Operating System (11 Viewers)

Discuss everything about Operating Systems in here.
MP1 MP2 WSE 2019 / WSE 2022 DE
@ajs Thank you, that gives me the hope to try.
@ajs Thank you, that gives me the hope to try.
I‘m planning to create a new server that also should be used for a MP1 TV sever. But I should know if I can install and run the MP...
Replies
2
Views
544
Clean Boot Your System to Stop Launching of the DCFWinService at the System Startup
Clean Boot Your System to Stop Launching of the DCFWinService at the System Startup
Hello, DFS.AGENT.WinService uses 100% of CPU usage on windows 10 Laptop. So the CPU fan always runs to refresh the CPU. What is...
Replies
3
Views
1K
Yes, because Windows start all system services at first, like network, etc. this takes a time. MP2-Server is a service, but needs other services, like the network service or mysql in some cases. MP2 self is a autostart programm and these starts at first when all services are started. In my case I see now difference between Win 7 or...
Yes, because Windows start all system services at first, like network, etc. this takes a time. MP2-Server is a service, but needs...
Hello guys, I have moved to Windows 10 since a few months. Everything works fine so far. What bothers me is that the interface...
Replies
9
Views
2K
IMHO Make backup image of Win 7, Free upgrade Win 7 to Win 10, check actiovation, anf if Ok, reinstall Win 10 from scratch :)
IMHO Make backup image of Win 7, Free upgrade Win 7 to Win 10, check actiovation, anf if Ok, reinstall Win 10 from scratch :)
My HTPC has run pretty well for years with Win 7 Pro x64, but since MS is dropping support and a few problems have cropped up, I...
Replies
2
Views
1K
The only setting that I made is an automatic login. everything else does not interfere and works fine :):whistle::coffee:
The only setting that I made is an automatic login. everything else does not interfere and works fine :):whistle::coffee:
I have Windows 1o Pro - Version 1809. Is there a list exist for important or recommend settings for Win10 user? I try to optimize...
Replies
1
Views
2K
Sorry, but for me that is no real double posting. One is written in German and located in the germans subforum and one is here in English for not Germans. I do not think, that all Germans handle English quite well (maybe me included) and definetly not all "Not-German" understand German.....
Sorry, but for me that is no real double posting. One is written in German and located in the germans subforum and one is here in...
Hi, I am using mp really a long time, but when the system works fine I do not touch it. (Or my wife do not allow me to....) Now...
Replies
2
Views
3K
That's an assumption. It could be a compatibility issue between the DD tuner hardware/driver and the motherboard chipset hardware/driver and/or BIOS. In such cases the fault could be on either side. I cannot do anything with such problems. If you haven't already done so, please report the problem to DD and your motherboard vendor.
That's an assumption. It could be a compatibility issue between the DD tuner hardware/driver and the motherboard chipset...
Hi, since I have Windows 10 I have a lot of BlueScreens, just today it were 4 in sum. I'm really tired of the aweful driver...
Replies
10
Views
3K
Both of you should post logs as described here: http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/Submit_a_Bug_Report
Both of you should post logs as described here: http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/Submit_a_Bug_Report
I'm having an issue with MediaPortal 1 and Windows 10. Whenever I reboot my HTPC I have to manually access the network before I...
Replies
2
Views
2K
Okay. Thanks for letting me know. My workaround for the moment is to use the Exit MediaPortal (without options) button to close down MediaPortal - I used to use the Exit MediaPortal with options - and now use the power button on my remote to put the computer to sleep and then turn off the power to the computer. It's a bit clunky, bit...
Okay. Thanks for letting me know. My workaround for the moment is to use the Exit MediaPortal (without options) button to close...
I like my HTPC to shut down when I hit the power button on my remote control. The problem is that an MCE remote actually sends the...
Replies
3
Views
7K
Since Windows 10 TH2 upgrade from November 2016 my desktop icons reorganized themselves whenever I turned my HDMI TV off and back on. For a long time I could not figure how to fix that problem, I even had a Microsoft tech support looking at it for a few hours without being able to fix it either. Due to the various side effects each...
Since Windows 10 TH2 upgrade from November 2016 my desktop icons reorganized themselves whenever I turned my HDMI TV off and back...
Since Windows 10 TH2 upgrade from November 2016 my desktop icons reorganized themselves whenever I turned my HDMI TV off and back...
Replies
0
Views
2K
Yes. It is your configuration. You can set it to be whatever you like. :) No. As above. The file is created at install time and never changed by TV Server after that. Of course you can manually change it at any time, but most people don't. Personally I don't understand why this file would be any harder to remember than the other 2...
Yes. It is your configuration. You can set it to be whatever you like. :) No. As above. The file is created at install time and...
