improvement suggestions (3 Viewers)

Got an idea how the TV-Engine 0.2 can be improved? Post it here!
  • Locked
  • Sticky
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a template which shows all required informations you have to add to your Improvement Suggestion Thread. note: Add as much informations as possible. You can always update your first post How it should look...
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a...
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a...
Replies
0
Views
1K
Did this feature ever make its way into the TV0.2 engine?
Did this feature ever make its way into the TV0.2 engine?
For those who read the fuzzy recording thread in the TVE3 section, here are the same changes to TVE2. I would love to get...
Replies
25
Views
4K
Perfect, I will give it a shot at his, i dont care who made it, just that it will work :) For now, this thread is closed, I redirect hits to the above link.
Perfect, I will give it a shot at his, i dont care who made it, just that it will work :) For now, this thread is closed, I...
I recently got IP TV, and that replaces my analogue TV channels with far superior quality. I wasted a week figuring out how to...
Replies
15
Views
8K
Please add this feature to the "List" Hi there, can any developer add this feature to the "Future Versions TV Server" List Thx a lot :) :thx:
Please add this feature to the "List" Hi there, can any developer add this feature to the "Future Versions TV Server" List...
Just a question about pressing record during a show. Lets say ive been watching a show from the beginning and half way through i...
Replies
12
Views
3K
Just to clear up my comments. I was agreeing with you and your position and hence my statement on the fact that I respect the position of the devs. I have searched the forums and am very well aware of those topics. Your comment of "BUT the point is, it will NEVER find its way into MP svn or a release." articulates very clearly...
Just to clear up my comments. I was agreeing with you and your position and hence my statement on the fact that I respect the...
Hi I’m using Nexus-s dvb for watching some satellite TV channels. I find out that some plugins like vplug or ***** in some programs...
Replies
11
Views
8K
pity.
pity.
Started on: 2006-12-02 last update: 2006-12-02 Summary: Change the logic between the timeshifting function and the recording...
Replies
10
Views
4K
can media portal grab the epg from the freeview signal? how do i make media portal grab the epg from the freeview signal like we do in england?
can media portal grab the epg from the freeview signal? how do i make media portal grab the epg from the freeview signal like we...
Started on: 2007-02-18 last update: 2007-02-18 Summary: EPG update from DVB-T stream can cause stuttering. Add feature to...
Replies
6
Views
2K
Hello Greetings to all forum Sorry but I do not speak English, I am greatly interested the Timeshift by Vogel, I wanted to ask if you can deploy it to MediaPortal? Is there any software or satellite receiver with a time shift identical to this one? This is the time shift that I use now on my hd dvd recorder philips...
Hello Greetings to all forum Sorry but I do not speak English, I am greatly interested the Timeshift by Vogel, I wanted to ask if...
I don't speak well english so I prefer to put an image to give us my dream... I think that it's possible to increase the...
Replies
5
Views
2K
I've discovered, that picture's noise and tv standard have something in common! It seems to be a bug. I have some channels in Pal B/G and some in Pal D/K in cable television. VERSION 0.2.2.0 of MediaPortal: When I turn off TV while watching one type of channels and turn it on again then there is no sound but white noise (bug), and...
I've discovered, that picture's noise and tv standard have something in common! It seems to be a bug. I have some channels in Pal...
Started on: 2007-01-15 last update: 2007-01-15 Summary: This case is weird. I have over 50 channels via cable tv. Four of...
Replies
4
Views
2K
There probably needs to be a change made to the video editor to make it delete the txt file too...
There probably needs to be a change made to the video editor to make it delete the txt file too...
Delete the comskip files (log, txts) if the video file is deleted by MP.
Replies
4
Views
2K
thx too :)
thx too :)
Prevent hibernate the pc by powerscheduler if comskip still runs.
Replies
4
Views
1K
Guys!!!! THANK YOU !!! That 's it... ok its not build in/ out of the box in MP, but at least the functionality is there!! Thanks again! I will check the named plugins!! one thing is different to my idea: they don't use presets.
