Discussions about Remote Controls, VFD's, keyboards and their drivers in here
- Sticky
Please note that the 'Microsoft MCE' handler is now deprecated and will be withdrawn in MP 1.13.
All MCE remotes and other eHome IR devices are now driven by our new HID handler.
Please note that the 'Microsoft MCE' handler is now deprecated and will be withdrawn in MP 1.13.
All MCE remotes and other eHome IR...
Recommended Remotes:
Remotes in this thread have all been verified by users to work with MediaPortal without any additional...
Yes, I think that may be the case. When I started this thread however long ago, the mapped eject button definitely worked as expected. I did notice that it had stopped working a while back with my system, but as I don't often use optical discs, I had no clue when it had stopped working. I couldn't figure out what was wrong, and I...
Yes, I think that may be the case. When I started this thread however long ago, the mapped eject button definitely worked as...
I have an HP MCE remote like the one below. There are two buttons, "Eject" and "Visualisations" that don't appear in the MCE remote...
it works for MCE remote, thanks :)
it works for MCE remote, thanks :)
i nearly killed my pc with this
pressed it, thinking it would at least ask me
pc powered off to hypernation
couldnt...
I have the One-for-All 7960, which is identical to the 7962, apart from lacking the "Smart Motion" control. Code 1272 is the correct one to use. With my Microsoft-compatible Dell IR receiver, all buttons work on Windows Media Center without requiring further set-up.
However, with MediaPortal further set-up is required. Start...
I have the One-for-All 7960, which is identical to the 7962, apart from lacking the "Smart Motion" control. Code 1272 is the...
Hello all!
Before tossing it in the trash i might just ask the community.
I got the old Microsoft ir receiver plugged in my Lenovo...
Logitech Unify range of product comes to mind since you can run up to 6 input devices from a single low profile Unify USB dongle. However I don't believe they offer a Unify remote.
Logitech Unify range of product comes to mind since you can run up to 6 input devices from a single low profile Unify USB dongle...
Can anyone recommend a decent 2.4GHz usb dongle remote that works well with MP? A nice keyboard (with built in mouse trackpad) that...
This is really giving me grief.....
I have 2 original MCE remotes with the 4 coloured buttons works 100%. But I have 5 clients
I cannot get them anymore so I have bought 2 Speedlinks SL6399. These are not compatible with MP but works fine in MCE... but with the keyboard plugin they are 99% useable so still not there yet
Next...
This is really giving me grief.....
I have 2 original MCE remotes with the 4 coloured buttons works 100%. But I have 5 clients...
This is really giving me grief.....
I have 2 original MCE remotes with the 4 coloured buttons works 100%. But I have 5 clients...
what i want to now is if the remote works with the same infrared codes for left, right, up, down keyboard and the mouse, and the button for the switch between keyboard and mouse is controlled by hardware or software, and if it is by software can i set the default to the keyboard function and not the mouse, thanks
what i want to now is if the remote works with the same infrared codes for left, right, up, down keyboard and the mouse, and the...
i am thinking on buying a imon vfd but what i want to now is if i can learn in another remote the navigations key only(left, right...
No problem for IMon VFD + MCE Remote (except that you have to install the MCE receiver, since the IMon Receiver won't understand MCE IR)
No problem for IMon VFD + MCE Remote (except that you have to install the MCE receiver, since the IMon Receiver won't understand...
I am planning to build an HTPC around the Silverstone LC14M.
This case has an IMON VFD built-in and is delivered with a remote.
I...
^ agree with above suggestion, I have one too although it looks different it is an HP MCE clone remote. Buy on ebay with free shipping from HK. approx $15 USD incl P&P.
As per the sticked thread
https://forum.team-mediaportal.com/threads/recommended-remotes-receivers-for-mediaportal.120528/
^ agree with above suggestion, I have one too although it looks different it is an HP MCE clone remote. Buy on ebay with free...
Hi,
I am looking for a cheap remote control for a Mediaportal Client that just works without any configuration (I did try an...
For all of you that have built your own HTPC, I'd like to know what the best COLOUR PROGRAMMABLE LCD is that's supported by miniDisplay, if any. If not, has anyone bought one that has an API so I can write my own plugin? I want it to be colour, programmable, fit in a 5.25" bay and be clear to read at 10 feet or so. Currently, I...
For all of you that have built your own HTPC, I'd like to know what the best COLOUR PROGRAMMABLE LCD is that's supported by...
