improvement suggestions (1 Viewer)
Got an idea how the TV-Engine 0.2 can be improved? Post it here!
- Locked
- Sticky
HowTo: post an Improvement Suggestion
You have an idea how MediaPortal could be improvend?
GREAT! :)
Below you will find a template which shows all required informations you have to add to your Improvement Suggestion Thread.
note:
Add as much informations as possible.
You can always update your first post
How it should look...
HowTo: post an Improvement Suggestion
You have an idea how MediaPortal could be improvend?
GREAT! :)
Below you will find a...
HowTo: post an Improvement Suggestion
You have an idea how MediaPortal could be improvend?
GREAT! :)
Below you will find a...
Just to clear up my comments. I was agreeing with you and your position and hence my statement on the fact that I respect the position of the devs.
I have searched the forums and am very well aware of those topics. Your comment of "BUT the point is, it will NEVER find its way into MP svn or a release." articulates very clearly...
Just to clear up my comments. I was agreeing with you and your position and hence my statement on the fact that I respect the...
Hi I’m using Nexus-s dvb for watching some satellite TV channels. I find out that some plugins like vplug or ***** in some programs...
I have the card DVB-S2 (Twinhan 1041).
MediaPortal does not allow to use DiseqC with this card..
Is there the possibility of reparation this?
I have the card DVB-S2 (Twinhan 1041).
MediaPortal does not allow to use DiseqC with this card..
Is there the possibility of...
I have the card DVB-S2 (Twinhan 1041).
MediaPortal does not allow to use DiseqC with this card..
Is there the possibility of...
I think there are lot of non Hauppage cards used with MP. Pls. support the quality setting like Hauppage PVR cards.
Thanks in advance!
I think there are lot of non Hauppage cards used with MP. Pls. support the quality setting like Hauppage PVR cards.
Thanks in...
I think there are lot of non Hauppage cards used with MP. Pls. support the quality setting like Hauppage PVR cards.
Thanks in...
well, this is not a bug ;)
moved to correct forum.
well, this is not a bug ;)
moved to correct forum.
Each LNB should have an individual "Ku-Band Config" and "C-Band/Circular Config" setting. Right now, the setting is per dvb-s card...
It would be nice if there were an option like 'keep tv on while playing music'.
In my country at daytime (and at night) tv channels only show chat or other stupid mobile games with annoying hosts so this kinda option would be extremely nice. I could keep tv running fullscreen or in the little box in folder view while listening to...
It would be nice if there were an option like 'keep tv on while playing music'.
In my country at daytime (and at night) tv...
It would be nice if there were an option like 'keep tv on while playing music'.
In my country at daytime (and at night) tv...
pity.
pity.
Started on: 2006-12-02
last update: 2006-12-02
Summary:
Change the logic between the timeshifting function and the recording...
Yes! I'm just a starter with mediaportal, but this is something I really miss.
If I understand correctly, we are looking for on-screen buttons to stop, rewind and fast-forward in full screen, so you can use your mouse for this. Just like in MCE.
I also really miss a slider-bar you can use to go to a specific location in your...
Yes! I'm just a starter with mediaportal, but this is something I really miss.
If I understand correctly, we are looking for...
What about a timeshift-quit-hotkey while i watch tv.
i think the stop-button ("b") should be a good ergonomic choice =)
Hi,
the more I get familiar with all the functions, the more I am impressed about the software ! Good job! :thx:
Just on suggestion for improvement:
When time shifting, I always see the actual time at the right side of the timeline. For me it would be much more logical if the time in the timeshift buffer (the time of the...
Hi,
the more I get familiar with all the functions, the more I am impressed about the software ! Good job! :thx:
Just on...
Hi,
the more I get familiar with all the functions, the more I am impressed about the software ! Good job! :thx:
Just on...
SorryI apologize for confusion.
It turned out that Media Portal he does not support the service Diseqc on my card DVB-S2 (Twinhan 1041) and I search for programmes on the inappropriate satellite:)
SorryI apologize for confusion.
It turned out that Media Portal he does not support the service Diseqc on my card DVB-S2 (Twinhan...
SorryI apologize for confusion.
It turned out that Media Portal he does not support the service Diseqc on my card DVB-S2 (Twinhan...
I see. Well I agree with all the comments posted by the non-developers on this issue. Anyone who does press Stop accidentally and looses the buffer of a show he was time shifting, will not likely do it again!
