MyTV - Engine 0.2 (8 Viewers)
General talk, support, improvement suggestions and tips & tricks
support (4 Viewers)
Got a problem with MediaPortals TV-Engine 0.2? Post it here!
Tips and Tricks (24 Viewers)
Post your Tips and Tricks in here.
improvement suggestions (2 Viewers)
Got an idea how the TV-Engine 0.2 can be improved? Post it here!
- Locked
- Poll
Hi,
Please use the other thread you since here it is about TVE2(old lady) ;)
Regards
Roy
Hi,
Please use the other thread you since here it is about TVE2(old lady) ;)
Regards
Roy
Hey,
This poll is to try and concince devs to build in support for ITV HD. You guys know what the problem is, but wont add it...
Okay. I thought that power schedule only worked with TVE3, I must have miss read it.
How have you found TVE3?
Okay. I thought that power schedule only worked with TVE3, I must have miss read it.
How have you found TVE3?
Hi.
I am wondering if installing TVEngine3 is the only way that I can have MediaPortal record from a standby or hibernated...
Using DVB dual tuner works better as I don't have to bother with all the crappy MS patches to get both tuners working at once. Plus, as I currently use my desktop for MP currently, its great to be able to record without firing up MP (or forgetting to), and being able to stream to my laptop (most of the time!)
This thread has a...
Using DVB dual tuner works better as I don't have to bother with all the crappy MS patches to get both tuners working at once...
hi, i've been on a bit of a hiatus from the forums and the mediaportal website in general as i was extremely happy with the...
Vladimir
Thx for best job. Only this IPTV solution work stability and fast.
Can you make this for RC3? Very big thx!!!
Vladimir
Thx for best job. Only this IPTV solution work stability and fast.
Can you make this for RC3? Very big thx!!!
Hi All!
Finally I’ve managed adding IPTV support to the MediaPortal. It’s based on a “fake” IPTV tuner card, which receives...
No very sophiticated driver hardware emulator program, just a entry in the XML to stop MP from bugging me :P
No very sophiticated driver hardware emulator program, just a entry in the XML to stop MP from bugging me :P
Is it possible to ignore ( dont show) this message.
I have no tuner installed but use the EPG to see what's on tv
thx
@ Vertiger. Ok, well, that's a bit of a shame...but I've made an Improvement Suggestion anyway and I still hope somebody will pick it up soon :)
@ Paranoid Delusion, please read my first post carefully again :) I know this card priority function exists and it works great, but thats not what I asked for. We're talking about adding...
@ Vertiger. Ok, well, that's a bit of a shame...but I've made an Improvement Suggestion anyway and I still hope somebody will pick...
Hi guys, I have a bit of a problem...I think.
I have one dvb-c card (FloppyDTV) and a double analog card (PVR500). The available...
Well, I have the answers now.
For some reason the tooltips for the plugins are not shown in my HTPC, so I did not realize they exist...
From the tooltips along with frodo's documented source code files, it is quite clear what it does. It also partialy explains why it was so confusing when I tried to figure it out by experiments...
Well, I have the answers now.
For some reason the tooltips for the plugins are not shown in my HTPC, so I did not realize they...
Hi,
What will happen when the quota limit defined in "Television->Recording->Disk Quota" is reached?
Which recording will be...
I hate the folders layout, especially since theres no way of telling if its just one show or several, pressing play on the folder does nothing and your wife gets frustrated.
I hate the folders layout, especially since theres no way of telling if its just one show or several, pressing play on the folder...
OK don't know if this is the correct place for this, to be honest find the layout here a bit confusing, so feel free to move if...
Analog 4:3 and 16:9 are the same resolution (Such as 720x576 for pal), only displayed differently.
I don't think s-video/composite interfaces have aspect ratio information, so there is in fact no way for an analog PVR card (Or especially MP above it) to know the AR.
Analog 4:3 and 16:9 are the same resolution (Such as 720x576 for pal), only displayed differently.
I don't think s-video/composite...
(See "My sytem" for system specs)
My STB sometimes outputs 4:3 and sometimes 16:9, but the Hauppauge PVR-cards hars only 4:3 frame...
My Theatrix 650 card is loading two muxers for analog TV...
the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2 Multiplexer.
