MyTV - Engine 0.2 (5 Viewers)

General talk, support, improvement suggestions and tips & tricks

support

Got a problem with MediaPortals TV-Engine 0.2? Post it here!

Tips and Tricks (14 Viewers)

Post your Tips and Tricks in here.

improvement suggestions (1 Viewer)

Got an idea how the TV-Engine 0.2 can be improved? Post it here!
It's working like a charm... Thanks for your job Patrick
It's working like a charm... Thanks for your job Patrick
Hi, To try schedules direct. I've first delet all my analog channel. Then I did an autoscan. After I setup Schedules direct...
Replies
1
Views
1K
I had not seen this new option. I will test. Thank you!
I had not seen this new option. I will test. Thank you!
Hello, First of it is important to say that I have 2 TV cards. Yesterday evening I programmed via the guide several...
Replies
2
Views
1K
Thank you Thank you... Much apeciated now how do you get increments of 5 minutes for recording rather than 30.. IE I want to record 5 minutes before the start of a show then for an hour and ten minutes so I have a 5 minute buffer either side ... it seems this is not an option for record from line in
Thank you Thank you... Much apeciated now how do you get increments of 5 minutes for recording rather than 30.. IE I want to...
Is it possible to access the line in (CVBS or S-Video) on a TV card.. is there a way.. will this ever be implemented ?. thanks
Replies
4
Views
1K
MP1 MP2 Mini OSD? DE
Thanks for the reply Flip, I have tried the miniOSD you mentioned, however the wife has bad eyes and can't seem to read the text (yes she has glasses but refuses to wear them, while watching TV....). Maybe I have a case for getting a really big TV! Being more realistic can the miniOSD be modified? Maybe reduce the # of channels...
Thanks for the reply Flip, I have tried the miniOSD you mentioned, however the wife has bad eyes and can't seem to read the text...
I could have sworn myTV displayed a little pane on the lower portion of the screen which contained the synopsis of the show you...
Replies
7
Views
1K
MP1 MP2 Codec H.264 In Mytv DE
thanks.
thanks.
How i can set H.264 video decoder in MyTv setting??? I'm not be able to change it. I'd like to use cyberlink h.264 codec...
Replies
4
Views
1K
hey jimbojumbo, I think many users in oz have this same problem since the number of FTA channels seems less than other countries. Here's how I got my TV Guide right: 1. Using notepad, open up the mytvguide.xml for your appropriate skin 2. Backup the original (e.g. mytvguide.bak) 3. Then find this section... <control>...
hey jimbojumbo, I think many users in oz have this same problem since the number of FTA channels seems less than other...
Hi all, Just got my Media Portal installed and the EPG installed. Kudos to all involved, a magnificent effort) The only query...
Replies
2
Views
1K
Use MCE standby tool, to configure your computer settings to make sure it supports standby hibernate correctly. Once you have configured standby settings within powerscheduler, it should just be a matter of leaving MP in home screen, for the time you have set. If you are still having problems then follow the support link at...
Use MCE standby tool, to configure your computer settings to make sure it supports standby hibernate correctly. Once you have...
Hello, can you help me with my problem? I am using power scheduler plugin on my HTPC and it still doesn't wake up my computer to...
Replies
1
Views
1K
I'm seeing something similar. Access to the TV database seems much more sluggish with RC3 than with RC2 or earlier versions and I have noticed that sometimes when I close MP it takes a while for the process to disappear from the task list, even though the GUI disappears immediately. The delay seems to be due to MP importing new TV...
I'm seeing something similar. Access to the TV database seems much more sluggish with RC3 than with RC2 or earlier versions and...
Hi, Anyone experiencing heavy hard drive usage when just browsing music or the TV guide? - even when you just leave the pc...
Replies
4
Views
1K
On one of my HTPC's I run MP in windowed mode on the lcd monitor and have the TV setup as secon monitor in clone mode. I use overlay on 2nd display to show tv & vidio full screen on the tv whils i can brows the web, play games, learn to program in C# on the primary monitor. I control MP using the MCE remote whilst doing other things...
On one of my HTPC's I run MP in windowed mode on the lcd monitor and have the TV setup as secon monitor in clone mode. I use...
I've been looking but can't seem to find it. Is there an option to basically make a small window at the bottom of your screen that...
Replies
3
Views
1K
MP1 MP2 tv no fullscreen DE
