MyTV - Engine 0.2 (3 Viewers)

General talk, support, improvement suggestions and tips & tricks

support (2 Viewers)

Got a problem with MediaPortals TV-Engine 0.2? Post it here!

Tips and Tricks (13 Viewers)

Post your Tips and Tricks in here.

improvement suggestions (1 Viewer)

Got an idea how the TV-Engine 0.2 can be improved? Post it here!
Try to enable hidden and system files...
Try to enable hidden and system files...
I'm running MPRC1 with SVN 15497 and was just wondering where the file is stored when you use the timeshift function? I noticed...
Replies
3
Views
2K
Embarrassing Thanks alot, it's a bit embarrassing taht i didn't find those plugins, eventhough i have been browsing the plugin section. Ill will try them out and see if it works for me. It could be nice though if´SleepTimer And Start in (Music/TV) was implemented in the core of MP. Thanks again!
Embarrassing Thanks alot, it's a bit embarrassing taht i didn't find those plugins, eventhough i have been browsing the plugin...
To perfect MediaPortal for different needs as a entertainment center in my house I have the following wishes for Christmas: My set...
Replies
2
Views
2K
Hello, When using a 1920x1080 TV, the font used for Text TV is looking really small (and weird). Is it possible to change it? Does anyone know how this is handled? Kind regards, Tobias
Hello, When using a 1920x1080 TV, the font used for Text TV is looking really small (and weird). Is it possible to change it...
Hello, When using a 1920x1080 TV, the font used for Text TV is looking really small (and weird). Is it possible to change it...
Replies
0
Views
1K
Ray, No I am an XP SP2 user with a PCI Nebula DVB-T card. Regards Richard.
Ray, No I am an XP SP2 user with a PCI Nebula DVB-T card. Regards Richard.
I have been through the tv wizard and got the tv signal working when i click into the tv section of media portal. This then brings...
Replies
7
Views
1K
Finaly incorporating DVR functionality into my HTPC/Mediaportal. Any suggestionson which cards or systems to buy? I figure I would go the IR Blaster route and keep the cable box, but anybody suggest going the analog basic cable/OTA HD route? Thanks!
Finaly incorporating DVR functionality into my HTPC/Mediaportal. Any suggestionson which cards or systems to buy? I figure I...
Finaly incorporating DVR functionality into my HTPC/Mediaportal. Any suggestionson which cards or systems to buy? I figure I...
Replies
0
Views
1K
Hi everyone, Media portal is great, and here is a suggestion to make it better (in my opinion). I just managed to delete most of my tv recordings tonight. thanks to that lovely button called 'clean-up'. Now call me silly, but I thought that the clean up feature would only apply to the current folder/recordings I was viewing at...
Hi everyone, Media portal is great, and here is a suggestion to make it better (in my opinion). I just managed to delete...
Hi everyone, Media portal is great, and here is a suggestion to make it better (in my opinion). I just managed to delete...
Replies
0
Views
1K
MP1 MP2 Streaming Live TV? DE
Many thanks! I was in work at the time and only skim read the Wiki article! I shall give it a go and see how I get on with it. Thanks for all your help :thx:
Many thanks! I was in work at the time and only skim read the Wiki article! I shall give it a go and see how I get on with it...
Hi all. I am looking for a way to have media portal stream live TV from one PC on my network to another. I currently have...
Replies
4
Views
2K
I already looked in te keyboard shortcut keys. there is nothing there for swithcing to the tv-guide
I already looked in te keyboard shortcut keys. there is nothing there for swithcing to the tv-guide
I was just wondering if it is possible to go straight to the tv-guide from MediaPortal-Home, instead of goin through MyTv and then...
Replies
5
Views
1K
Use TVE3. DMAN
Use TVE3. DMAN
Hi When I'm ZAPping encrypted channels with MP, the ZAP time is about 5 - 6 seconds. If I compare this with, for example...
Replies
6
Views
2K
Try TVE3 thats the focus TV solution at this time. DMAN
Try TVE3 thats the focus TV solution at this time. DMAN
Hi there, I have Media Portal and i get slow channel changing when i chang ethe channel on my DVB-T card. I was wondering...
Replies
13
Views
5K
Yeah! I thought so! I've just updated the graphic card, but still need to update the cpu. :) Though the new card is only directx 8.1 compatible.. Anyhow.. Well i can live a while longer with no tv through the mediastation :)
Yeah! I thought so! I've just updated the graphic card, but still need to update the cpu. :) Though the new card is only...
Hi! I had recently a problem there MP said "Unable to create graph" when I wanted to look at tv via MP. I have Pinnacle PCTV...
Replies
2
Views
1K