For all of you that have built your own HTPC, I'd like to know what the best COLOUR PROGRAMMABLE LCD is that's supported by...
I re-tried to get it working yesterday with no success....
only curious thing is that it works when I set mp to
"SHOW LAST ACTIVE MODULE WHEN RESUMING from standby"
but when I do this my fanarthandler at the start screen doesnt load and no pictures shows - plus MP hangs at start for around 3-5 sec
To me it seems that MP loses the...
I re-tried to get it working yesterday with no success....
only curious thing is that it works when I set mp to
"SHOW LAST ACTIVE...
Hey guys.
I already postet this in german forum but I try again to find help at this place.
When my HTPC (P8h67-I Mobo , RC6 IR...
Has anybody heard of the aitech mce presentation remote.
I have this remote and it works well with mce, it has all the correct mp buttons and a built in mouse,
i have read online and this remote requires no drivers, i guess its a plug and play remote.
Any idead how to set up for media portal?
Please help..
Has anybody heard of the aitech mce presentation remote.
I have this remote and it works well with mce, it has all the correct...
Has anybody heard of the aitech mce presentation remote.
I have this remote and it works well with mce, it has all the correct...
Now my Emprex 3009ARF has died I'm looking for another RF remote but there doesn't seem to be anything.
http://www.emprex.com/01_news_02.php?newsid=98
I actually thought I had the superior URF, which is discontinued. I could get another ARF but whilst it worked OK with my present room layout I'm going to be re-arranging soon and...
Now my Emprex 3009ARF has died I'm looking for another RF remote but there doesn't seem to be anything...
Now my Emprex 3009ARF has died I'm looking for another RF remote but there doesn't seem to be anything...
Hi Paranoid,
I am aware of your proposed remote. Unfortunately it has no display to select music without switching the TV on.
Hi Paranoid,
I am aware of your proposed remote. Unfortunately it has no display to select music without switching the TV on.
Hi there,
I am looking for a remote for my MP running on Vista. I stumbled over the Philips SRM7500. What I like reading the...
Thanks for your answer!
Well, I think that I'm going to get another model...
Thanks for your answer!
Well, I think that I'm going to get another model...
Hello,
I've been digging into the forum looking for information for this remote sold on ebay:
Media Center MCE PC HTPC IR...
Done, works a treat.
Thankyou!
Done, works a treat.
Thankyou!
Hi to all,
I am looking for the Microsoft mce remote control with the teletext buttons on it but i didnt found any one in the...
have you got the cable from the botton on the front connected into the back of the VFD or is is directly in the motherboard?
have you got the cable from the botton on the front connected into the back of the VFD or is is directly in the motherboard?
Although there are a few threads on the Antec Fusion 430 case, I haven't found any concrete answers as to whether or not the...
Also in minidisplay set it to turn off display when not running
Also in minidisplay set it to turn off display when not running
Hello Community,
Right now I am eagerly awaiting the arrival of my new htpc components...
HI,
today i've buyed an mce compatible remote controller, so i've solved all the problem...
If someone need a good and cheapest remote ( for european people, about 29 euro ) look here : AUDIO VIDEO | PLASMA WALL BRACKET LCD SUPPORTS FLOOR STANDS | REMOTE CONTROL GUMBODY
Thank to all.
Regards guys
HI,
today i've buyed an mce compatible remote controller, so i've solved all the problem...
If someone need a good and cheapest...
Hi at all,
i need some help...
I can't configure my remote RM100 for Mediaportal, some key dosen't work.( menu, back, go )...
Nobody ? :wtf:
Nobody ? :wtf:
Hi,
I would like to know if this display works with Mediaportal Caseking.de » Media PC » Multimedia-Panel » Antec Veris Elite...
That's what they do. They are just mini wireless keyboard.
That's what they do. They are just mini wireless keyboard.
Hi guys. I have had a little read through the forum and the posts I have come across seem a year or two old and I had wondered if...
After watching some AVGN videos I just had to play some old NES/SNES games, so I fired up an emulator and it works well, but using a keyboard takes away alot of the good feeling so I'm looking for a good wireless controller I can use, is there anyone that can recomend one?
After watching some AVGN videos I just had to play some old NES/SNES games, so I fired up an emulator and it works well, but using...
After watching some AVGN videos I just had to play some old NES/SNES games, so I fired up an emulator and it works well, but using...
You don't have to remap anything. Just leave the default settings, go to remote -> general hid -> use general hid device ->ok
All the buttons at the top of your dinovo should work now accept the "back" button.