Non-consistent behaviour like this is frustrating to normal (non-advanced) users, and I think the emphasis for this...
I see. Well I agree with all the comments posted by the non-developers on this issue. Anyone who does press Stop accidentally and...
To be consistent with watching recorded TV, videos, music, etc, I suggest the Stop function stops TV when in full screen mode...
C L O S E D
ViewModeSwitcher Plugin is under development... https://forum.team-mediaportal.com/viewmodeswitcher_plugin-t21365.html
It is DVB-T dependend.
Some TV stations sends movies in 4:3 format, but the movie content is inside black bars up and down the movie.
It is not really 16:9 format, it will only less compressed...
C L O S E D
ViewModeSwitcher Plugin is under development...
C L O S E D
ViewModeSwitcher Plugin is under development...
Started on: 2009-02-03
last update: 2009-02-03
Summary: show jump interval in gui when pressing skip chapter
Description: when playing back recorded TV, you can use the skip chapter button to jump over an advertisement block (if there is a comskip log).
It would be nice if the GUI would briefly show how much it jumps (just...
Started on: 2009-02-03
last update: 2009-02-03
Summary: show jump interval in gui when pressing skip chapter
Description...
Started on: 2009-02-03
last update: 2009-02-03
Summary: show jump interval in gui when pressing skip chapter
Description...
Hi,
to resolve all suspend problems with powerscheduler plugin and so on, i suggest to include in the advanced parameters of a recording program (scheduled or manual) the possibility to suspend PC after the recording ends.
It would be a parameter called 'action to perform after recording" and a list of choices between 'Suspend'...
Hi,
to resolve all suspend problems with powerscheduler plugin and so on, i suggest to include in the advanced parameters of a...
Hi,
to resolve all suspend problems with powerscheduler plugin and so on, i suggest to include in the advanced parameters of a...
can media portal grab the epg from the freeview signal?
how do i make media portal grab the epg from the freeview signal like we do in england?
can media portal grab the epg from the freeview signal?
how do i make media portal grab the epg from the freeview signal like we...
Started on: 2007-02-18
last update: 2007-02-18
Summary:
EPG update from DVB-T stream can cause stuttering. Add feature to...
Good Morning,
Can I add my voice to this request.
Renaming needs to be added to not only the manual record, but also to a series recording derived from the TV Guide.
At the moment it takes the description and episode information to name the series. (i.e. Dr Who - "episode title") and names all following episodes the same. This...
Good Morning,
Can I add my voice to this request.
Renaming needs to be added to not only the manual record, but also to a...
I Have wanted to rename manually setup scheduled records for some time & am surprised it has not been added as a function. Eg. I...
just to make sure, this doesn't get lost.
If MP could remember it's last window position and size for the next start it would be great.
Thanks,
Gregor
just to make sure, this doesn't get lost.
If MP could remember it's last window position and size for the next start it would be...
Hi developers,
here is a feature that would be nice to have.
Can you make MP remeber it's last window position ?
Whenever I...
Have you heard anything about this recently? Maybe a workaround of sorts? This is incredibly annoying. :)
Have you heard anything about this recently? Maybe a workaround of sorts? This is incredibly annoying. :)
1.
I've noticed that when a scheduled show/program has multiple planned recordings and one of the recordings is giving a...
This is called a "back-to-back" recording. The current SVNs should recognize this and work properly ('should').
This is called a "back-to-back" recording. The current SVNs should recognize this and work properly ('should').
I have noticed that when using only a single tuner and setting one scheduled recording after another on the same channel causes a...
Not possinble for few reasons:
1) MediaPortal build in TV engine development has stopped
2) Old tv engine uses MS Stream Buffer Engine and its not supporting anything other than DVR-MS file format
Not possinble for few reasons:
1) MediaPortal build in TV engine development has stopped
2) Old tv engine uses MS Stream Buffer...
Started on: 29/9/2008 (originally posted in the wrong section)
last update: 29/9/2008
Summary: Record as .m2ts file...
Please add this feature to the "List"
Hi there,
can any developer add this feature to the "Future Versions TV Server" List
Thx a lot :) :thx:
Please add this feature to the "List"
Hi there,
can any developer add this feature to the "Future Versions TV Server" List...
Just a question about pressing record during a show.
Lets say ive been watching a show from the beginning and half way through i...
I've discovered, that picture's noise and tv standard have something in common!
