Dear all,
I don't know if it is the good place to post that... Correct me if I'm wrong...
I'm using a cinergy T2 board (DVB-T). Some chanels have multilangual broadcasts. I can see them and switch on them for some chanels, but not on all of them...
Using a software like pouvhinTV (http://pouchinteve.free.fr/) I can see both...
Dear all,
I don't know if it is the good place to post that... Correct me if I'm wrong...
I'm using a cinergy T2 board...
Dear all,
I don't know if it is the good place to post that... Correct me if I'm wrong...
I'm using a cinergy T2 board...
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I will not get a perfect aspect ratio, right?
Isn't there a general cropping option that crops the top/left/right/bottom all at once so that the proper aspect ratio is never lost?
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I...
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I...
I just wondering , if i change my little 13" tv in my home master room with a small-foot-print pc with a 22" LCD computer monitor with DVI connector , and use the media portal client , i have the same brightly resolution , like a TV quality?
** before that suppose i install the TV server in a another computer with all the specs and...
I just wondering , if i change my little 13" tv in my home master room with a small-foot-print pc with a 22" LCD computer monitor...
I just wondering , if i change my little 13" tv in my home master room with a small-foot-print pc with a 22" LCD computer monitor...
I am having some trouble following all the discussions, as I don't know as much about HDTV as I probably should. So I apologize if this has already been answered clearly.
Basically, my question is whether TV2 supports viewing and recording HDTV from a QAM tuner. (Specifically, I am thinking the Hauppauge HVR-1600 recording clear...
I am having some trouble following all the discussions, as I don't know as much about HDTV as I probably should. So I apologize if...
I am having some trouble following all the discussions, as I don't know as much about HDTV as I probably should. So I apologize if...
I'm a bit embarrased to ask this question but I really. really can't figure out how to control my tv with my mouse! :ooops:
Please, can someone tell me how to:
go up one channel
go down one channel
fast forward
rewind
use timeshift (drag/drop on position in timeshiftmode ??)
And all this with my mouse to controll my...
I'm a bit embarrased to ask this question but I really. really can't figure out how to control my tv with my mouse! :ooops...
I'm a bit embarrased to ask this question but I really. really can't figure out how to control my tv with my mouse! :ooops...
Hi,
I'm using latest svn (11.09.2007) and DVB-C drivers 5.0.0.2 beta for TT 1500-C card.
The card works normally in TVE2 but after hibernate and resume there are many errors in the logs and my scheduled recordings didn't start.
Please take a look on it, I have to decide within the next days if i keep these components...
Hi,
I'm using latest svn (11.09.2007) and DVB-C drivers 5.0.0.2 beta for TT 1500-C card.
The card works normally in TVE2 but...
Hi,
I'm using latest svn (11.09.2007) and DVB-C drivers 5.0.0.2 beta for TT 1500-C card.
The card works normally in TVE2 but...
I recently installed Windows Vista Business 64 bits on my new machine, but could not get my Hauppauge working. The card seems to be correctly installed (I tried with drivers "in-box" from Vista 64 and drivers from Hauppauge CD 4.1), I can see it in Configuration, but when I enter MyTV, the TV doesn't start. If I try to scan channels...
I recently installed Windows Vista Business 64 bits on my new machine, but could not get my Hauppauge working. The card seems to be...
I recently installed Windows Vista Business 64 bits on my new machine, but could not get my Hauppauge working. The card seems to be...
If I attempt to shutdown MP after watching MY TV the MediaPortal.exe program still shows in Task Manager. As mentioned in the previous question about memory footprint, it still consumes 350MBytes. The only way I can find to kill the process is by terminating it using Task Manager. Is this correct?
If I attempt to shutdown MP after watching MY TV the MediaPortal.exe program still shows in Task Manager. As mentioned in the...
If I attempt to shutdown MP after watching MY TV the MediaPortal.exe program still shows in Task Manager. As mentioned in the...
