I've upgraded to 1.2A now, so I've run the test. I left everything on default (2 virtual users, tune delay 1000). I can't get a lot of channels due to a rubbish aerial, and in 1.1.2 I'd get a lot of TVservice stops when tuning into weak signals and I didn't get any of that running this test, so it looks like some improvements have...
I've upgraded to 1.2A now, so I've run the test. I left everything on default (2 virtual users, tune delay 1000). I can't get a lot...
Have you ever wondered about just how stable your setup is when it comes to tuning channels, then this addition might just be for...
Bump mm1352000.
Don't know how the development is going on and if the switch to git is near.
But what about including your latest speed improvements in analog radio?
Thank you!
sdf
Bump mm1352000.
Don't know how the development is going on and if the switch to git is near.
But what about including your latest...
MediaPortal Version: svn 27432
New problems in analog radio in latest svn (at least from 272xx).
Now when changing channels...
How about one setting that controls the scan division and another setting that controls the size of the jumps?
Scan division sizes: 0.05, 0.1, 0.2 MHz
Jump sizes: None, 0.05, 0.1, 0.2, 0.3, 0.4 MHz
That would be perfect
Bye,
sdf
How about one setting that controls the scan division and another setting that controls the size of the jumps?
Scan division...
when scanning analog radio, if MP finds a station, the scanning jumps 0.4 Mhz.
In Italy there are several stations between 0.10...
It works here on Windows 7 64-bit. Which SVN-version are you currently on? And do you use BASS player or the built-in player?
And...how about some logs ;)
It works here on Windows 7 64-bit. Which SVN-version are you currently on? And do you use BASS player or the built-in player...
MediaPortal Version: 1.2 svn
MediaPortal Skin: maya
Windows Version: vista 32 bit
CPU Type: atom 330
HDD: seagate 1.5 TB...
Yep, everythings working normally again with 10.12, so please mark this No Bug.
EDIT: within minutes of posting this, I got another BSOD with ati2dvag, so clearly I haven't found the problem yet! I only downgraded the actual driver (of which ati2dvag is a part), but I'll have to try downgrading the SB driver and CCC as well. I...
Yep, everythings working normally again with 10.12, so please mark this No Bug.
EDIT: within minutes of posting this, I got...
MediaPortal Version: v1.2A
MediaPortal Skin: StreamedMP
Windows Version: XP Pro SP3
CPU Type: Athlon II X4 630
HDD: 640GB WD...
AW: CAM support for Unicam is failing (TVServer)
the DD-Config tool allows to assign all available CAMs to all available tuners. It is not a feature of MP, but of the DigitalDevices device driver
Frank
AW: CAM support for Unicam is failing (TVServer)
the DD-Config tool allows to assign all available CAMs to all available tuners...
Hello,
MP 1.2.0 and 1.1.0 using DigitalDevices CI-interface with a VIAccess CAM is working properly on VIAccess encrypted...
When I first installed 1.2 Alpha, I could bitstream videos and movies with the internal player. I chose to use the internal player due to smoother non-jitter playback. For some unknown reason, it just stopped bitstreaming, and defaults to PCM. I can still bitstream using MPC-HC, and Windows media player, so it must be something...
When I first installed 1.2 Alpha, I could bitstream videos and movies with the internal player. I chose to use the internal player...
When I first installed 1.2 Alpha, I could bitstream videos and movies with the internal player. I chose to use the internal player...
According to https://forum.team-mediaportal.com/general-support-51/record-radio-webstream-75568/ you can't record from a webstream (using the virtual RadioWebStream Card) since this feature was never finished.
How about picking this feature up?
You can set up timeshifting and recording paths for this virtual card, but you can't...
According to https://forum.team-mediaportal.com/general-support-51/record-radio-webstream-75568/ you can't record from a webstream...
According to https://forum.team-mediaportal.com/general-support-51/record-radio-webstream-75568/ you can't record from a webstream...
Hello MM.
I'm using latest driver package, version 5.7. Don't know why they shows up as version 5.0. Have always used 5.7. I'm also using latest FirmWare.
I have to leave home for the next seven days today, for work. Can do some more testing when I return back home next Tuesday.
A
Hello MM.
I'm using latest driver package, version 5.7. Don't know why they shows up as version 5.0. Have always used 5.7. I'm...
