Ok update time lol..........
Have managed to get it working ish !! It is now showing the volume ( stuck on full ? ) and now shows DM-140 mini etc when i test on MP. Not sure the volume being stuck on full is normal ??
Is there a way to update the driver for this ?? Or configure it etc ?
Cheers
Ok update time lol..........
Have managed to get it working ish !! It is now showing the volume ( stuck on full ? ) and now shows...
Hi all,
New to the forums here and MP which is cool by the way !!! I have a real problem with the VFD panel on my MSI live media...
i use the serialport remote use an old tvcard remote with winlirc only 5 euro ! and it works great and easy to bold
hacknmod.com/hack/how-to-build-a-serial-port-infrared-receiver
i use the serialport remote use an old tvcard remote with winlirc only 5 euro ! and it works great and easy to bold...
Hi all,
Because my Logitech remote is crapping out all the time (which is seriously annoying as you might expect ;))
I posted a...
Hi everyone,
I have a Giada Mini PC i30, and I configured Media Portal, but I have a problem with remote control,
Only works the tipical keys like arrows, but no works the other keys like STOP;PLAY;BACKMENU,etc....
In theory this remote control is compatible with Media Center Edition....but no with Media Portal??
Please I need...
Hi everyone,
I have a Giada Mini PC i30, and I configured Media Portal, but I have a problem with remote control,
Only works the...
Hi everyone,
I have a Giada Mini PC i30, and I configured Media Portal, but I have a problem with remote control,
Only works the...
I'm pretty sure imon uses a different protocol (RC5 vs RC6) so they wont be compatible. (Unless soundgraph have since changed their IR protocol, but this was the case with my silverstone lc16-m with imon inside)
I'm pretty sure imon uses a different protocol (RC5 vs RC6) so they wont be compatible. (Unless soundgraph have since changed their...
Hey guys,
merry xmas !
Im using Mediaportal 1.2.1 on Windows 7. My Soundgraph VFD in my antec fusion v2 case ist my IR Receiver...
The reciever sits in the case. I am not sure where, but there is a good chance it's part of the LED-screen And you can connect it to the motherboard inside the case so that you don't have to pull a cable out the expansion slots ot fanholes. As you can see further down on that page there is alot of cables from the front that needs...
The reciever sits in the case. I am not sure where, but there is a good chance it's part of the LED-screen And you can connect it...
This is my first post here, so Hi All :thx:
So, im planning to build a HTPC and already have all the needed hardware. My main...
p.s.
in order to configure MPC, I used this list of Keyboard shortcuts used to control Media Center:
Windows Media Center keyboard shortcuts
And just configured them in MPC (e.g. CTRL+SHIFT+P to PLAY)
p.s.
in order to configure MPC, I used this list of Keyboard shortcuts used to control Media Center:
Windows Media Center keyboard...
Hi,
I would like to buy the Sunwave SMR-140 remote, mainly because of its mouse functionality, but I'm not sure it will actually...
see if you can get the european remote, which has 4 extra teletext coloured buttons, which are very useful and do have functions within MP (like red = fullscreen).
see if you can get the european remote, which has 4 extra teletext coloured buttons, which are very useful and do have functions...
I haven't found a direct answer, does the vista MCE remote work with Windows XP?
http://www.xpcgear.com/remotevista.html
URC-100
I'd recommend the URC-100. This is a nice RF + IR remote that can do 8 devices, and fully learnable (plus JTAG interface!), with over 40 keys. There's a very good discussion of this remote (and its bigger brothers) at
http://www.remotecentral.com/urcseries/
For the RF portion to work, you need to buy the MRF-100A RF...
URC-100
I'd recommend the URC-100. This is a nice RF + IR remote that can do 8 devices, and fully learnable (plus JTAG...
I need an RF remote as my HTPC is hidden and I don’t want to walk in to the next room to change channel. Can anyone recommend a...
I am using HP MCE Remote with blaster ($17USD delivered on ebay from hong kong)
This works with XP Pro SP3 + MP without needing any drivers or MP plugins installed
HP MCE KIT REMOTE CONTROL/USB IR RECEIVER/EMITTER VISTA - eBay (item 140366011715 end time Dec-10-09 20:34:13 PST)
However the remote will not work with IRSS or HIP.
The...
I am using HP MCE Remote with blaster ($17USD delivered on ebay from hong kong)
This works with XP Pro SP3 + MP without needing any...
Hi,
I use a Harmony 515 universal remote to control mediaportal (simulates an hauppauge 45 button remote control) in the tv-server...
Hey hioctane,
Thanks for that speedy reply. I don't think the wake up will be too much of an issue as I have a WOL app for my iPhone if I get too lazy to press the power button! Lol
What do I need to download and is the configuration tricky?
Thanks
Langers
I have installed IRSS and chose the MCE profile and no joy. Please...
Hey hioctane,
Thanks for that speedy reply. I don't think the wake up will be too much of an issue as I have a WOL app for my...
Hi Guys,
First off, I'm new here so go easy if you can (unless I'm being a total douche!!) I would also like to take this...
Hello every one
I know most of you love VLC and want to know how to get it to run in media portal with out a keyboard or having to manually exit out of VLC back to media portal. Try this it takes it takes some added pieces of hardware but it works really well. A skilled MSC 400 programmer would help.
Pieces required...