Demux connects to old Media Center Mux but still loads new avstream mux.
Also old MediaCenter Video Encoder is loading and connecting to old mux
AVStream Capture pin 0 ->old MCVidEnc ->...
My Theatrix 650 card is loading two muxers for analog TV...
the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2...
My Theatrix 650 card is loading two muxers for analog TV...
the old ATI Media Center Multiplexer and the new ATI AVSteam MPEG2...
My LCD-TV doesn't have a 720 line mode, so I'm not sure if forcing 720p50 is a good idea.
Since I had only installed the driver, I took advantage of the situation by installing the complete Catalyst suite 8.9.
I have also updated to MP 1.0 RC3. I am starting as close to the default settings and only changing them step by step.
So...
My LCD-TV doesn't have a 720 line mode, so I'm not sure if forcing 720p50 is a good idea.
Since I had only installed the driver, I...
I realized the analog TV (on the HTPC) is worse than without HTPC (just see the TV). I would like to make better quality. I waiting...
I just wondering , if i change my little 13" tv in my home master room with a small-foot-print pc with a 22" LCD computer monitor with DVI connector , and use the media portal client , i have the same brightly resolution , like a TV quality?
** before that suppose i install the TV server in a another computer with all the specs and...
I just wondering , if i change my little 13" tv in my home master room with a small-foot-print pc with a 22" LCD computer monitor...
I just wondering , if i change my little 13" tv in my home master room with a small-foot-print pc with a 22" LCD computer monitor...
Maybe, I must use TVServer?
Maybe, I must use TVServer?
Hi all,
I'm David. I use MediaPortal since several months.
I think it's the ultimate mediacenter.
I would ask you a question...
wow thanks speedway - have mediaportal somewhat working now!
just got some codec issues to sort out as tv is jumpy.
appreciate your investigation
wow thanks speedway - have mediaportal somewhat working now!
just got some codec issues to sort out as tv is jumpy.
appreciate...
Hi all
I was wondering of someone could help me to get my Technisat Airstar 2 card to be recognised as a DVB-T card with MP 2. I...
hmmm can anyone help? :S
hmmm can anyone help? :S
Hey guys, my first post - so a big :thx: to all the devs, testers, etc - I'm using MP (mostly) without problems and it is an...
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels are smushed into the same 4:3 ratio as the SD channels. If i manually change the ratio by selecting 'Stretch' it displays properly, but then all of the SD channels are stretched. I don't want to have to...
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels...
I have 2 SD tuners and 1 HD tuner (Vbox 150). Also, my display is 1280x720. My SD channels appear correctly but the HD channels...
Thanks for the answer.
Thanks for the answer.
Hi, I'm trying to run MyTV on my hauppauge card, but I'm unable to select h264 codec for decoding stream. In the list I see only...
yes probably .. but its not completly ilegal.. I pay every monath for this programs, and I only wannt to have good picture and sound ,and not via exsternal STB .. ( and this STB is very bad... i want to buy better, but card work only in this STB.. Provider lock STB and card. One can't work without other. How romantics.. :P ) Many...
yes probably .. but its not completly ilegal.. I pay every monath for this programs, and I only wannt to have good picture and...
Is it possible to use media portal and DVB-S card to watch locked satelite program? I wannt tu use keys from internet to decode...
You only need MySQL ODBC driver when you are using MySQL, if you use SQL Server 2005 it is not necessary. So you install:
1. the SQL Server (Use goatse's interface when you use SQL Server 2005 / MY MOD and MySQL ODBC driver when you use MySQL Server)
2. Install TV-Engine (Setup anything including channels / your EPG config)
3. You...
You only need MySQL ODBC driver when you are using MySQL, if you use SQL Server 2005 it is not necessary. So you install:
1. the...
Hello,
might seem an odd request, here is what I'd really like to try...and why:
I've got a well installed and set-up ATI...
While I am not a developer of MP I can say:
- h.264, if you have the codec, it will play.
- no idea what cable card is. If it's US cable, then yes it should work.
- you will be able to pause until your timeshift buffer is full. max size is 180 minutes, which would be what, like 60gig of size for HD?
- Multiple servers can in...
