Also I have the same problem.
DVB-S2 card + Cyberlink H.264 + AnyDVD-HD.
AstraHD_Promo MPEG2 is OK but AstraHD_Promo H.264 don't play (black screen).
DVBViewer3.6 play H.264 channel.
Also with BlurayDisk it doesn't work. It show error "Insert Disk".
(PowerDVD7.3ultra play BD correctly)
sv (sorry 4 my english)
Also I have the same problem.
DVB-S2 card + Cyberlink H.264 + AnyDVD-HD.
AstraHD_Promo MPEG2 is OK but AstraHD_Promo H.264...
Hi,
Is-it possible to see a channel encode in H264 but not encrypted with MP ? (canal plus sport in evening).
Thanks
Hi all,
Here is what I found working wrt codec etc to improve picture quality, in particular for sports:
- Use ATI Avivo codec for MPEG2
- Use Cyberlink PDVD for h264
- Make sure "wait for v-sync" is enabled
- Calibrate refresh rate to be a multiple of 25HZ, i.e. 50Hz or 75Hz
- Set ffdshow raw filter as post-processor (unfortunatly...
Hi all,
Here is what I found working wrt codec etc to improve picture quality, in particular for sports:
- Use ATI Avivo codec...
what codecs do you guys use for watching tv with minimal quality-loss and what settings for the codec do you use??
I think the...
The above mentioned STB has two tuners. The second tuner can only be controlled via RF. Is there any way I can get the MCE replacement plugin for Either TVE2 or TVE3 to control the second tuner? I need to be able to "wake" it for recordings.(as mentioned above) I saw in this post...
The above mentioned STB has two tuners. The second tuner can only be controlled via RF. Is there any way I can get the MCE...
I have a Dish Network 322 STB its connected to my ATI 650 via s-video. The STB goes into a "screen saver mode"after x amount of...
Well, I have the answers now.
For some reason the tooltips for the plugins are not shown in my HTPC, so I did not realize they exist...
From the tooltips along with frodo's documented source code files, it is quite clear what it does. It also partialy explains why it was so confusing when I tried to figure it out by experiments...
Well, I have the answers now.
For some reason the tooltips for the plugins are not shown in my HTPC, so I did not realize they...
Hi,
What will happen when the quota limit defined in "Television->Recording->Disk Quota" is reached?
Which recording will be...
Hi, I added those options. The newest vmr9 settings change the resizing algorithm to take advantage of your underlying video hardware. Your results may vary. Ideally, you should turn on non-square mixing and choose gaussian quad filter. There is currently not any checking to make sure your video card can actually implement the...
Hi, I added those options. The newest vmr9 settings change the resizing algorithm to take advantage of your underlying video...
Does anyone notice ant difference within MP when playing with antialiasing / anisotropic filtering?
Kev.
The MCE Standy Tool ( MST ) could help you with the reinit of the card without using the TVServer3.
Got a SkystarHD which is hardwarewise similar to the TT3200, i am using the TT3200 driver for it.
Since i can not get it to work proper with the latest TVS3 i am playin around with the build in TVS2.
This works really nice for now -...
The MCE Standy Tool ( MST ) could help you with the reinit of the card without using the TVServer3.
Got a SkystarHD which is...
Hi, i have a problem with all my TV card (TT S2-3200 / Jepssen Hybrid)
They don't work after standby (S3/S4).
I must to restart...
hi,
does someone have problems using the pvr scheduler (1.6.8) with the newest MP SVN´s and vista? my machine does not autostandby anymore .... after a recording it does but not after idle time...
i hope someone could test this ...
bye
wunschkind
hi,
does someone have problems using the pvr scheduler (1.6.8) with the newest MP SVN´s and vista? my machine does not...
My TV - Engine 0.2
TV Card - TT S2-3200
S/O WinXP MCE2005 Edition
Problem: Resume from Standby
Do you know this external...
found it:
<control>
<description>template for program title light area</description>
<type>label</type>
<id>24</id>
<visible>no</visible>
<label>-</label>
<font>font13</font>
<textcolor>FFFFFFFF</textcolor>
<animation effect="fade" time="250">WindowOpen</animation>...
found it:
<control>
<description>template for program title light area</description>
<type>label</type>...
Hey,
I've got a widescreen 32" TV and when viewing TV guide I have hard time reading TV guide due to the fact that it displays...
Just register the filter (by clicking the file 'register_Sky2PCAVSrc.bat' included in the compressed archive), and select skystar2 card on the configuration dialog of MP.
Just register the filter (by clicking the file 'register_Sky2PCAVSrc.bat' included in the compressed archive), and select skystar2...
Helo
In my previus post i write abaut NV GF 440MX Vivo .
Now I have new problem with DVB-S card Pinnaacle Studio PCTV 400i in...
