Hi all,
at the moment (0.2RC2 CVS from 2.1.) MP's DVD Navigator is not useable for me.
- there is no possibility to go to the DVD Menu (used to work with menu button)
- some DVD only show black screen (sound works)
- from fullscreen TV DVD's don't start at all (MP hangs)
- and some things more ...
So I integrated VLC as...
Hi all,
at the moment (0.2RC2 CVS from 2.1.) MP's DVD Navigator is not useable for me.
- there is no possibility to go to the...
Hi all,
at the moment (0.2RC2 CVS from 2.1.) MP's DVD Navigator is not useable for me.
- there is no possibility to go to the...
mama: Yeah, 'exit' - so close and yet so far :oops:
After having toyed with the irrremote.ini a bit, I found this bit quite useful
RED={run(d:\mediaportal\shutdown.bat)}
Placed in the [Default] section and with the following .bat line
shutdown -t 00 -s
Don't whether that's water under the bridge or not but since my MP...
mama: Yeah, 'exit' - so close and yet so far :oops:
After having toyed with the irrremote.ini a bit, I found this bit quite...
Hi folks,
this is a small tutorial which describes how to use your Hauppauge Remote with Media Portal using the remote software...
Hi guys,
I’m using BSPlayer as my movie player in MP. Since I wanted to use the Hauppauge remote also for this player I attached a section for the irremote.ini for BSPlayer according to Flipger’s description ( http://nolanparty.com/mediaportal.sourceforge.net/phpBB2/viewtopic.php?t=621 ). It took me quite a while to find the...
Hi guys,
I’m using BSPlayer as my movie player in MP. Since I wanted to use the Hauppauge remote also for this player I attached...
Hi guys,
I’m using BSPlayer as my movie player in MP. Since I wanted to use the Hauppauge remote also for this player I attached...
its a good tip (i have a compro t200 and i use its remote)
but someone allready posted it a while ago
edit : https://forum.team-mediaportal.com/viewtopic.php?t=8989
its a good tip (i have a compro t200 and i use its remote)
but someone allready posted it a while ago
edit ...
Just a tutorial i put 2gether
Step 1:
Get HIP from here: http://www.byremote.com.au/downloads/download.asp?SID=1
and install...
I bought a DVI to HDMI converter, set my resolution to 1280*720 (which is what I used previously with component) and now not only do I have a crisp and clear DVB-T picture (which I had with component) but my analog input is now crisp & clear and just as good if not better than direct input to the TV.
It's unbelievable the...
I bought a DVI to HDMI converter, set my resolution to 1280*720 (which is what I used previously with component) and now not only...
This topic is about using standard definition resolutions for Media Portal which are 720x480 to NTSC and 720x576 for PAL should...
if you have an iPod, you have iTunes and you have playlists in iTunes. If you want to share them with MediaPortal, see here: http://www.maisenbachers.de/dokuw/howto:mymusic:useitunesplaylists
if you have an iPod, you have iTunes and you have playlists in iTunes. If you want to share them with MediaPortal, see here...
if you have an iPod, you have iTunes and you have playlists in iTunes. If you want to share them with MediaPortal, see here...
I even have a motherboard with both SPDIF in and out so they do exist! I'm only using the SPDIF out though... I also have a PVR-150 where I hook up my STB's audio out into the 150's Line-in.
This is not an answer to the original poster's question but rather a gotcha that one should be aware of...
The problem with the PVR is...
I even have a motherboard with both SPDIF in and out so they do exist! I'm only using the SPDIF out though... I also have a PVR-150...
Sorry that I post my problem again but nobody answered and maybe my formulation was not good ...
Can I use the spdif (optical)...
hi!
but you can't play more then one file. if you want to play movie_part01 and movie_part02 you will need a playlist and a way to tell vlc to play this playlist. i have written a script for myhtpc which generates a temp playlist on the fly. this script won't work with mp. have to take a look into it. but it would be much nicer...
hi!
but you can't play more then one file. if you want to play movie_part01 and movie_part02 you will need a playlist and a way...
In my opinion, the hardest part of configuring MediaPortal for a fresh install of WindowsXP is to setup all the codecs.
I'm no...
The disadvantage of using say a 32KB cluster is that a 1 byte file will actually take up 32KB on disc, so if you have many small files you end up wasting large amounts of storage space.
In Windows Explorer right-click on a small file (try and kind one under 4KB) and choose Properties, there you'll see two sizes reported, the actual...