For my installation it seems to work with the actual cvs.... :)
For my installation it seems to work with the actual cvs.... :)
Hi when i go into mytv comes on ok but when i try to go fullscreen MP locks up and error report appears...program has to end...any...
Replies
5
Views
1K
Hi all, this is a copy from my post: (https://forum.team-mediaportal.com/showthread.php?p=104761#post104761) "While I was testing SageTV I noticed that when I switch between cards, the buffer doesn’t get deleted. And also when I restart the computer after SageTV crashes (it crashed so many times v6) I can still watch the old...
Hi all, this is a copy from my post: (https://forum.team-mediaportal.com/showthread.php?p=104761#post104761) "While I was...
Hi I know this was well discussed in the past whether it is a good idea to have or not. Would implementing an option in...
Replies
5
Views
1K
I already looked in te keyboard shortcut keys. there is nothing there for swithcing to the tv-guide
I already looked in te keyboard shortcut keys. there is nothing there for swithcing to the tv-guide
I was just wondering if it is possible to go straight to the tv-guide from MediaPortal-Home, instead of goin through MyTv and then...
Replies
5
Views
1K
Hi, Is there a way to realize automatic stopping TV when leaving the MyTV menu ? Automatic starting can be activated in the TV options, but stopping ? I use MP 1.0 RC2. Thanks, Schnö
Hi, Is there a way to realize automatic stopping TV when leaving the MyTV menu ? Automatic starting can be activated in the TV...
Hi, Is there a way to realize automatic stopping TV when leaving the MyTV menu ? Automatic starting can be activated in the TV...
Replies
0
Views
1K
MP1 MP2 PVR basics DE
Hi ocnos MediaPortal/Configuration/Plugins/PowerScheduler - MediaPortal Wiki Documentation is the best place to look, remember for this to work, you need mediaportal running (unless using TVServer, which as you have posted in the TVE2 forum unlikely) and left in home screen idle.
Hi ocnos MediaPortal/Configuration/Plugins/PowerScheduler - MediaPortal Wiki Documentation is the best place to look, remember...
Hi, I just got MP working after weeks of problems and I would like to know the basics of MP as PVR. Is there a post or tutorial...
Replies
2
Views
1K
The TV Server is a whole lot simpler to get working with unusual TV cards. I'm running three tuners in my HTPC - a Compro T300 (PCI) and a Digital Now TinyTwin (USB). I was having some difficulty getting either units to work with the standard MP, but had no trouble with TVE3.
The TV Server is a whole lot simpler to get working with unusual TV cards. I'm running three tuners in my HTPC - a Compro T300...
Hey All, Does MP 0.2.3 RC2 support them or do i need to run tv server? Cheers Iain
Replies
2
Views
1K
Thanks for the answer.
Thanks for the answer.
Hi, I'm trying to run MyTV on my hauppauge card, but I'm unable to select h264 codec for decoding stream. In the list I see only...
Replies
2
Views
1K
Ray, No I am an XP SP2 user with a PCI Nebula DVB-T card. Regards Richard.
Ray, No I am an XP SP2 user with a PCI Nebula DVB-T card. Regards Richard.
I have been through the tv wizard and got the tv signal working when i click into the tv section of media portal. This then brings...
Replies
7
Views
1K
Thanks but doesn't help. The logs says: 2007-09-01 14:18:48.703125 [ERROR][6]: Command:MediaPortal.TV.Recording.ViewTvCommand failed 2007-09-01 14:18:48.703125 [ERROR][6]: Exception :System.Runtime.InteropServices.COMException (0x80040273): Creating an instance of the COM component with CLSID...
Thanks but doesn't help. The logs says: 2007-09-01 14:18:48.703125 [ERROR][6]: Command:MediaPortal.TV.Recording.ViewTvCommand...
Hello from a newbie to the forum, so be gentle and I hope I have posted in the right place. I have done a search and can't find...
Replies
2
Views
1K
MP1 MP2 No Signal found? DE
You might want to back up your channels (in case of problems) then clear them out. Then do an auto tune unless you know the info for the channel.
You might want to back up your channels (in case of problems) then clear them out. Then do an auto tune unless you know the info...
Comcast recently changed the number of a sports channel from 65 to 61 in my area. I edited that number to reflect 61, but when I go...
Replies
3
Views
1K
hmmm can anyone help? :S
hmmm can anyone help? :S
Hey guys, my first post - so a big :thx: to all the devs, testers, etc - I'm using MP (mostly) without problems and it is an...
Replies
3
Views
1K
Hi Barry, Don't be so quick to throw memory at the problem. I have only 512M of RAM in my system and even with 2 tuners recording while I'm watching a pre-recorded show, MP uses less than 250MB without any problems. As rtv said, your memory usage might be normal, but there appears to be a separate issue that's causing the...
