improvement suggestions (3 Viewers)

Got an idea how the TV-Engine 0.2 can be improved? Post it here!
  • Locked
  • Sticky
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a template which shows all required informations you have to add to your Improvement Suggestion Thread. note: Add as much informations as possible. You can always update your first post How it should look...
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a...
HowTo: post an Improvement Suggestion You have an idea how MediaPortal could be improvend? GREAT! :) Below you will find a...
Replies
0
Views
1K
Hi, and first of all :AMAZING piece of software!!! But now: for recorded tv, would it be possible / is it in project to be able to compress in h.264/mp4 ? I think the quality is much better than all divx/xvid and so on. thx
Hi, and first of all :AMAZING piece of software!!! But now: for recorded tv, would it be possible / is it in project to be able...
Hi, and first of all :AMAZING piece of software!!! But now: for recorded tv, would it be possible / is it in project to be able...
Replies
0
Views
1K
MP1 MP2 New Cahnnel tunning DE
Hi. Just an idea. How about feature that enables to scan channels and/or at least manually add new feed from MP gui. I'm wathing for example F1incinema feed in thor, and it's guite a work to get it to work in MP. And because it changes in every transmission, it would be easier to input parameters in gui using remote. regs...
Hi. Just an idea. How about feature that enables to scan channels and/or at least manually add new feed from MP gui. I'm...
Hi. Just an idea. How about feature that enables to scan channels and/or at least manually add new feed from MP gui. I'm...
Replies
0
Views
1K
Started on: 2007-01-08 last update: 2007-01-08 Summary: Changing radio station with pressing number 1-9, and prog(ch) +,- Description: When I'm listening radio station I don't need tv, so it's off, but when I want change station I need first turn tv on, because I don't know where is selection. Adding option to select radio...
Started on: 2007-01-08 last update: 2007-01-08 Summary: Changing radio station with pressing number 1-9, and prog(ch) +,-...
Started on: 2007-01-08 last update: 2007-01-08 Summary: Changing radio station with pressing number 1-9, and prog(ch) +,-...
Replies
0
Views
953
I have the card DVB-S2 (Twinhan 1041). MediaPortal does not allow to use DiseqC with this card.. Is there the possibility of reparation this?
I have the card DVB-S2 (Twinhan 1041). MediaPortal does not allow to use DiseqC with this card.. Is there the possibility of...
I have the card DVB-S2 (Twinhan 1041). MediaPortal does not allow to use DiseqC with this card.. Is there the possibility of...
Replies
0
Views
1K
SorryI apologize for confusion. It turned out that Media Portal he does not support the service Diseqc on my card DVB-S2 (Twinhan 1041) and I search for programmes on the inappropriate satellite:)
SorryI apologize for confusion. It turned out that Media Portal he does not support the service Diseqc on my card DVB-S2 (Twinhan...
SorryI apologize for confusion. It turned out that Media Portal he does not support the service Diseqc on my card DVB-S2 (Twinhan...
Replies
0
Views
1K
i think mediaportial should integrate open source driver and only use then if it can find one on the system to use
i think mediaportial should integrate open source driver and only use then if it can find one on the system to use
i think mediaportial should integrate open source driver and only use then if it can find one on the system to use
Replies
0
Views
1K
MP1 MP2 tv and music DE
It would be nice if there were an option like 'keep tv on while playing music'. In my country at daytime (and at night) tv channels only show chat or other stupid mobile games with annoying hosts so this kinda option would be extremely nice. I could keep tv running fullscreen or in the little box in folder view while listening to...
It would be nice if there were an option like 'keep tv on while playing music'. In my country at daytime (and at night) tv...
It would be nice if there were an option like 'keep tv on while playing music'. In my country at daytime (and at night) tv...
Replies
0
Views
958
It would be great if there was an option to use the live preview output of the Hauppauge PVR 150/500 cards. This bypasses the onboard mpeg encoding when just watching tv and eliminates the througput delay. GB PVR has this option and it seems to work okay.
It would be great if there was an option to use the live preview output of the Hauppauge PVR 150/500 cards. This bypasses the...
It would be great if there was an option to use the live preview output of the Hauppauge PVR 150/500 cards. This bypasses the...
Replies
0
Views
2K
C L O S E D ViewModeSwitcher Plugin is under development... https://forum.team-mediaportal.com/viewmodeswitcher_plugin-t21365.html It is DVB-T dependend. Some TV stations sends movies in 4:3 format, but the movie content is inside black bars up and down the movie. It is not really 16:9 format, it will only less compressed...
C L O S E D ViewModeSwitcher Plugin is under development...
C L O S E D ViewModeSwitcher Plugin is under development...
