MyTV - Engine 0.2 (10 Viewers)

General talk, support, improvement suggestions and tips & tricks

support (2 Viewers)

Got a problem with MediaPortals TV-Engine 0.2? Post it here!

Tips and Tricks (11 Viewers)

Post your Tips and Tricks in here.

improvement suggestions (2 Viewers)

Got an idea how the TV-Engine 0.2 can be improved? Post it here!
MP1 MP2 Bug or feature? DE
How to get recorded files to "Recorded TV" if there is not file? I mean that if file is dvr-ms ended and I install new 0.2.3.0 to computer and orginal list is mess up. I have now 12 recorded files in my My Recordings so is there some magic tric to to this or is this also 'feature'-missing? If there is no way to do this with this...
How to get recorded files to "Recorded TV" if there is not file? I mean that if file is dvr-ms ended and I install new 0.2.3.0 to...
I try last day setup canels to MP, it find T-500 card and both tuners and also analog AIW X800GT is there (but no digital). In...
Replies
2
Views
1K
Hi... Newbie here as you will see when reading this thing :-) I have AIW X800GT and Artec T14 so AIW can do analog & digi and T14 if full digi usb dongel. So I have get analog to work (but we have no analog tv anymore, Finland end transmit start of this month) but how to get AIWs- and T14 digi to work with MediaPortal? ATI MMC 6.14...
Hi... Newbie here as you will see when reading this thing :-) I have AIW X800GT and Artec T14 so AIW can do analog & digi and...
Hi... Newbie here as you will see when reading this thing :-) I have AIW X800GT and Artec T14 so AIW can do analog & digi and...
Replies
0
Views
1K
Hi Kaptain, It can be confusing. There are a few different ways to do it so when you say, you can't get it to work, I am going to just assume you have not got any way to work yet. Just for reference there are at least: XMLTV, WebEPG, Schedules Direct Plugin, and some site scrapers around. (Not sure which are set up for...
Hi Kaptain, It can be confusing. There are a few different ways to do it so when you say, you can't get it to work, I am...
Hi there, I have searched through the forum for a solution to this and sorry if the answer to my problem is so simple but I have...
Replies
1
Views
2K
I'm not sure if this is more of a skin related question or not. Is it possible to change the default time interval in the TV Guide screen? Usually it's set for ~2hours and I use F8 to increase that to the maximum which I think is ~4hours. Can this longer view time in the guide be somehow set to the default? Thanks.
I'm not sure if this is more of a skin related question or not. Is it possible to change the default time interval in the TV...
I'm not sure if this is more of a skin related question or not. Is it possible to change the default time interval in the TV...
Replies
0
Views
2K
Yeah! I thought so! I've just updated the graphic card, but still need to update the cpu. :) Though the new card is only directx 8.1 compatible.. Anyhow.. Well i can live a while longer with no tv through the mediastation :)
Yeah! I thought so! I've just updated the graphic card, but still need to update the cpu. :) Though the new card is only...
Hi! I had recently a problem there MP said "Unable to create graph" when I wanted to look at tv via MP. I have Pinnacle PCTV...
Replies
2
Views
1K
I was playing around last night with the VFD i have and decided to see what was displayed when a DVD was played. When I came back to the tv menu the tv and timeshift is off. I'm using 2.3.0rc2. Is this the way it's designed or is it a bug? If it's designed that way, can I turn it off? Also, is 19 minutes the max pre and post...
I was playing around last night with the VFD i have and decided to see what was displayed when a DVD was played. When I came back...
I was playing around last night with the VFD i have and decided to see what was displayed when a DVD was played. When I came back...
Replies
0
Views
957
Glad it is working for you now. Just FYI, you should be able to delete the channels you are not interested in within the MP configuration and not see them at all. Depending on how you have things setup you may also need to remove them from your SD lineup too. patrick
Glad it is working for you now. Just FYI, you should be able to delete the channels you are not interested in within the MP...
First off, let me say I love this software so far... I started out with MythTV, but didn't understand linux so it was pretty much...
Replies
10
Views
3K
MP1 MP2 Codec H.264 In Mytv DE
thanks.
thanks.
How i can set H.264 video decoder in MyTv setting??? I'm not be able to change it. I'd like to use cyberlink h.264 codec...
Replies
4
Views
1K
I Have Gf 4 Vivo When Im Click In Tv Show The Massage >> Unable To Create Graph<< Thx For Help
I Have Gf 4 Vivo When Im Click In Tv Show The Massage >> Unable To Create Graph<< Thx For Help
I Have Gf 4 Vivo When Im Click In Tv Show The Massage >> Unable To Create Graph<< Thx For Help
Replies
0
Views
879