I can't scan any DVB-S2 channels with my DigitalEverywhere FloppyDTV S2 card. This problem occurred after I made a fresh install...
Thanks for sharing the solution :)
That is not a code issue. It is up to the driver to support that function. If it doesn't support it then there is nothing that the MediaPortal team can do. Upgrading the drivers *might* help (the driver developer might fix bugs or change something that allows support for pausing the graph in later...
Thanks for sharing the solution :)
That is not a code issue. It is up to the driver to support that function. If it doesn't...
MediaPortal Version: 1.2.0 (26893)
MediaPortal Skin: Maya
Windows Version: Windows7 64-Bit
CPU Type: Intel Core i5-750
HDD...
Hi Musicman62
I have just installed 1.1.1 and tested it. I have been running into a similar problem. I did some test recordings (manuel recordings) and could only delet a few, then I run into the similar probelm "error could not delete recording". However, it was not an active recording, I just started the recorded TV to see what...
Hi Musicman62
I have just installed 1.1.1 and tested it. I have been running into a similar problem. I did some test recordings...
MediaPortal Version: 1.2.0.0 Alpha
MediaPortal Skin: StreamedMP
Windows Version: XP MCE SP3
CPU Type: AMD Athlon 64X2 (690)...
Right, to answer my own question:
There is a bug in the settings, we save to gui -> language but MediaPortal reads from skin -> language:
https://forum.team-mediaportal.com/submit-code-patches-mediaportal-tv-server-etc-325/changing-language-mediaportal-configuration-does-not-change-language-93142/#post710918
Right, to answer my own question:
There is a bug in the settings, we save to gui -> language but MediaPortal reads from skin ->...
Running latest SVN, I did some tests that required me to change the language.
I changed it in MP Config, but when I start...
Great thanks.
Problem is solved. When scanning the ip channels they are found but when trying to tune them the error is "channel not mapped to any card"
The ip channels are not encrypted but when tuning they are categorized as being just that. by editing the channel and specifying it as being Free to air it starts working :)...
Great thanks.
Problem is solved. When scanning the ip channels they are found but when trying to tune them the error is "channel...
Unable to tune DVB-IP channels after this commit, if the 5 files are rolled back in latest svn DVB-IP works again.
Some logs...
AW: Context menu issue
This happens since ages when the skin xmls are read again when changing fullscreen/windowed mode or (in my case) using MyRefresh (as a skinner I do that always :D)
I think it´s nothing to worry about ;)
AW: Context menu issue
This happens since ages when the skin xmls are read again when changing fullscreen/windowed mode or (in my...
Hi guys
Minor bug to report in the latest SVN builds of MediaPortal. On changing between full screen mode and windowed mode I'm...
The fixes that Andy submitted recently (viewport-issue and addition of masking in thumbnails and filmstrip) have cured the issue for me. So...this should be fixed whenever 1.2.0 Beta is released. Or in recent SVN versions.
The fixes that Andy submitted recently (viewport-issue and addition of masking in thumbnails and filmstrip) have cured the issue...
Hi
Running SVN 26565 in both Windows 7 and XP shows coverflow with covers upside down in Blue3Wide. Maybe you already know this...
Hi,
I know that 1.2.0 is currently in feature freeze but I would just like to ask the dev team to consider the following patch 0003309: Enable camera positioning and implement on coverflow and group controls - MediaPortal Bugtracker concerning altering the viewpoint for the coverflow view developed by ajp8164 to be implemented for...
Hi,
I know that 1.2.0 is currently in feature freeze but I would just like to ask the dev team to consider the following patch...
Hi,
I know that 1.2.0 is currently in feature freeze but I would just like to ask the dev team to consider the following patch...
Hi there,
I'm sure this has been covered in this thread (about the less than ideal way coverflow draws the screen - my simple terminolgy), but under normal usage of my HTPC coverflow seems ok for my collection of music (not that many albums - I used shares view), but when I connect to my HTPC via RDP (for admin/testing purposes) it...
Hi there,
I'm sure this has been covered in this thread (about the less than ideal way coverflow draws the screen - my simple...
MediaPortal Version: 1.2 alpha svn
MediaPortal Skin: Black Glass
Windows Version: WinXP SP3
CPU Type: AMD X2 3,8 GHz
HDD: WD 300 GB...