While I am not a developer of MP I can say:
- h.264, if you have the codec, it will play.
- no idea what cable card is. If it's...
I'm researching PVR software, and have some questions for you regarding your product which I'm hoping you can answer?
- H.264...
Hi,
in the configuration under General, look for the entry "Start Mediaportal in Fullscreen mode"
or
Hit "alt" - "Enter" in window mode
cheers
joystick
Hi,
in the configuration under General, look for the entry "Start Mediaportal in Fullscreen mode"
or
Hit "alt" - "Enter" in...
I've got my tv tuner now working but when i put it in full screen mode you still see the windows start bar & the...
OK, thanks!
/jayrock
OK, thanks!
/jayrock
In full screen TV, pressing "P" jumps to the next channel. Is this intended behaviour?
I have assigned "P" to the play button on...
hello,
the plugin wwitv (plugins->web) can do that
(https://www.team-mediaportal.com/component/option,com_remository/Itemid,35/func,fileinfo/id,276/).
The plugin use the database of the website www.wwitv.com.
Cédric
hello,
the plugin wwitv (plugins->web) can do that...
Hi everybody...
:sorry: sorry for my english but I am italian....
I have meet MP just a few days ago...it is simply GREAT :-)...
Has anyone managed to get Foxtel working in a PC card with a CAM module. If you have a legit satellite service surely this would be legal ?
Has anyone managed to get Foxtel working in a PC card with a CAM module. If you have a legit satellite service surely this would be...
Has anyone managed to get Foxtel working in a PC card with a CAM module. If you have a legit satellite service surely this would be...
Hi Barry,
Don't be so quick to throw memory at the problem. I have only 512M of RAM in my system and even with 2 tuners recording while I'm watching a pre-recorded show, MP uses less than 250MB without any problems. As rtv said, your memory usage might be normal, but there appears to be a separate issue that's causing the...
Hi Barry,
Don't be so quick to throw memory at the problem. I have only 512M of RAM in my system and even with 2 tuners...
When I start using MY TV in MP the memory used by MP raises to over 350MBytes. My PC has 1GByte installed and when this happens it...
I'm seeing something similar.
Access to the TV database seems much more sluggish with RC3 than with RC2 or earlier versions and I have noticed that sometimes when I close MP it takes a while for the process to disappear from the task list, even though the GUI disappears immediately. The delay seems to be due to MP importing new TV...
I'm seeing something similar.
Access to the TV database seems much more sluggish with RC3 than with RC2 or earlier versions and...
Hi,
Anyone experiencing heavy hard drive usage when just browsing music or the TV guide? - even when you just leave the pc...
It is downloaded via Internet (see "\WebEPG\Grabbers" directory for the actual origin of the data).
-level20peon
It is downloaded via Internet (see "\WebEPG\Grabbers" directory for the actual origin of the data).
-level20peon
Hi,
Using MediaPortal very successfully with movies and music, looking to get info on the TV server. I already run BeyondTV but...
Excellent... thankyou! I was wondering what the problem was.
Excellent... thankyou! I was wondering what the problem was.
Hi Guys,
I installed a DTV1000 T as a secondry TV card on the weekend and had a few issues. After much reading of the forums and...
Hi,
I have recently bought the PCTV 60e. As I read in the wiki, this one should be supported by MP.
But in the configuration appears an error message, that the graph could not be built. It seems the link to the mpeg2 demuxer crashes here:
2007-08-22 18:06:20.062500 [Info.][Config Main]: device:WinFast PVR2000 WDM Video...
Hi,
I have recently bought the PCTV 60e. As I read in the wiki, this one should be supported by MP.
But in the configuration...
Hi,
I have recently bought the PCTV 60e. As I read in the wiki, this one should be supported by MP.
But in the configuration...
Hmm my problem is similar although the log says its getting the EPG but nothing appears. I know that updating does work as I can get it to occur easily in another HTPC program. Perhaps I'm just being impatient and should let it run.
Hmm my problem is similar although the log says its getting the EPG but nothing appears. I know that updating does work as I can...
I'm using a Hauppage Mova-T 500 dual DVB-T card. I expected the EPG to be updated over the air and to be available very quickly...