It seems to be a bug. I have some channels in Pal B/G and some in Pal D/K in cable television.
VERSION 0.2.2.0 of MediaPortal:
When I turn off TV while watching one type of channels and turn it on again then there is no sound but white noise (bug), and...
I've discovered, that picture's noise and tv standard have something in common!
It seems to be a bug. I have some channels in Pal...
Started on: 2007-01-15
last update: 2007-01-15
Summary:
This case is weird. I have over 50 channels via cable tv. Four of...
Hi,
often asked for. Its somewhere on the ToDo, but with low priority. The problem is, that the internal player has to be rewritten to get PiP working.
Flip.
Hi,
often asked for. Its somewhere on the ToDo, but with low priority. The problem is, that the internal player has to be...
Hi,
wouldn't this be a nice feature? When you have two cards and both are not recording, I'd really like a PiP feature... What...
i think mediaportial should integrate open source driver and only use then if it can find one on the system to use
i think mediaportial should integrate open source driver and only use then if it can find one on the system to use
i think mediaportial should integrate open source driver and only use then if it can find one on the system to use
In the config menu got to general en there you will see a menu with the name 'deamon' here you have to point MP to where it can start to use Deamon tools (for me: c:\program files\deamon\deamon.exe)
Deamon tools makes the PC think that the .ISO is actual a DVD in a (fake) DVD-drive.
If you still don't see .iso files in MP, then...
In the config menu got to general en there you will see a menu with the name 'deamon' here you have to point MP to where it can...
Hi,
I have a lot of Iso Images.
I asked myself why I can't open the iso image directly from the My Video Section.
It should be...
Hi,
First tell us what system you have & what MP version you use & then enable debug mode in MP Setup -> General -> Log level & attact mediaportal.log & or mediaportal.bak to your post.
It works fine here with MP 0.2.3.0 + - svn's
Regards
Roy
Hi,
First tell us what system you have & what MP version you use & then enable debug mode in MP Setup -> General -> Log level &...
My PC isn't waking up to record scheduled TV programs. It records OK if MP is already running. Is this a bug or (more likely) a...
Hi.
Just an idea. How about feature that enables to scan channels and/or at least manually
add new feed from MP gui. I'm wathing for example F1incinema feed in thor, and it's
guite a work to get it to work in MP. And because it changes in every transmission,
it would be easier to input parameters in gui using remote.
regs...
Hi.
Just an idea. How about feature that enables to scan channels and/or at least manually
add new feed from MP gui. I'm...
Hi.
Just an idea. How about feature that enables to scan channels and/or at least manually
add new feed from MP gui. I'm...
Hello Greetings to all forum
Sorry but I do not speak English, I am greatly interested the Timeshift by Vogel, I wanted to ask if you can deploy it to MediaPortal?
Is there any software or satellite receiver with a time shift identical to this one?
This is the time shift that I use now on my hd dvd recorder philips...
Hello Greetings to all forum
Sorry but I do not speak English, I am greatly interested the Timeshift by Vogel, I wanted to ask if...
I don't speak well english so I prefer to put an image to give us my dream...
I think that it's possible to increase the...
I'm going to guess that it isn't possible.
As TVEngine 2 relies on the Microsoft recording engine, i boubt there would be a way round it to enable multiple channel recording from a single MUX.
Even if it was possible, in the long run it would benefit far more people (i.e. everyone) if the resources needed to code it were used to...
I'm going to guess that it isn't possible.
As TVEngine 2 relies on the Microsoft recording engine, i boubt there would be a way...
How is difficult to implement the fantastic feature of use multiple DVB-S channel with single card on Engine 2.0 ?
I think that...
Hi, and first of all :AMAZING piece of software!!!
But now: for recorded tv, would it be possible / is it in project to be able to compress in h.264/mp4 ?
I think the quality is much better than all divx/xvid and so on.
thx
Hi, and first of all :AMAZING piece of software!!!
But now: for recorded tv, would it be possible / is it in project to be able...
Hi, and first of all :AMAZING piece of software!!!
But now: for recorded tv, would it be possible / is it in project to be able...
I was wondering if mediaportal can be compatible with the Xbox 360 and other game console out there now?
I was wondering if mediaportal can be compatible with the Xbox 360 and other game console out there now?
I was wondering if mediaportal can be compatible with the Xbox 360 and other game console out there now?