i tried the beta bda drivers from technisat, the vendor for skystar hd. not really an improvement, i do not get an error message any more, but the screen stays black. again i have to say, that in the bundeled tv viewer software the card is working as it should. even hd-channels are displayed only with little hickups (due to my...
i tried the beta bda drivers from technisat, the vendor for skystar hd. not really an improvement, i do not get an error message...
i recently bought a skystar hd which operates well with the bundeled tv software. in mp setup i can autoscan the astra/c...
Replies
4
Views
2K
If I attempt to shutdown MP after watching MY TV the MediaPortal.exe program still shows in Task Manager. As mentioned in the previous question about memory footprint, it still consumes 350MBytes. The only way I can find to kill the process is by terminating it using Task Manager. Is this correct?
If I attempt to shutdown MP after watching MY TV the MediaPortal.exe program still shows in Task Manager. As mentioned in the...
If I attempt to shutdown MP after watching MY TV the MediaPortal.exe program still shows in Task Manager. As mentioned in the...
Replies
0
Views
987
I use TVe2, and selected audio track is not saved after i change and will back to channel. It is a bug or is not implemented yet? I try manualy set it over SQLite Database Browser - tblDVBSMapping: sAudioPid & sAudioLang, but without any change. + MediaPortal_0.2.3.0_RC3_Setup.exe + MediaPortal-svn--11-06-2007--00-58-Rev16453.exe
I use TVe2, and selected audio track is not saved after i change and will back to channel. It is a bug or is not implemented yet...
I use TVe2, and selected audio track is not saved after i change and will back to channel. It is a bug or is not implemented yet...
Replies
0
Views
897
MP1 MP2 See DVB-T in H264 DE
Also I have the same problem. DVB-S2 card + Cyberlink H.264 + AnyDVD-HD. AstraHD_Promo MPEG2 is OK but AstraHD_Promo H.264 don't play (black screen). DVBViewer3.6 play H.264 channel. Also with BlurayDisk it doesn't work. It show error "Insert Disk". (PowerDVD7.3ultra play BD correctly) sv (sorry 4 my english)
Also I have the same problem. DVB-S2 card + Cyberlink H.264 + AnyDVD-HD. AstraHD_Promo MPEG2 is OK but AstraHD_Promo H.264...
Hi, Is-it possible to see a channel encode in H264 but not encrypted with MP ? (canal plus sport in evening). Thanks
Replies
22
Views
4K
Is it possible to set up a recording for a programme that is not currently in the EPG? I'm transferring the series recording details across from my MCE machine and there are a number which aren't being broadcast at the moment, but there doesn't appear to be a way to simply enter a keyword title and put it in the list without...
Is it possible to set up a recording for a programme that is not currently in the EPG? I'm transferring the series recording...
Is it possible to set up a recording for a programme that is not currently in the EPG? I'm transferring the series recording...
Replies
0
Views
1K
Glad it is working for you now. Just FYI, you should be able to delete the channels you are not interested in within the MP configuration and not see them at all. Depending on how you have things setup you may also need to remove them from your SD lineup too. patrick
Glad it is working for you now. Just FYI, you should be able to delete the channels you are not interested in within the MP...
First off, let me say I love this software so far... I started out with MythTV, but didn't understand linux so it was pretty much...
Replies
10
Views
3K
It's working like a charm... Thanks for your job Patrick
It's working like a charm... Thanks for your job Patrick
Hi, To try schedules direct. I've first delet all my analog channel. Then I did an autoscan. After I setup Schedules direct...
Replies
1
Views
1K
Hi there.... I am playing a little with a "problem", perhaps you have a solution.....;) If i have a channel (lets call it XYZ), and i can recive it from 3 different sources, how do i set this channel up..... If i eg. can record the XYZ from both analoug antenna, DVB-s and DVB-t..... It would be nice if i did not have to...
Hi there.... I am playing a little with a "problem", perhaps you have a solution.....;) If i have a channel (lets call it...
Hi there.... I am playing a little with a "problem", perhaps you have a solution.....;) If i have a channel (lets call it...
Replies
0
Views
1K
MP1 MP2 Req: Multikabel tvdatabase file (1 Viewer) DE
Hi Guys, I'm having trouble scanning and reorganizing my multikabel TV database. I try to copy/follow the Multikabel standard order of channels, but a few problems arise: - Multikabel skips a few steps in their Logical Channel Numbering (LCN). For instance, channel 10 is followed by channel 13. Does MediaPortal know how to handle...
Hi Guys, I'm having trouble scanning and reorganizing my multikabel TV database. I try to copy/follow the Multikabel standard...