Hey,
I have an NTSC television in Europe. I'd like to hook up a SKY sat box (PAL) into my HTPC running media portal. I'm using a NTSC PVR-150 card, but I'm told that the RCA inputs should handle PAL (need SCART to RCS/phono adapter) and that only the RF input hits the NTSC tuner. The NTSC TV is hooked up via my AGP graphics card...
Hey,
I have an NTSC television in Europe. I'd like to hook up a SKY sat box (PAL) into my HTPC running media portal. I'm using a...
Hey,
I have an NTSC television in Europe. I'd like to hook up a SKY sat box (PAL) into my HTPC running media portal. I'm using a...
Last evening I noticed that one channel (RTL8) just dissappeared. I dit not change anything in my system. On my normal STB I still receive this channel. A re tune did not solve the problem. It just isn't found anymore.
Anyone any idea?
joost
Last evening I noticed that one channel (RTL8) just dissappeared. I dit not change anything in my system. On my normal STB I still...
Last evening I noticed that one channel (RTL8) just dissappeared. I dit not change anything in my system. On my normal STB I still...
Hi... Newbie here as you will see when reading this thing :-)
I have AIW X800GT and Artec T14 so AIW can do analog & digi and T14 if full digi usb dongel. So I have get analog to work (but we have no analog tv anymore, Finland end transmit start of this month) but how to get AIWs- and T14 digi to work with MediaPortal? ATI MMC 6.14...
Hi... Newbie here as you will see when reading this thing :-)
I have AIW X800GT and Artec T14 so AIW can do analog & digi and...
Hi... Newbie here as you will see when reading this thing :-)
I have AIW X800GT and Artec T14 so AIW can do analog & digi and...
Hope I have the right section here. If not, just tell me, or move the thread.
I finally got around to upgrading from 2.3.0 RC2 to RC3. I am too lazy to reconfigure all of my FM radio stations.
Is there some easy way to migrate these from my old RC2 installation?
With TV channels, you can backup to a ChannelList.XML file and...
Hope I have the right section here. If not, just tell me, or move the thread.
I finally got around to upgrading from 2.3.0 RC2 to...
Hope I have the right section here. If not, just tell me, or move the thread.
I finally got around to upgrading from 2.3.0 RC2 to...
Guess I posted in the wrong forum. I am re-starting the thread in the new-comers forum. Can some one please delete this thread.
Apologies for messing things up.
Guess I posted in the wrong forum. I am re-starting the thread in the new-comers forum. Can some one please delete this thread...
Guess I posted in the wrong forum. I am re-starting the thread in the new-comers forum. Can some one please delete this thread...
I was playing around last night with the VFD i have and decided to see what was displayed when a DVD was played. When I came back to the tv menu the tv and timeshift is off. I'm using 2.3.0rc2. Is this the way it's designed or is it a bug? If it's designed that way, can I turn it off?
Also, is 19 minutes the max pre and post...
I was playing around last night with the VFD i have and decided to see what was displayed when a DVD was played. When I came back...
I was playing around last night with the VFD i have and decided to see what was displayed when a DVD was played. When I came back...
Hello,
When using a 1920x1080 TV, the font used for Text TV is looking really small (and weird). Is it possible to change it? Does anyone know how this is handled?
Kind regards,
Tobias
Hello,
When using a 1920x1080 TV, the font used for Text TV is looking really small (and weird). Is it possible to change it...
Hello,
When using a 1920x1080 TV, the font used for Text TV is looking really small (and weird). Is it possible to change it...
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels are smushed into the same 4:3 ratio as the SD channels. If i manually change the ratio by selecting 'Stretch' it displays properly, but then all of the SD channels are stretched. I don't want to have to...
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels...
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels...
I use TVe2, and selected audio track is not saved after i change and will back to channel.
It is a bug or is not implemented yet?
I try manualy set it over SQLite Database Browser - tblDVBSMapping: sAudioPid & sAudioLang, but without any change.
+ MediaPortal_0.2.3.0_RC3_Setup.exe
+ MediaPortal-svn--11-06-2007--00-58-Rev16453.exe
I use TVe2, and selected audio track is not saved after i change and will back to channel.