Hi, I'm using latest svn (11.09.2007) and DVB-C drivers 5.0.0.2 beta for TT 1500-C card. The card works normally in TVE2 but after hibernate and resume there are many errors in the logs and my scheduled recordings didn't start. Please take a look on it, I have to decide within the next days if i keep these components...
Hi, I'm using latest svn (11.09.2007) and DVB-C drivers 5.0.0.2 beta for TT 1500-C card. The card works normally in TVE2 but...
Hi, I'm using latest svn (11.09.2007) and DVB-C drivers 5.0.0.2 beta for TT 1500-C card. The card works normally in TVE2 but...
Replies
0
Views
903
ehrm..find it https://forum.team-mediaportal.com/mass_updating_channels_config_external_settops-t2989.html
ehrm..find it https://forum.team-mediaportal.com/mass_updating_channels_config_external_settops-t2989.html
Hi there, i need to mass changing all external TV channels to SVHS input is there a way to change all in one go? Thanks a lot
Replies
1
Views
1K
Try to enable hidden and system files...
Try to enable hidden and system files...
I'm running MPRC1 with SVN 15497 and was just wondering where the file is stored when you use the timeshift function? I noticed...
Replies
3
Views
2K
Hi Guys, I'm having trouble scanning and reorganizing my multikabel TV database. I try to copy/follow the Multikabel standard order of channels, but a few problems arise: - Multikabel skips a few steps in their Logical Channel Numbering (LCN). For instance, channel 10 is followed by channel 13. Does MediaPortal know how to handle...
Hi Guys, I'm having trouble scanning and reorganizing my multikabel TV database. I try to copy/follow the Multikabel standard...
Hi Guys, I'm having trouble scanning and reorganizing my multikabel TV database. I try to copy/follow the Multikabel standard...
Replies
0
Views
1K
what they said
what they said
I'm contemplating buying a Genpix Skywalker-1 for the HTPC. Does anyone here have experience using it with MP? Thanks
Replies
5
Views
4K
MP1 MP2 Via Epia Problem DE
You could use SimpleMP which is a light weight skin but I am afraid that will not be enough to run Mp on an Epia board. The GFX are just not good enough and CPU is very slow...You could try installing a separate GFX card but that won't solve the CPU problem.
You could use SimpleMP which is a light weight skin but I am afraid that will not be enough to run Mp on an Epia board. The GFX are...
Hi. I have a problem with myTV (see my system configuration left, the EPIA motherboard has a Via video chipset with DVD...
Replies
1
Views
1K
I haven't figured out how to do this by editing the XML file yet, but I'm working on it. Meanwhile, if you call up the Media Portal Configuration Utility and go to Television - TV Channels, you will find buttons "Up" and "Down", which become active when you have selected a channel. You can use these to put your TV channels into the...
I haven't figured out how to do this by editing the XML file yet, but I'm working on it. Meanwhile, if you call up the Media...
Hi There, I am new to MP having previously used MCE. I have just managed to get almost everything working as I want apart from...
Replies
1
Views
2K
MP1 MP2 Merging SBE files DE
Are you sure there isn't a .dvr-ms file there aswell? This is how it looks from yesterday when I (accidently) recorded a show manually: Kanal 5_America's Funniest Home Videos_200709241905p3032.dvr-ms - 12k Kanal 5_America's Funniest Home Videos_200709241905p3032_1.sbe - 800 MB etc... You'll need the (small) dvr-ms file to view...
Are you sure there isn't a .dvr-ms file there aswell? This is how it looks from yesterday when I (accidently) recorded a show...
Hi! My HTPC crashed while recording and now the recording is just a bunch of SBE files (stream buffer engine). It seams not be...
Replies
1
Views
1K
Any luck? Hi I would also like to know how dual audio recording / playback is achieved. I know that if you change the audio channel whilst it is recording it will record in English, but of course, you´ll lose the ability to playback in Spanish. Also if you change the audio channel before recording and then begin recording it...
Any luck? Hi I would also like to know how dual audio recording / playback is achieved. I know that if you change the audio...
Hi all, I've been recording 'desperate housewives' from one spanish DVB-T channel and everything worked fine. However, I'd like...
Replies
1
Views
1K
Thanks but doesn't help. The logs says: 2007-09-01 14:18:48.703125 [ERROR][6]: Command:MediaPortal.TV.Recording.ViewTvCommand failed 2007-09-01 14:18:48.703125 [ERROR][6]: Exception :System.Runtime.InteropServices.COMException (0x80040273): Creating an instance of the COM component with CLSID...
Thanks but doesn't help. The logs says: 2007-09-01 14:18:48.703125 [ERROR][6]: Command:MediaPortal.TV.Recording.ViewTvCommand...
Hello from a newbie to the forum, so be gentle and I hope I have posted in the right place. I have done a search and can't find...
Replies
2
Views
1K