Replies
0
Views
1K
Started on: 2009-02-03 last update: 2009-02-03 Summary: show jump interval in gui when pressing skip chapter Description: when playing back recorded TV, you can use the skip chapter button to jump over an advertisement block (if there is a comskip log). It would be nice if the GUI would briefly show how much it jumps (just...
Started on: 2009-02-03 last update: 2009-02-03 Summary: show jump interval in gui when pressing skip chapter Description...
Started on: 2009-02-03 last update: 2009-02-03 Summary: show jump interval in gui when pressing skip chapter Description...
Replies
0
Views
1K
Hi, to resolve all suspend problems with powerscheduler plugin and so on, i suggest to include in the advanced parameters of a recording program (scheduled or manual) the possibility to suspend PC after the recording ends. It would be a parameter called 'action to perform after recording" and a list of choices between 'Suspend'...
Hi, to resolve all suspend problems with powerscheduler plugin and so on, i suggest to include in the advanced parameters of a...
Hi, to resolve all suspend problems with powerscheduler plugin and so on, i suggest to include in the advanced parameters of a...
Replies
0
Views
1K
Hi, Here is my file name patern: %channel%_%title%_%startyear%%startmonth%%startday%_%starthh%%startmm%-%endhh%%endmm% The result file name is: Club_Vásott kölykök_2007116_730-830.dvr-ms The expet name is: Club_Vásott klöykök_20070116_0730-0830.dvr-ms The regional setting is hungarian. OS: windows xp sp2 hungarian version
Hi, Here is my file name patern: %channel%_%title%_%startyear%%startmonth%%startday%_%starthh%%startmm%-%endhh%%endmm% The...
Hi, Here is my file name patern: %channel%_%title%_%startyear%%startmonth%%startday%_%starthh%%startmm%-%endhh%%endmm% The...
Replies
0
Views
1K
I think there are lot of non Hauppage cards used with MP. Pls. support the quality setting like Hauppage PVR cards. Thanks in advance!
I think there are lot of non Hauppage cards used with MP. Pls. support the quality setting like Hauppage PVR cards. Thanks in...
I think there are lot of non Hauppage cards used with MP. Pls. support the quality setting like Hauppage PVR cards. Thanks in...
Replies
0
Views
1K
Started on: 2007-01-30 last update: 2007-01-30 Summary: The EPG conflict process is not initiated on all occasions. Description: Scenario: Using SVN 12784 with 2 TV cards and 2 already scheduled programs which overlap. If one selects a 3rd program from the TV Guide which conflicts with the other 2, control is passed to the...
Started on: 2007-01-30 last update: 2007-01-30 Summary: The EPG conflict process is not initiated on all occasions...
Started on: 2007-01-30 last update: 2007-01-30 Summary: The EPG conflict process is not initiated on all occasions...
Replies
0
Views
999
Hi, the more I get familiar with all the functions, the more I am impressed about the software ! Good job! :thx: Just on suggestion for improvement: When time shifting, I always see the actual time at the right side of the timeline. For me it would be much more logical if the time in the timeshift buffer (the time of the...
Hi, the more I get familiar with all the functions, the more I am impressed about the software ! Good job! :thx: Just on...
Hi, the more I get familiar with all the functions, the more I am impressed about the software ! Good job! :thx: Just on...
Replies
0
Views
1K
One thing I liked about the MCE2005 frontend was the system tray icon which showed when TV recording(s) were active & being able to cancel them without having to go into the programme to stop them. Having to enter MP>MyTV>Schedules & click on the active stream you wish, then click 'stop recording' is pretty convoluted. It would be...
One thing I liked about the MCE2005 frontend was the system tray icon which showed when TV recording(s) were active & being able to...
One thing I liked about the MCE2005 frontend was the system tray icon which showed when TV recording(s) were active & being able to...
Replies
0
Views
1K
I was wondering if mediaportal can be compatible with the Xbox 360 and other game console out there now?
I was wondering if mediaportal can be compatible with the Xbox 360 and other game console out there now?
I was wondering if mediaportal can be compatible with the Xbox 360 and other game console out there now?
Replies
0
Views
3K
When a DVB-t channel is chopping just a litle bit I hear a high pitch squiching noice. Anyone else noteced this? In my pinnacle software I do not hear this noice. Can this be fixed in Mediaportal?
When a DVB-t channel is chopping just a litle bit I hear a high pitch squiching noice. Anyone else noteced this? In my pinnacle...
When a DVB-t channel is chopping just a litle bit I hear a high pitch squiching noice. Anyone else noteced this? In my pinnacle...
Replies
0
Views
1K
It would be great if the ability to group the analog and digital parts of hybrid cards that exist in TVE3 could be incorporated also in TVE2 as part of the final 0.2.3.0 release, since that will be the last version using TVE2.