Guys!!!! THANK YOU !!! That 's it... ok its not build in/ out of the box in MP, but at least the functionality is there...
Hi, very often we find the situation while watching TV that various channels have a 4:3 aspect other has 16:9 other is HD, and so...
Replies
3
Views
1K
I might have a look at putting this WOL into the TV-plugin if i can find the right place in the code.
I might have a look at putting this WOL into the TV-plugin if i can find the right place in the code.
Started on: 2007-03-18 last update: 2006-03-18 Summary: I just noticed that the default behaviour of the MyTV plugin is to ask...
Replies
3
Views
2K
great idea. use VLC player usually for this i'd be highly interested in getting this as well integrated in MP
great idea. use VLC player usually for this i'd be highly interested in getting this as well integrated in MP
Started on: 2008-04-25 last update: 2008-04-25 Summary: Adjust playback rate of a prerecorded TV program anywhere from half...
Replies
3
Views
2K
In the config menu got to general en there you will see a menu with the name 'deamon' here you have to point MP to where it can start to use Deamon tools (for me: c:\program files\deamon\deamon.exe) Deamon tools makes the PC think that the .ISO is actual a DVD in a (fake) DVD-drive. If you still don't see .iso files in MP, then...
In the config menu got to general en there you will see a menu with the name 'deamon' here you have to point MP to where it can...
Hi, I have a lot of Iso Images. I asked myself why I can't open the iso image directly from the My Video Section. It should be...
Replies
3
Views
2K
MP1 MP2 Belgian TV guide (1 Viewer) DE
Jxmltv has changed to a commercial use ! Therefore i switched to WebEPG, you can find the configuration tool for this in the MediaPortal root folder on your computer and directions on the following adres: directory.http://wiki.team-mediaportal.com/MediaPortal_Setup_Customising_WebEPG
Jxmltv has changed to a commercial use ! Therefore i switched to WebEPG, you can find the configuration tool for this in the...
Started on: 2007-07-19 last update: 2007-07-19 Description: Could you please add the belgian xmltv guide to mediaportal ...
Replies
2
Views
2K
I see. Well I agree with all the comments posted by the non-developers on this issue. Anyone who does press Stop accidentally and looses the buffer of a show he was time shifting, will not likely do it again! Non-consistent behaviour like this is frustrating to normal (non-advanced) users, and I think the emphasis for this...
I see. Well I agree with all the comments posted by the non-developers on this issue. Anyone who does press Stop accidentally and...
To be consistent with watching recorded TV, videos, music, etc, I suggest the Stop function stops TV when in full screen mode...
Replies
2
Views
1K
I'm going to guess that it isn't possible. As TVEngine 2 relies on the Microsoft recording engine, i boubt there would be a way round it to enable multiple channel recording from a single MUX. Even if it was possible, in the long run it would benefit far more people (i.e. everyone) if the resources needed to code it were used to...
I'm going to guess that it isn't possible. As TVEngine 2 relies on the Microsoft recording engine, i boubt there would be a way...
How is difficult to implement the fantastic feature of use multiple DVB-S channel with single card on Engine 2.0 ? I think that...
Replies
1
Views
1K
Good Morning, Can I add my voice to this request. Renaming needs to be added to not only the manual record, but also to a series recording derived from the TV Guide. At the moment it takes the description and episode information to name the series. (i.e. Dr Who - "episode title") and names all following episodes the same. This...
Good Morning, Can I add my voice to this request. Renaming needs to be added to not only the manual record, but also to a...
I Have wanted to rename manually setup scheduled records for some time & am surprised it has not been added as a function. Eg. I...
Replies
1
Views
1K
J
Discussed in other threads. Currently impossible.
Discussed in other threads. Currently impossible.
Started on: 2007-8-22 last update: Summary: >a client small enough to run on WINDOWS CE Description: >i think keep the client...
Replies
1
Views
1K
I think the guys have been trying to do this, but the problem is that sometimes the tvguide data does not have enough details to distinguish between different episodes. I agree though, this is definetly useful
I think the guys have been trying to do this, but the problem is that sometimes the tvguide data does not have enough details to...