Hey Guys, For years I have never had MediaPortal TV server work over VPN. I never dedicated too much time to it, and just used...
Replies
8
Views
2K
I snuck in the upgrade tonight after the mrs went to bed.. works perfectly. no idea why I couldn't see that initially... going blind! thanks again
I snuck in the upgrade tonight after the mrs went to bed.. works perfectly. no idea why I couldn't see that initially... going...
After upgrading my MediaPortal in the living room from Windows 7 to 10 I noticed a new volume OSD in the top left corner of the...
Replies
68
Views
20K
Funny coincidence. I did this some three days ago and since then the receiver keeps staying operational after resume. However, I have not extensively tested this. It simply was there each time the PC woke up again. But the other setting(s) are certainly interesting. I was not aware that ther was a general way of deactivating energy...
Funny coincidence. I did this some three days ago and since then the receiver keeps staying operational after resume. However, I...
Tagging: @azzuro , @RicoHTPC , @Brudertac Hello community, Problem: The USB IR receiver is not functioning anymore after the...
Replies
36
Views
9K
Hi, I ran into something really weird this morning. I am running a WSE 2012 domain with a couple of domain members. This morning I woke up one of the clients and found the MePo homescreen to be frozen, showing the time of yesterday evening when I had switched off TV. The PC itself was still reactive, i.e. taskbar etc. functioning...
Hi, I ran into something really weird this morning. I am running a WSE 2012 domain with a couple of domain members. This morning...
Hi, I ran into something really weird this morning. I am running a WSE 2012 domain with a couple of domain members. This morning...
Replies
0
Views
2K
I upgraded mid august my HTPC following a catastrophic system hard drive failure of my Windows 7 installation. I've had issues with my Sound Blaster Z Dolby Digital Live failure but that got mostly fixed since TH2. Only running 4 PCs with Windows 10 now and I'm mostly a happy customer :) One annoyance I've had on my HTPC since TH2 I...
I upgraded mid august my HTPC following a catastrophic system hard drive failure of my Windows 7 installation. I've had issues with...
I just installed the new 1511 Win 10 upgrade and ran into a series of issues: All privacy settings are lost and reset to maxi!um...
Replies
6
Views
3K
i try it tool remove net = nothing !
i try it tool remove net = nothing !
Has anyone successfully installed MP2 on Windows 10? I installed MP2 on Windows 8.1 Home BEFORE upgrading. That seems to be fine...
Replies
11
Views
14K
Hello, I've recently successfully upgraded five PC from Win 7/ 8.1 to Win 10. Unfortunately I am now experiencing serious trouble when resuming from standby on two machines. The PCs are waking up, i.e. the power LED lights, but the monitor is staying black and the PC is unresponsive. I then need to reset the PC to get it working...
Hello, I've recently successfully upgraded five PC from Win 7/ 8.1 to Win 10. Unfortunately I am now experiencing serious trouble...
Hello, I've recently successfully upgraded five PC from Win 7/ 8.1 to Win 10. Unfortunately I am now experiencing serious trouble...
Replies
0
Views
2K
I am right in the middle of building my 1012 R2 server. 6 core 3.3mhz 16G ram 500G Sata Drive NEC D1-10 12T Raid connected thru dual ports fiber channel. Server runs real good. Installed and messing with Hyper-V. Have 2 virtual Win 7 machines so far. 1 for testing 1 for my web server. I am about 3 months into the build /...
I am right in the middle of building my 1012 R2 server. 6 core 3.3mhz 16G ram 500G Sata Drive NEC D1-10 12T Raid connected thru...
Hello, I am running Windows Server 2012 Essentials on my main server machine. After migrating a couple of clients to Windows 10 in...
Replies
5
Views
2K
Bad boy hehe
Bad boy hehe
Hi all, I have a Win 7 client and a Win 8 server PC. With all the hype of Windows 8, I was wondering if I should just stick with...
Replies
25
Views
10K
I got exactly the same problem. Also fresh Windows 8.1 Pro with MP 1.11 (Pre 11 Version) AMD Board (details in my specs) Catalyst version 14.9 It sometimes mutes for 1-2 seconds and than it works. Anybody can help both of us?
I got exactly the same problem. Also fresh Windows 8.1 Pro with MP 1.11 (Pre 11 Version) AMD Board (details in my specs) Catalyst...
After i install Windows 8.1 Pro i have problems with my HDMI Sound. Its mute for the first 1-2 Seconds and works after this first...
Replies
1
Views
2K
Btw I am trying some stuff on that stuttering_Playback 'wiki' post. But a lot of links there are really old. For instance I am trying to get Proppage.dll somewhere but I am not sure which to get that now. I am going to try Filmerit to check if I got some codec conflicts. Also I am not sure if I need to try an older CCC because from...