Hi Barry, Don't be so quick to throw memory at the problem. I have only 512M of RAM in my system and even with 2 tuners...
When I start using MY TV in MP the memory used by MP raises to over 350MBytes. My PC has 1GByte installed and when this happens it...
Replies
8
Views
1K
heres a thread that has most of the details aout the problem https://forum.team-mediaportal.com/showthread.php?t=9995&page=5&highlight=index
heres a thread that has most of the details aout the problem...
Having the channels in the correct order hasnt worked in a very long time last i heard someone looked at the code and found that...
Replies
1
Views
1K
MP1 MP2 USB 2 receiver DE
JoeFedora Please see this post, http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list and follow the instructions, your card needs to be added to the supported list to run inside mediaportal, or you need to setup TVengine3 (which should find your card on its own) with the TVserver. Always think myself, nice...
JoeFedora Please see this post, http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list and follow the...
I have Digio2 USB2 receiver. Seems that mediaportal doesn't support usb 2receivers att all. Has anybody idea how it could work? Do...
Replies
2
Views
1K
Thanks a lot and-81 ! I can't believe I didn't notice the process plugin called TV2 blaster at the very bottom of the plugins list...Getting old I guess ;-) I just set it up like I did with TV3 blaster before and voila ! All clear, channels are changing on the STB... Still a few glitches to fix here and there (like...
Thanks a lot and-81 ! I can't believe I didn't notice the process plugin called TV2 blaster at the very bottom of the plugins...
Hi all, After a few attempts with TVengine 3.0 and lots of problems with timeshift and change channels issues, I'm back to...
Replies
2
Views
1K
Hi There, This is an known issue with XP, and there has been a fix available for some time now. Have a look at the following thread: https://forum.team-mediaportal.com/multi_dvb_tuner_issues_windows_xp_patch-t6344.html Cheers Jamie
Hi There, This is an known issue with XP, and there has been a fix available for some time now. Have a look at the following...
i read something here: https://www.team-mediaportal.com/requirements.html " Windows XP SP2: With WindowsXP you are able to use...
Replies
1
Views
1K
My tuner an HD HomeRun will not tune channels upon waking from hibernate (in fact the tuner never receives any commands at all), unless I restart Media Portal then it works fine. I assume that this means that something is not getting set properly upon hibernation. I assume that this is a result of the HD HomeRun not getting...
My tuner an HD HomeRun will not tune channels upon waking from hibernate (in fact the tuner never receives any commands at all)...
My tuner an HD HomeRun will not tune channels upon waking from hibernate (in fact the tuner never receives any commands at all)...
Replies
0
Views
1K
You only need MySQL ODBC driver when you are using MySQL, if you use SQL Server 2005 it is not necessary. So you install: 1. the SQL Server (Use goatse's interface when you use SQL Server 2005 / MY MOD and MySQL ODBC driver when you use MySQL Server) 2. Install TV-Engine (Setup anything including channels / your EPG config) 3. You...
You only need MySQL ODBC driver when you are using MySQL, if you use SQL Server 2005 it is not necessary. So you install: 1. the...
Hello, might seem an odd request, here is what I'd really like to try...and why: I've got a well installed and set-up ATI...
Replies
3
Views
1K
Hy, I guess it's IPTV? Check this thread
Hy, I guess it's IPTV? Check this thread
Hi, In France we have Free (french provider) and this one propose a "tryplay" (TV, unlimited Internet and phone) and Free give as...
Replies
1
Views
1K
MP1 MP2 My TV in My Plugins DE
Hi Franky I have also found this in a recent SVN when running on Vista. You need to open MediPortal Configuration and select Plugins in the left hand pane. Then in the Plugins tab in the Windows Plugins section right click on the My TV icon. In the menu that appears you will see that "Listed in My Plugins" is selected. Select...
Hi Franky I have also found this in a recent SVN when running on Vista. You need to open MediPortal Configuration and select...
Why after installing last SVN, My TV is now contained in my plugins instead to be in the home menu? I'm using vista. Some...
Replies
1
Views
1K
Bummer...lol.
Bummer...lol.
Installed fine Hasn't crashed or anything else. Saw my wintv nova-s-plus no problem. Problem stats here. I don't use...
Replies
4
Views
1K
Top Bottom