In "keys & sounds" -> global actions -> previous menu(10) I've tried to map the back button. But when using this in MP the...
You don't have to remap anything. Just leave the default settings, go to remote -> general hid -> use general hid device ->ok
All...
I have remapped some of my keys on my Dinovo Mini but can't assign the action keys at the top of the keyboard to successfully do...
Hi there,
I am looking for a VFD or small LCD that can sit on top of my TV and show some generic information through one of the available VFD plugins. As i have hidden the actual HTPC away from the TV i need this VFD to communicate using bluetooth, or some other type of wireless comms. I have looked high and low but haven't found...
Hi there,
I am looking for a VFD or small LCD that can sit on top of my TV and show some generic information through one of the...
Hi there,
I am looking for a VFD or small LCD that can sit on top of my TV and show some generic information through one of the...
Hi,
last 2 days i installed media portal on my new build htpc and i like it really really much :)
i also tried to map my remote control (comes with the technisat skystar 2 dvb-s card) with eventghost and the message plugin (a lot of threads out there) and it worked. BUT there are not enough keys for all functions... so i have to buy...
Hi,
last 2 days i installed media portal on my new build htpc and i like it really really much :)
i also tried to map my remote...
Hi,
last 2 days i installed media portal on my new build htpc and i like it really really much :)
i also tried to map my remote...
I've been looking for a perfect solution for keyboard/mouse for my HTPC setup for a while, but i can't seem to find anything that satisfy me. What i really like is for instance this pack from Asus, but afaik, it's not available with Scandinavian layout:
The key features will be a minimalistic design, in other words: no numpad...
I've been looking for a perfect solution for keyboard/mouse for my HTPC setup for a while, but i can't seem to find anything that...
I've been looking for a perfect solution for keyboard/mouse for my HTPC setup for a while, but i can't seem to find anything that...
Hi! I have an USB Asus PC-RC01-D Remote control It comes with asus WiFi-TV card, and in system shows as two HID devices - keyboard and mouse. Under XP SP3 in windows media center (or on win7 for examlpe) this remote works without any drivers and all buttons are works exactly they are named. This device shows as a Several HID devices -...
Hi! I have an USB Asus PC-RC01-D Remote control It comes with asus WiFi-TV card, and in system shows as two HID devices - keyboard...
Hi! I have an USB Asus PC-RC01-D Remote control It comes with asus WiFi-TV card, and in system shows as two HID devices - keyboard...
RW S/W crashing? Yes...
Happens to me too, ATI software just dies. I tried updating the driver as MS Update suggested but that was even worse.
I ended up buying a Hauppauge HVR-1300 which included IR remote but now MP crashes whenever it is enabled...
If anybody knows, I'd too appreciate hints about the ATI software and would...
RW S/W crashing? Yes...
Happens to me too, ATI software just dies. I tried updating the driver as MS Update suggested but that was...
I've tried to use the ATI Remote Wonder with Mediaportal 0.1.3 - no plugin installed. The few buttons I use to navigate work fine...
Hi,
My Yamaha sound system (Reciever) volume control seem to be teh same ir control as my hauppauge hvr-900HD change channel IR code, which means that I've to change channel in order to change the volume.
My remote is a logitech harmony 515 universal remote.
ANy suggestions how to fix this problem?
Hi,
My Yamaha sound system (Reciever) volume control seem to be teh same ir control as my hauppauge hvr-900HD change channel IR...
Hi,
My Yamaha sound system (Reciever) volume control seem to be teh same ir control as my hauppauge hvr-900HD change channel IR...
Hi all,
I don't usually pimp products, but after the pain I went through with who knows how many iMon setups and even a pretty damn expensive Harmony 1000 which eventually died, I figured I'd share this find to spread the love.
I'm not affiliated with whoever wrote this app in any way, but great work deserves to be shared...
Hi all,
I don't usually pimp products, but after the pain I went through with who knows how many iMon setups and even a pretty...
Hi all,
I don't usually pimp products, but after the pain I went through with who knows how many iMon setups and even a pretty...
I've got my Harmony One configured as a Microsoft Media Center remote and then within MediaPortal's configuration I've chosen Media Center as the remote and everything seems to work fine for me.
I've got my Harmony One configured as a Microsoft Media Center remote and then within MediaPortal's configuration I've chosen Media...
Hi, I have set up my Harmony One remote as a media portal device in the Harmony Remote Software.
It gives me the option of using...