Btw I am trying some stuff on that stuttering_Playback 'wiki' post. But a lot of links there are really old. For instance I am...
Hello guys ! I recently bought a silent Sapphire HD6450 graphics card to replace my ASUS 490GT with fan. But it now has some...
Replies
5
Views
3K
I am just in the process of building a new MP Client for my main TV. I need a new copy of Windows and was wondering whether it might be worth considering Windows 8 - I have only ever used Windows 7. Is there any point/benefit in choosing Windows 8?
I am just in the process of building a new MP Client for my main TV. I need a new copy of Windows and was wondering whether it...
I am just in the process of building a new MP Client for my main TV. I need a new copy of Windows and was wondering whether it...
Replies
0
Views
2K
That's strange. Using WASAPI over Directsound would mean less latency between the player and the amplifier but my hazy understanding of audio sync is latency is handled by the standard automatically. If you're adjusting the audio delay do it in MP not your amp as the amp will adjust for everything it receives over the HDMI link which...
That's strange. Using WASAPI over Directsound would mean less latency between the player and the amplifier but my hazy...
As the thread title suggests, I'm having issues with Windows set to 5.1 speakers config. My HTPC is connected with an hdmi lead to...
Replies
32
Views
10K
unfortunately not, i never managed to passthrough the card. I ended up buying http://www.dvbshop.net/Digital-Devices-DuoFlex-S2-Extension extension for my http://www.dvbshop.net/Digital-Devices-Cine-C/T/T2-V7-Dual-DVB-C/DVB-T/T2-PCIe
unfortunately not, i never managed to passthrough the card. I ended up buying...
Hi, i have a problem with esxi and tvcard passthroughing. When i put in the tvcard esxi doesnt see the card, not in console or in...
Replies
10
Views
7K
Microsoft want publish a tool for help to upgrade Windows XP OS to WIN7 or Win8 http://blogs.windows.com/windows/b/windowsexperience/archive/2014/03/03/new-windows-xp-data-transfer-tool-and-end-of-support-notifications.aspx
Microsoft want publish a tool for help to upgrade Windows XP OS to WIN7 or Win8...
Microsoft want publish a tool for help to upgrade Windows XP OS to WIN7 or Win8...
Replies
0
Views
1K
How about attaching some logs ? - http://wiki.team-mediaportal.com/Forum/How_to_post_logs
How about attaching some logs ? - http://wiki.team-mediaportal.com/Forum/How_to_post_logs
Hello All, just for your Info: ISSUE: The latest "Windows 8.1" Update Rollup KB2889784 released yesterday on 11/13/2013 will brake...
Replies
3
Views
3K
How much memory does ESXI use before installing a VM, same with CPU I guess. I'm tempted to go down this route as my combined Server 2012 R2 with essentials Role and then VM'd server 2012 R2 with exchange is causing some problems with DVB-S feeds and I wondered if splitting them off using a bare metal hypervisor might give a better...
How much memory does ESXI use before installing a VM, same with CPU I guess. I'm tempted to go down this route as my combined...
I wanted to share my findings on setting up mediaportal tv server with a TBS 6981 tuner card under esxi 5.1. The short story is...
Replies
1
Views
4K
Hi there, I would suggest you check/swap the PSU. Sometimes you can have a fault with the 5V feed. Have you got another PSU you can test with? J.
Hi there, I would suggest you check/swap the PSU. Sometimes you can have a fault with the 5V feed. Have you got another PSU...
I've been running Win7 with MediaPortal since 2011 and have had no problems with the sleep functions. I have used PowerScheduler++...
Replies
1
Views
2K
MP1 MP2 Operating System DTS HD on Windows 8 (2 Viewers) DE
Hi, On the windows sound manager my onkyo is ok and the option dts hd is present. My cable is ok. Its ok with my bluray samsung and the same cable. Thks
Hi, On the windows sound manager my onkyo is ok and the option dts hd is present. My cable is ok. Its ok with my bluray samsung...
Hi Everybody, I come here after many search on the web, and if you can help me to solve my problem. My configuration ...
Replies
11
Views
12K
The devcon utility can be used to disable and re-enable devices. Having said that, it is highly highly unusual for such an action to be necessary for a GPU. Before recommending devcon, I'd recommend: Ensure you're running the newest official, stable driver. If the problem occurs in connection with MediaPortal, throw some log files...
The devcon utility can be used to disable and re-enable devices. Having said that, it is highly highly unusual for such an action...
Hi When my pc resumes from standby, I get artefacts on the display, I'm on Win7 64 ultimate, with built in hd4000 graphics...
Replies
2
Views
2K
Top Bottom