last update: 2011-11-15
Summary: When selecting a channel from the EPG, display a pop-up/indicator to show that the command has been registered, and ignore any remote commands until after playback has started.
Area: Interface / TV / EPG
Description: It takes quite a few seconds from selecting a channel...
Started on: 2011-11-15
last update: 2011-11-15
Summary: When selecting a channel from the EPG, display a pop-up/indicator to...
Started on: 2011-11-15
last update: 2011-11-15
Summary: When selecting a channel from the EPG, display a pop-up/indicator to...
Please post only in English in this part of the forum.
Please post only in English in this part of the forum.
Permanent Timeshift 1.1 bringt Unterstützung für Release 3.2-Images » Dreambox-Blog » Dreambox, Enigma2, Permanent Timeshift...
Well apparently others manage to get it to work with difficulty. I Will try older drivers.
Well apparently others manage to get it to work with difficulty. I Will try older drivers.
Hi,
The CAM Astoncrypt (firmware 2.18, rev 2.0r14) does not work in Multiple Transponder Decrypting (MTD) mode but works well in...
AW: Show info of currently playing show when using timeshift
Would like to see this earlier too but I'm afraid your right....
AW: Show info of currently playing show when using timeshift
Would like to see this earlier too but I'm afraid your right....
Hello guys
Some days ago i watched a tv show and skipped back some minutes.
Using the timeshift now i wanted to see the info...
Started on: 2011-10-15
last update: 2011-10-15
Summary: Allow the user to choose which instance/day in the Upcoming Episodes screen the Record Weekly option applies to.
Area: TV
Description: When in the Upcoming Episodes screen for a programme that shows the various instances of that programme over the next week, it's not...
Started on: 2011-10-15
last update: 2011-10-15
Summary: Allow the user to choose which instance/day in the Upcoming Episodes...
Started on: 2011-10-15
last update: 2011-10-15
Summary: Allow the user to choose which instance/day in the Upcoming Episodes...