Hi Guys, I'm having trouble scanning and reorganizing my multikabel TV database. I try to copy/follow the Multikabel standard...
Replies
0
Views
1K
Thanks Aaron... I'll look into them. Chuck
Thanks Aaron... I'll look into them. Chuck
I am in the process of ... very slowly... putting together my HTPC. For the moment , I have MP TV running on my office pc in...
Replies
2
Views
2K
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that actualy were grabbed during the cycle. This leads to a continuous repeated grab routine for every existing channel that sees the cpu usage at max for low cpu systems for many hours. For example 75 channels...
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that...
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that...
Replies
0
Views
1K
BTW I managed to join 30 or more of those files with Videoredo, and then do the editing...
BTW I managed to join 30 or more of those files with Videoredo, and then do the editing...
very disappointingly today MP messed up a recording, if I go, inside MP, under "Recorded TV" the recording is there and watchable...
Replies
2
Views
1K
Any luck? Hi I would also like to know how dual audio recording / playback is achieved. I know that if you change the audio channel whilst it is recording it will record in English, but of course, you´ll lose the ability to playback in Spanish. Also if you change the audio channel before recording and then begin recording it...
Any luck? Hi I would also like to know how dual audio recording / playback is achieved. I know that if you change the audio...
Hi all, I've been recording 'desperate housewives' from one spanish DVB-T channel and everything worked fine. However, I'd like...
Replies
1
Views
1K
MP1 MP2 Recording from STB DE
The above mentioned STB has two tuners. The second tuner can only be controlled via RF. Is there any way I can get the MCE replacement plugin for Either TVE2 or TVE3 to control the second tuner? I need to be able to "wake" it for recordings.(as mentioned above) I saw in this post...
The above mentioned STB has two tuners. The second tuner can only be controlled via RF. Is there any way I can get the MCE...
I have a Dish Network 322 STB its connected to my ATI 650 via s-video. The STB goes into a "screen saver mode"after x amount of...
Replies
15
Views
3K
that's too bad :( zap2it is very accurate and provides it for all of north america..
that's too bad :( zap2it is very accurate and provides it for all of north america..
I have what may be a simple question but can't seem to locate the answer in any documentation or FAQ. Is there a way to setup...
Replies
3
Views
2K
MP1 MP2 Recording Confusion DE
Oh, man this is so true! All of my friend, me included complain about this. It makes things less orderly and it's harder to see what's going on at the moment. Again, so true! It's just impossible to see in one view what is planned for recording because of these folders! And I haven't found a way to turn these off, that would be...
Oh, man this is so true! All of my friend, me included complain about this. It makes things less orderly and it's harder to see...
Howdy all I will start with a plea to please be gentle. I have come across from MythTV and have never used any of the...
Replies
1
Views
2K
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I will not get a perfect aspect ratio, right? Isn't there a general cropping option that crops the top/left/right/bottom all at once so that the proper aspect ratio is never lost?
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I...
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I...
Replies
0
Views
952
Change default quality setting? I am new to Mediaportal and I have a question. What is the default quality setting that is selectable on the Recordings Page? I see default, portable, low, medium and high quality options, but I have not been able to find which is default. Is it possible to change this default value? :thx: stefanbj
Change default quality setting? I am new to Mediaportal and I have a question. What is the default quality setting that is...
Hello, I'm recording digital TV using a DVB-S card. I recognized that there is the possibility to set the quality for the...
Replies
2
Views
2K
I recently installed Windows Vista Business 64 bits on my new machine, but could not get my Hauppauge working. The card seems to be correctly installed (I tried with drivers "in-box" from Vista 64 and drivers from Hauppauge CD 4.1), I can see it in Configuration, but when I enter MyTV, the TV doesn't start. If I try to scan channels...
I recently installed Windows Vista Business 64 bits on my new machine, but could not get my Hauppauge working. The card seems to be...
I recently installed Windows Vista Business 64 bits on my new machine, but could not get my Hauppauge working. The card seems to be...
Replies
0
Views
2K
Top Bottom