It would be great if the ability to group the analog and digital parts of hybrid cards that exist in TVE3 could be incorporated...
It would be great if the ability to group the analog and digital parts of hybrid cards that exist in TVE3 could be incorporated...
Replies
0
Views
1K
I'm going to guess that it isn't possible. As TVEngine 2 relies on the Microsoft recording engine, i boubt there would be a way round it to enable multiple channel recording from a single MUX. Even if it was possible, in the long run it would benefit far more people (i.e. everyone) if the resources needed to code it were used to...
I'm going to guess that it isn't possible. As TVEngine 2 relies on the Microsoft recording engine, i boubt there would be a way...
How is difficult to implement the fantastic feature of use multiple DVB-S channel with single card on Engine 2.0 ? I think that...
Replies
1
Views
1K
Good Morning, Can I add my voice to this request. Renaming needs to be added to not only the manual record, but also to a series recording derived from the TV Guide. At the moment it takes the description and episode information to name the series. (i.e. Dr Who - "episode title") and names all following episodes the same. This...
Good Morning, Can I add my voice to this request. Renaming needs to be added to not only the manual record, but also to a...
I Have wanted to rename manually setup scheduled records for some time & am surprised it has not been added as a function. Eg. I...
Replies
1
Views
1K
J
Discussed in other threads. Currently impossible.
Discussed in other threads. Currently impossible.
Started on: 2007-8-22 last update: Summary: >a client small enough to run on WINDOWS CE Description: >i think keep the client...
Replies
1
Views
1K
I think the guys have been trying to do this, but the problem is that sometimes the tvguide data does not have enough details to distinguish between different episodes. I agree though, this is definetly useful
I think the guys have been trying to do this, but the problem is that sometimes the tvguide data does not have enough details to...
Started on: 2006-12-19 last update: 2006-12-19 Summary: Make a way for MediaPortal to track what episodes of a series have already...
Replies
1
Views
1K
just to make sure, this doesn't get lost. If MP could remember it's last window position and size for the next start it would be great. Thanks, Gregor
just to make sure, this doesn't get lost. If MP could remember it's last window position and size for the next start it would be...
Hi developers, here is a feature that would be nice to have. Can you make MP remeber it's last window position ? Whenever I...
Replies
1
Views
1K
MP1 MP2 Recording conflicts DE
This is called a "back-to-back" recording. The current SVNs should recognize this and work properly ('should').
This is called a "back-to-back" recording. The current SVNs should recognize this and work properly ('should').
I have noticed that when using only a single tuner and setting one scheduled recording after another on the same channel causes a...
Replies
1
Views
1K
i think the picture-section needs some more work for a great experience. since 1.3 after looking a video in the picture section, the focus get on the first file in the folder and the slideshow is over. Only for picture is all working fine, but with videos together is it a bit notchy...
i think the picture-section needs some more work for a great experience. since 1.3 after looking a video in the picture section...
Some img viewers (especially slideshows) are much more better then orig viewer in MP. I can't see the way to watch TV, Videos...
Replies
1
Views
1K
Not possinble for few reasons: 1) MediaPortal build in TV engine development has stopped 2) Old tv engine uses MS Stream Buffer Engine and its not supporting anything other than DVR-MS file format
Not possinble for few reasons: 1) MediaPortal build in TV engine development has stopped 2) Old tv engine uses MS Stream Buffer...
Started on: 29/9/2008 (originally posted in the wrong section) last update: 29/9/2008 Summary: Record as .m2ts file...
Replies
1
Views
2K
well, this is not a bug ;) moved to correct forum.
well, this is not a bug ;) moved to correct forum.
Each LNB should have an individual "Ku-Band Config" and "C-Band/Circular Config" setting. Right now, the setting is per dvb-s card...
Replies
1
Views
2K
Have you heard anything about this recently? Maybe a workaround of sorts? This is incredibly annoying. :)
Have you heard anything about this recently? Maybe a workaround of sorts? This is incredibly annoying. :)
1. I've noticed that when a scheduled show/program has multiple planned recordings and one of the recordings is giving a...
Replies
1
Views
1K
Hi, First tell us what system you have & what MP version you use & then enable debug mode in MP Setup -> General -> Log level & attact mediaportal.log & or mediaportal.bak to your post. It works fine here with MP 0.2.3.0 + - svn's Regards Roy
Hi, First tell us what system you have & what MP version you use & then enable debug mode in MP Setup -> General -> Log level &...
My PC isn't waking up to record scheduled TV programs. It records OK if MP is already running. Is this a bug or (more likely) a...
Replies
1
Views
1K
Top Bottom