Hello every one
I know most of you love VLC and want to know how to get it to run in media portal with out a keyboard or...
Hello every one
I know most of you love VLC and want to know how to get it to run in media portal with out a keyboard or...
Hi, I have an xbox 360 universal media remote which seems pretty good for Mediaportal (given the price). I am using it with my old MS MCE RC6 IR receiver and OOB it works fine.
However, there are a few buttons on it that are not on the original remote and so don't seem to do anything in MP. I was wondering how I would map them? I...
Hi, I have an xbox 360 universal media remote which seems pretty good for Mediaportal (given the price). I am using it with my old...
Hi, I have an xbox 360 universal media remote which seems pretty good for Mediaportal (given the price). I am using it with my old...
Logitech Unify range of product comes to mind since you can run up to 6 input devices from a single low profile Unify USB dongle. However I don't believe they offer a Unify remote.
Logitech Unify range of product comes to mind since you can run up to 6 input devices from a single low profile Unify USB dongle...
Can anyone recommend a decent 2.4GHz usb dongle remote that works well with MP? A nice keyboard (with built in mouse trackpad) that...
I have the One-for-All 7960, which is identical to the 7962, apart from lacking the "Smart Motion" control. Code 1272 is the correct one to use. With my Microsoft-compatible Dell IR receiver, all buttons work on Windows Media Center without requiring further set-up.
However, with MediaPortal further set-up is required. Start...
I have the One-for-All 7960, which is identical to the 7962, apart from lacking the "Smart Motion" control. Code 1272 is the...
Hello all!
Before tossing it in the trash i might just ask the community.
I got the old Microsoft ir receiver plugged in my Lenovo...
HI,
today i've buyed an mce compatible remote controller, so i've solved all the problem...
If someone need a good and cheapest remote ( for european people, about 29 euro ) look here : AUDIO VIDEO | PLASMA WALL BRACKET LCD SUPPORTS FLOOR STANDS | REMOTE CONTROL GUMBODY
Thank to all.
Regards guys
HI,
today i've buyed an mce compatible remote controller, so i've solved all the problem...
If someone need a good and cheapest...
Hi at all,
i need some help...
I can't configure my remote RM100 for Mediaportal, some key dosen't work.( menu, back, go )...
Some links to remote
http://www.realvnc.com
http://ultravnc.sourceforge.net
http://www.dameware.com
http://www.famatech.com
http://www.tightvnc.com
http://www.netremote.org/
Some links to remote
http://www.realvnc.com
http://ultravnc.sourceforge.net
http://www.dameware.com
http://www.famatech.com...
Hi all - I'm a bit new to this Media Portal but so far i'm very impressed - Hats off to everyone involved.
I've got a dedicated...
what i want to now is if the remote works with the same infrared codes for left, right, up, down keyboard and the mouse, and the button for the switch between keyboard and mouse is controlled by hardware or software, and if it is by software can i set the default to the keyboard function and not the mouse, thanks
what i want to now is if the remote works with the same infrared codes for left, right, up, down keyboard and the mouse, and the...
i am thinking on buying a imon vfd but what i want to now is if i can learn in another remote the navigations key only(left, right...
I would suggest biting the bullet and just going with the MS MCE 2005 (European) remote. I don't know a lot about the Tira, but the MCE remote should have all the reciever functions and you also get the blasters and the remote itself. In Australia it's pretty cheap so I guess it would be in other countries too.
I would suggest biting the bullet and just going with the MS MCE 2005 (European) remote. I don't know a lot about the Tira, but...
Since upgrading to WinXP a while ago I can not get my TIRA-2 to work at all. Since they have no support I'm giving up and going...
I highly recommend the MS MCE2005 remote, too. I am using the "US" one and it has the added advantage of back-lit keys, which is ideal for a dark home theatre... 8)
I highly recommend the MS MCE2005 remote, too. I am using the "US" one and it has the added advantage of back-lit keys, which is...
Anyone have any info that lists pros/cons of different remotes with htpc's/MP. I am waiting on the delivery of my Twinhan 102g and...
I have one of these keyboard and mouse setups as well. Been using it for a few months (independant of MP); In general I like it although I wish that the pointing device were contained in the keyboard in the form of a pointing stick or pad or trackball.
I have one of these keyboard and mouse setups as well. Been using it for a few months (independant of MP); In general I like it...
I just picked up this Gyration Cordless Optical Mouse and Comapct Keyboard Suite. I am hoping to use this with Media Portal. Do any...
Hi,please have a look here: https://forum.team-mediaportal.com/332682-post3.html ...that should help you configuring your remote even if you don't have an Imon VFD/LCD display.
Hi,please have a look here: https://forum.team-mediaportal.com/332682-post3.html ...that should help you configuring your remote...
Hello i have a question i have a monueal htpc with a imon pad remote but i don`t know how to configure this will someone please...
Yes I've ordered the antec case. I bought one before and managed to make it work. I created the shortcuts by hand. (bind button to keyboard shortcut). Probably not the best way but it works perfectly :). ((in vista)).
If the reception of the case isn't sufficient what would be the best way to increase it?
I did the following with...
Yes I've ordered the antec case. I bought one before and managed to make it work. I created the shortcuts by hand. (bind button to...
I want a remote that can do it all. htpc / av receiver / tv
What would you suggest?