Hi There,
This is an known issue with XP, and there has been a fix available for some time now.
Have a look at the following thread:
https://forum.team-mediaportal.com/multi_dvb_tuner_issues_windows_xp_patch-t6344.html
Cheers
Jamie
Hi There,
This is an known issue with XP, and there has been a fix available for some time now.
Have a look at the following...
i read something here: https://www.team-mediaportal.com/requirements.html
" Windows XP SP2: With WindowsXP you are able to use...
This is a common fault with the 0.2x
First thing to perform is the following.
Make sure you perform multiple scans. One at 7 AM, one at 3PM and one at 9PM. This is so that you pick up the maximum channels that were off-air during the previous scan.
Even after the above, you will find you are missing a number of channels...
This is a common fault with the 0.2x
First thing to perform is the following.
Make sure you perform multiple scans. One at 7...
i just got my DVB-S-card to work... I use it with the Astra/Hotbird satellites at 28,2 degrees east...
I did a scan of channels at...
Well... i guess that this is not possible... I did find an ACTION within MP called show_codec, but this does not work either... so i graphedit seems to be the way to go.
Well... i guess that this is not possible... I did find an ACTION within MP called show_codec, but this does not work either... so...
All,
Sorry...managed to post this thread in the root...hence the move of it...
This might be a very stupid question...but i...
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I will not get a perfect aspect ratio, right?
Isn't there a general cropping option that crops the top/left/right/bottom all at once so that the proper aspect ratio is never lost?
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I...
Are the cropping values in the Setup in pixels? If I increase the top value for example, I have to increase the other values or I...
hey jimbojumbo,
I think many users in oz have this same problem since the number of FTA channels seems less than other countries.
Here's how I got my TV Guide right:
1. Using notepad, open up the mytvguide.xml for your appropriate skin
2. Backup the original (e.g. mytvguide.bak)
3. Then find this section...
<control>...
hey jimbojumbo,
I think many users in oz have this same problem since the number of FTA channels seems less than other...
Hi all,
Just got my Media Portal installed and the EPG installed. Kudos to all involved, a magnificent effort)
The only query...
Also I have the same problem.
DVB-S2 card + Cyberlink H.264 + AnyDVD-HD.
AstraHD_Promo MPEG2 is OK but AstraHD_Promo H.264 don't play (black screen).
DVBViewer3.6 play H.264 channel.
Also with BlurayDisk it doesn't work. It show error "Insert Disk".
(PowerDVD7.3ultra play BD correctly)
sv (sorry 4 my english)
Also I have the same problem.
DVB-S2 card + Cyberlink H.264 + AnyDVD-HD.
AstraHD_Promo MPEG2 is OK but AstraHD_Promo H.264...
Hi,
Is-it possible to see a channel encode in H264 but not encrypted with MP ? (canal plus sport in evening).
Thanks
Can be changed, search for EPG display, amount of programs, or similar.
Yes many people find this annoying, But hey, MP is designed for the future and that does mean for the average user, many channels.
Can be changed, search for EPG display, amount of programs, or similar.
Yes many people find this annoying, But hey, MP is...
Please feel free to direct me to a provious thread, but for some reason all of my channels are showing twice in the TV Guide...
Sorry cannot give you a answer on this, do not even remember anyone posting the same query.
Does seem a bit strange the extra codecs being used, unless someone a lot wiser can give you a answer, do not know.
Strange some seem to be duplicated though.
Sorry cannot give you a answer on this, do not even remember anyone posting the same query.
Does seem a bit strange the extra...
Cause of the difference in hearing sound watching tv when I have timeshift on or off I want to ask, why the directshowfilters in...
Using DVB dual tuner works better as I don't have to bother with all the crappy MS patches to get both tuners working at once. Plus, as I currently use my desktop for MP currently, its great to be able to record without firing up MP (or forgetting to), and being able to stream to my laptop (most of the time!)