I am new to posting on this forum so first of all, hello. I am thinking about getting a PVR-150 and putting a HTPC in my living room (using MediaPortal). The only uncertain question i have is about getting the TV aspect of it working good. Okey, now is my situation. I am comcast cable and recently they have switched my whole area...
I am new to posting on this forum so first of all, hello. I am thinking about getting a PVR-150 and putting a HTPC in my living...
I am new to posting on this forum so first of all, hello. I am thinking about getting a PVR-150 and putting a HTPC in my living...
Replies
0
Views
1K
My Theatrix 650 card is loading two muxers for analog TV... the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2 Multiplexer. Demux connects to old Media Center Mux but still loads new avstream mux. Also old MediaCenter Video Encoder is loading and connecting to old mux AVStream Capture pin 0 ->old MCVidEnc ->...
My Theatrix 650 card is loading two muxers for analog TV... the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2...
My Theatrix 650 card is loading two muxers for analog TV... the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2...
Replies
0
Views
1K
Thanks for the answer.
Thanks for the answer.
Hi, I'm trying to run MyTV on my hauppauge card, but I'm unable to select h264 codec for decoding stream. In the list I see only...
Replies
2
Views
1K
Bummer...lol.
Bummer...lol.
Installed fine Hasn't crashed or anything else. Saw my wintv nova-s-plus no problem. Problem stats here. I don't use...
Replies
4
Views
1K
Ok... I was not implying that is was a bug, just unusual. (BTW: I am sober :D)
Ok... I was not implying that is was a bug, just unusual. (BTW: I am sober :D)
For specs, see "My system" Topic says it, I believe. The screen used to go black when zapping (and therefor ending and starting...
Replies
2
Views
990
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that actualy were grabbed during the cycle. This leads to a continuous repeated grab routine for every existing channel that sees the cpu usage at max for low cpu systems for many hours. For example 75 channels...
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that...
The EPG grabber for DVB-t is only updating lastgrab for the channel that the grab has occured from and not the channels that...
Replies
0
Views
1K
@ Vertiger. Ok, well, that's a bit of a shame...but I've made an Improvement Suggestion anyway and I still hope somebody will pick it up soon :) @ Paranoid Delusion, please read my first post carefully again :) I know this card priority function exists and it works great, but thats not what I asked for. We're talking about adding...
@ Vertiger. Ok, well, that's a bit of a shame...but I've made an Improvement Suggestion anyway and I still hope somebody will pick...
Hi guys, I have a bit of a problem...I think. I have one dvb-c card (FloppyDTV) and a double analog card (PVR500). The available...
Replies
6
Views
2K
ok, the flickering has stopped. So this thread can be closed :) I can now play MPEG2, XVID, DIVX perfectly. However, VC-1, and H264 and WMV are still not ok...
ok, the flickering has stopped. So this thread can be closed :) I can now play MPEG2, XVID, DIVX perfectly. However, VC-1, and...
I have a problem with some tv channels. Some don't have any sound. I noticed these channels are all multi stream audio channels...
Replies
10
Views
2K
Analog 4:3 and 16:9 are the same resolution (Such as 720x576 for pal), only displayed differently. I don't think s-video/composite interfaces have aspect ratio information, so there is in fact no way for an analog PVR card (Or especially MP above it) to know the AR.
Analog 4:3 and 16:9 are the same resolution (Such as 720x576 for pal), only displayed differently. I don't think s-video/composite...
(See "My sytem" for system specs) My STB sometimes outputs 4:3 and sometimes 16:9, but the Hauppauge PVR-cards hars only 4:3 frame...
Replies
2
Views
3K
You only need MySQL ODBC driver when you are using MySQL, if you use SQL Server 2005 it is not necessary. So you install: 1. the SQL Server (Use goatse's interface when you use SQL Server 2005 / MY MOD and MySQL ODBC driver when you use MySQL Server) 2. Install TV-Engine (Setup anything including channels / your EPG config) 3. You...
You only need MySQL ODBC driver when you are using MySQL, if you use SQL Server 2005 it is not necessary. So you install: 1. the...
Hello, might seem an odd request, here is what I'd really like to try...and why: I've got a well installed and set-up ATI...
Replies
3
Views
1K
Hauppauge released a newer version of the 1600, and it's not yet supported in mediaportal. It has a different device ID even. I will work this evening to see if I can get get all the info to a developer and get this darn card supported. read here...
Hauppauge released a newer version of the 1600, and it's not yet supported in mediaportal. It has a different device ID even. I...
Hi I have installed a WinTV-HVR1600 tv card on my asusp5b motherboard. I'm running Winxp prof. I downloaded media portal 2.3. I...
Replies
2
Views
2K
Top Bottom