Started on: 2006-12-19 last update: 2006-12-19 Summary: Make a way for MediaPortal to track what episodes of a series have already...
Replies
1
Views
1K
just to make sure, this doesn't get lost. If MP could remember it's last window position and size for the next start it would be great. Thanks, Gregor
just to make sure, this doesn't get lost. If MP could remember it's last window position and size for the next start it would be...
Hi developers, here is a feature that would be nice to have. Can you make MP remeber it's last window position ? Whenever I...
Replies
1
Views
1K
MP1 MP2 Recording conflicts DE
This is called a "back-to-back" recording. The current SVNs should recognize this and work properly ('should').
This is called a "back-to-back" recording. The current SVNs should recognize this and work properly ('should').
I have noticed that when using only a single tuner and setting one scheduled recording after another on the same channel causes a...
Replies
1
Views
1K
i think the picture-section needs some more work for a great experience. since 1.3 after looking a video in the picture section, the focus get on the first file in the folder and the slideshow is over. Only for picture is all working fine, but with videos together is it a bit notchy...
i think the picture-section needs some more work for a great experience. since 1.3 after looking a video in the picture section...
Some img viewers (especially slideshows) are much more better then orig viewer in MP. I can't see the way to watch TV, Videos...
Replies
1
Views
1K
Not possinble for few reasons: 1) MediaPortal build in TV engine development has stopped 2) Old tv engine uses MS Stream Buffer Engine and its not supporting anything other than DVR-MS file format
Not possinble for few reasons: 1) MediaPortal build in TV engine development has stopped 2) Old tv engine uses MS Stream Buffer...
Started on: 29/9/2008 (originally posted in the wrong section) last update: 29/9/2008 Summary: Record as .m2ts file...
Replies
1
Views
2K
well, this is not a bug ;) moved to correct forum.
well, this is not a bug ;) moved to correct forum.
Each LNB should have an individual "Ku-Band Config" and "C-Band/Circular Config" setting. Right now, the setting is per dvb-s card...
Replies
1
Views
2K
Have you heard anything about this recently? Maybe a workaround of sorts? This is incredibly annoying. :)
Have you heard anything about this recently? Maybe a workaround of sorts? This is incredibly annoying. :)
1. I've noticed that when a scheduled show/program has multiple planned recordings and one of the recordings is giving a...
Replies
1
Views
1K
Hi, First tell us what system you have & what MP version you use & then enable debug mode in MP Setup -> General -> Log level & attact mediaportal.log & or mediaportal.bak to your post. It works fine here with MP 0.2.3.0 + - svn's Regards Roy
Hi, First tell us what system you have & what MP version you use & then enable debug mode in MP Setup -> General -> Log level &...
My PC isn't waking up to record scheduled TV programs. It records OK if MP is already running. Is this a bug or (more likely) a...
Replies
1
Views
1K
Hi, often asked for. Its somewhere on the ToDo, but with low priority. The problem is, that the internal player has to be rewritten to get PiP working. Flip.
Hi, often asked for. Its somewhere on the ToDo, but with low priority. The problem is, that the internal player has to be...
Hi, wouldn't this be a nice feature? When you have two cards and both are not recording, I'd really like a PiP feature... What...
Replies
1
Views
3K
and then end up with huge log files ?? no thanks.
and then end up with huge log files ?? no thanks.
Sometimes, MP halts. Wouldn't it be nice to see when it happened? I was thinking of logging a heartbeat every n seconds. :thx:
Replies
1
Views
948
Yes! I'm just a starter with mediaportal, but this is something I really miss. If I understand correctly, we are looking for on-screen buttons to stop, rewind and fast-forward in full screen, so you can use your mouse for this. Just like in MCE. I also really miss a slider-bar you can use to go to a specific location in your...
Yes! I'm just a starter with mediaportal, but this is something I really miss. If I understand correctly, we are looking for...
What about a timeshift-quit-hotkey while i watch tv. i think the stop-button ("b") should be a good ergonomic choice =)
Replies
1
Views
1K
Top Bottom