I think there's a list of the specs of both cards on the leadtek site. From what I remember, there werent any massively significant differences. I use the S, and have no real problems with it. Sometimes MP TV Engine 0.2 seems to have a problem where it says the card is in use, although it isnt, but a restart of MP fixes that...
I think there's a list of the specs of both cards on the leadtek site. From what I remember, there werent any massively significant...
Sorry if this is a dumb question, I've searched through the forums and cant find any answer. Is it possible to get the leadtek...
Glad it is working for you now.
Just FYI, you should be able to delete the channels you are not interested in within
the MP configuration and not see them at all. Depending on how you have
things setup you may also need to remove them from your SD lineup too.
patrick
Glad it is working for you now.
Just FYI, you should be able to delete the channels you are not interested in within
the MP...
First off, let me say I love this software so far... I started out with MythTV, but didn't understand linux so it was pretty much...
ok, the flickering has stopped. So this thread can be closed :)
I can now play MPEG2, XVID, DIVX perfectly. However, VC-1, and H264 and WMV are still not ok...
ok, the flickering has stopped. So this thread can be closed :)
I can now play MPEG2, XVID, DIVX perfectly. However, VC-1, and...
I have a problem with some tv channels. Some don't have any sound. I noticed these channels are all multi stream audio channels...
My LCD-TV doesn't have a 720 line mode, so I'm not sure if forcing 720p50 is a good idea.
Since I had only installed the driver, I took advantage of the situation by installing the complete Catalyst suite 8.9.
I have also updated to MP 1.0 RC3. I am starting as close to the default settings and only changing them step by step.
So...
My LCD-TV doesn't have a 720 line mode, so I'm not sure if forcing 720p50 is a good idea.
Since I had only installed the driver, I...
I realized the analog TV (on the HTPC) is worse than without HTPC (just see the TV). I would like to make better quality. I waiting...
Hi Barry,
Don't be so quick to throw memory at the problem. I have only 512M of RAM in my system and even with 2 tuners recording while I'm watching a pre-recorded show, MP uses less than 250MB without any problems. As rtv said, your memory usage might be normal, but there appears to be a separate issue that's causing the...
Hi Barry,
Don't be so quick to throw memory at the problem. I have only 512M of RAM in my system and even with 2 tuners...
When I start using MY TV in MP the memory used by MP raises to over 350MBytes. My PC has 1GByte installed and when this happens it...
Thanks for the reply Flip,
I have tried the miniOSD you mentioned, however the wife has bad eyes and can't seem to read the text (yes she has glasses but refuses to wear them, while watching TV....). Maybe I have a case for getting a really big TV!
Being more realistic can the miniOSD be modified? Maybe reduce the # of channels...
Thanks for the reply Flip,
I have tried the miniOSD you mentioned, however the wife has bad eyes and can't seem to read the text...
I could have sworn myTV displayed a little pane on the lower portion of the screen which contained the synopsis of the show you...
MediaPortalDirs.xml is the clue.
it points to %ProgramData%\Team Media Portal\ etc., etc.
well, thats a hidden directory. so start your explorer, type %ProgramData% in the adress-field, and voila!
copy the thumbs there, and it works. admin-rights would be fine, btw.
so nn to reinstall
I have no idea how to access that...
MediaPortalDirs.xml is the clue.
it points to %ProgramData%\Team Media Portal\ etc., etc.
well, thats a hidden directory. so...
Hi
I´m testing RC3 on Vista partition
I've always installed TV logos with XP in folder c:\Program Files\Team...
@ Vertiger. Ok, well, that's a bit of a shame...but I've made an Improvement Suggestion anyway and I still hope somebody will pick it up soon :)
@ Paranoid Delusion, please read my first post carefully again :) I know this card priority function exists and it works great, but thats not what I asked for. We're talking about adding...
@ Vertiger. Ok, well, that's a bit of a shame...but I've made an Improvement Suggestion anyway and I still hope somebody will pick...
Hi guys, I have a bit of a problem...I think.
I have one dvb-c card (FloppyDTV) and a double analog card (PVR500). The available...
Same problem here, but only with recorded tv or when timeshifting. 16:9 material gets distorted to 4:3, not sure what happens to 4:3 material. Perhaps this problem is related?
Same problem here, but only with recorded tv or when timeshifting. 16:9 material gets distorted to 4:3, not sure what happens to...
Hi there , with latest SVN TV records and views are 576x576 instead of 720x576.
My 150MCE settings are correct in configuration...
Hi all, this is a copy from my post: (https://forum.team-mediaportal.com/showthread.php?p=104761#post104761)
"While I was testing SageTV I noticed that when I switch between cards, the buffer doesn’t get deleted. And also when I restart the computer after SageTV crashes (it crashed so many times v6) I can still watch the old...
Hi all, this is a copy from my post: (https://forum.team-mediaportal.com/showthread.php?p=104761#post104761)
"While I was...
Hi
I know this was well discussed in the past whether it is a good idea to have or not.
Would implementing an option in...