It is a bug or is not implemented yet...
I use TVe2, and selected audio track is not saved after i change and will back to channel.
It is a bug or is not implemented yet...
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that actualy were grabbed during the cycle.
This leads to a continuous repeated grab routine for every existing channel that sees the cpu usage at max for low cpu systems for many hours.
For example 75 channels...
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that...
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that...
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it XYZ), and i can recive it from 3 different sources, how do i set this channel up.....
If i eg. can record the XYZ from both analoug antenna, DVB-s and DVB-t.....
It would be nice if i did not have to...
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it...
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it...
Hi everyone,
Media portal is great, and here is a suggestion to make it better (in my opinion).
I just managed to delete most of my tv recordings tonight. thanks to that lovely button called 'clean-up'. Now call me silly, but I thought that the clean up feature would only apply to the current folder/recordings I was viewing at...
Hi everyone,
Media portal is great, and here is a suggestion to make it better (in my opinion).
I just managed to delete...
Hi everyone,
Media portal is great, and here is a suggestion to make it better (in my opinion).
I just managed to delete...
Does someone can explain me exactly hox to scan Nimiq 1 satellite ?...
I tried many differents setting but no success... No channel detected and no signal at all.
My Twinhan 1020 card is correctly detected by mediaportal ... but no scan result ... What can I do ???
Thanks a lot
Does someone can explain me exactly hox to scan Nimiq 1 satellite ?...
I tried many differents setting but no success... No...
Does someone can explain me exactly hox to scan Nimiq 1 satellite ?...
I tried many differents setting but no success... No...
Is it possible to set up a recording for a programme that is not currently in the EPG?
I'm transferring the series recording details across from my MCE machine and there are a number which aren't being broadcast at the moment, but there doesn't appear to be a way to simply enter a keyword title and put it in the list without...
Is it possible to set up a recording for a programme that is not currently in the EPG?
I'm transferring the series recording...
Is it possible to set up a recording for a programme that is not currently in the EPG?
I'm transferring the series recording...
My Theatrix 650 card is loading two muxers for analog TV...
the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2 Multiplexer.
Demux connects to old Media Center Mux but still loads new avstream mux.
Also old MediaCenter Video Encoder is loading and connecting to old mux
AVStream Capture pin 0 ->old MCVidEnc ->...
My Theatrix 650 card is loading two muxers for analog TV...
the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2...
My Theatrix 650 card is loading two muxers for analog TV...
the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2...
I don't understand why I can't see which channels will be recorded in the scheduler / timer?!?
Only when I go in settings I can see the correct channel.
So the only thing I see is the name of the program that will be recorded.
Why is that?
I don't understand why I can't see which channels will be recorded in the scheduler / timer?!?
Only when I go in settings I can...
I don't understand why I can't see which channels will be recorded in the scheduler / timer?!?
Only when I go in settings I can...
I am new to posting on this forum so first of all, hello.
I am thinking about getting a PVR-150 and putting a HTPC in my living room (using MediaPortal). The only uncertain question i have is about getting the TV aspect of it working good. Okey, now is my situation. I am comcast cable and recently they have switched my whole area...
I am new to posting on this forum so first of all, hello.
I am thinking about getting a PVR-150 and putting a HTPC in my living...
I am new to posting on this forum so first of all, hello.
I am thinking about getting a PVR-150 and putting a HTPC in my living...
With TVe3 is not problem, but with TVe2 does.
I use BDA drivers, is it here problem? - or i have must install WDM drivers for TT S2-3200 (i usually get error in device manager [yellow triangle] if i try it,.. maybe SkyStar HD is not 100% same as TT S2-3200 as all of us think)?
Do anyone test it (Astra 19.2E+23.5E)?
I know, that HD...
With TVe3 is not problem, but with TVe2 does.
I use BDA drivers, is it here problem? - or i have must install WDM drivers for TT...
With TVe3 is not problem, but with TVe2 does.
I use BDA drivers, is it here problem? - or i have must install WDM drivers for TT...