This thread has a...
Using DVB dual tuner works better as I don't have to bother with all the crappy MS patches to get both tuners working at once...
hi, i've been on a bit of a hiatus from the forums and the mediaportal website in general as i was extremely happy with the...
I found a solution to skip forward 3 hours with the forward button on my MS-remote, but doesn't work to skip backwards. I' have the same problem and want to skip back and forward one day (24 hours) Did you find a solution yet?
I found a solution to skip forward 3 hours with the forward button on my MS-remote, but doesn't work to skip backwards. I' have the...
The skip button (or replay) does the same thing in the guide as Ch/Pg up/down. It does a PageDown but then i have the 2 buttons...
JoeFedora
Please see this post, http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list
and follow the instructions, your card needs to be added to the supported list
to run inside mediaportal, or you need to setup TVengine3 (which should find your card on its own) with the TVserver.
Always think myself, nice...
JoeFedora
Please see this post, http://wiki.team-mediaportal.com/Add_TVCard_to_natively_supported_list
and follow the...
I have Digio2 USB2 receiver. Seems that mediaportal doesn't support usb 2receivers att all. Has anybody idea how it could work? Do...
Hi all, this is a copy from my post: (https://forum.team-mediaportal.com/showthread.php?p=104761#post104761)
"While I was testing SageTV I noticed that when I switch between cards, the buffer doesn’t get deleted. And also when I restart the computer after SageTV crashes (it crashed so many times v6) I can still watch the old...
Hi all, this is a copy from my post: (https://forum.team-mediaportal.com/showthread.php?p=104761#post104761)
"While I was...
Hi
I know this was well discussed in the past whether it is a good idea to have or not.
Would implementing an option in...
This is no longer a problem for me as I have a tv server setup that is now working fantastic!!
I don't know what the problem was with the previous tv engine tho I tried serveral time and had the same result everytime, i tried a fresh install, i tried the Microsoft patch from the above thread, all no joy!!
Hopefully it won't...
This is no longer a problem for me as I have a tv server setup that is now working fantastic!!
I don't know what the problem was...
I can't get media portal to work with 2 tuners.
Both work when the other is deselected using the tick boxes in the config, but...
Hi, I added those options. The newest vmr9 settings change the resizing algorithm to take advantage of your underlying video hardware. Your results may vary. Ideally, you should turn on non-square mixing and choose gaussian quad filter. There is currently not any checking to make sure your video card can actually implement the...
Hi, I added those options. The newest vmr9 settings change the resizing algorithm to take advantage of your underlying video...
Does anyone notice ant difference within MP when playing with antialiasing / anisotropic filtering?
Kev.
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it XYZ), and i can recive it from 3 different sources, how do i set this channel up.....
If i eg. can record the XYZ from both analoug antenna, DVB-s and DVB-t.....
It would be nice if i did not have to...
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it...
Hi there....
I am playing a little with a "problem", perhaps you have a solution.....;)
If i have a channel (lets call it...
Change default quality setting?
I am new to Mediaportal and I have a question.
What is the default quality setting that is selectable on the Recordings Page?
I see default, portable, low, medium and high quality options, but I have not been able to find which is default.
Is it possible to change this default value?
:thx: stefanbj
Change default quality setting?
I am new to Mediaportal and I have a question.
What is the default quality setting that is...
Hello,
I'm recording digital TV using a DVB-S card. I recognized that there is the possibility to set the quality for the...
found it:
<control>
<description>template for program title light area</description>
<type>label</type>
<id>24</id>
<visible>no</visible>
<label>-</label>
<font>font13</font>
<textcolor>FFFFFFFF</textcolor>
<animation effect="fade" time="250">WindowOpen</animation>...
found it:
<control>
<description>template for program title light area</description>
<type>label</type>...
Hey,
I've got a widescreen 32" TV and when viewing TV guide I have hard time reading TV guide due to the fact that it displays...