The disadvantage of using say a 32KB cluster is that a 1 byte file will actually take up 32KB on disc, so if you have many small...
If you have one or more hard drives dedicated to the storage of recordings and movie files (i.e. large files) and you're going to...
Well, not quite...
I have MP 0.1.2.0 and the USBUIRT and it is not working at all. You can see my original post here (http://nolanparty.com/mediaportal.sourceforge.net/phpBB2/viewtopic.php?t=7801). The USBUIRT will not change the channels even though I already have them set to external. Plus, the USBUIRT doesn't even light up it's...
Well, not quite...
I have MP 0.1.2.0 and the USBUIRT and it is not working at all. You can see my original post here...
Thanks to Jon from USBUIRT who donated a system to frodo and MANY thanks to frodo who kind of "outsorced" the transmission codes to...
I confirmed that my SWANN Opti-ViewCam WEBCAM works in the MY TV section
Heres a guide to make it work (all USB webcams should work)
http://dott.lir.dk/mediaportal/forum/viewtopic.php?t=381
I confirmed that my SWANN Opti-ViewCam WEBCAM works in the MY TV section
Heres a guide to make it work (all USB webcams should...
I confirmed that my SWANN Opti-ViewCam WEBCAM works in the MY TV section
Heres a guide to make it work (all USB webcams should...
A quick tip (learnt the hard way!) if you are using a USB soundcard (E.G. Soundblaster Extigy) and a USB capture card (E.G. Hauppauge WinTV-PVR USB2) even if they are both USB2 (and should therefore have the bandwidth to cope) do not connect them to the same controller on your PC. Most PC's now have 4 (or more) USB ports on the back...
A quick tip (learnt the hard way!) if you are using a USB soundcard (E.G. Soundblaster Extigy) and a USB capture card (E.G...
A quick tip (learnt the hard way!) if you are using a USB soundcard (E.G. Soundblaster Extigy) and a USB capture card (E.G...
Hey all, I spent the time to make a logo image for each channel on my cable service (out of Phoenix, Arizona). I started off using the swedish .psd file and decided to size the logos at 32x32 pixels. I found that if the images are bigger, they end up getting resized down on the tv and in the webinterface which I use frequently. So...
Hey all, I spent the time to make a logo image for each channel on my cable service (out of Phoenix, Arizona). I started off using...
Hey all, I spent the time to make a logo image for each channel on my cable service (out of Phoenix, Arizona). I started off using...
Also... so is that to say that its Impossible or that you just don't approve? Also... there is a thin white slot on my card WinTV HVT-1100 about an inch long? That anything to do with it?
Also... so is that to say that its Impossible or that you just don't approve? Also... there is a thin white slot on my card WinTV...
HI,
I'm in the UK. I've got a Hauppauge HVT-1100 and I'm running the latest version of MediaPortal (Downloaded today :) ). This...
Hello I thought some people here would like a better codec pack, @swgreed at MSFN.org made and continues to update what I consider the best Codec Pack on the Internet.
http://www.msfn.org/board/index.php?showtopic=14614
I also have a Silent Codec Pack for DirectShow Filters...
Hello I thought some people here would like a better codec pack, @swgreed at MSFN.org made and continues to update what I consider...
Hello I thought some people here would like a better codec pack, @swgreed at MSFN.org made and continues to update what I consider...
Has anyone else noticed that editing the DVB-t details in the config doesn't work anymore with any 0.2.x.x version including svn
As soon as you run MP and select the channel the changes are wiped from the database and have no affect.
The changes are saved because reopening the config after changes have been made shows they are...
Has anyone else noticed that editing the DVB-t details in the config doesn't work anymore with any 0.2.x.x version including svn...
--------------------------------------------------------------------------------
Yes it can be done! Its easier than you might...
Your Twinhan configuration is not working for BDA drivers >= 1.2.1.8 anymore.
Use the newest driver (1.2.1.9) from www.DigitalRise.biz and the configuration from http://www.kiwi07.pwp.blueyonder.co.uk/Cards/CaptureCardDefinitions.xml
Martin
Your Twinhan configuration is not working for BDA drivers >= 1.2.1.8 anymore.
Use the newest driver (1.2.1.9) from...
Hi folks,
after reading this forum fo a while, finally got my Typhoon/Twinhan card running. Stil needs some performance tuning...
Has anyone managed to get this app to work with the ADS Tech Instant TV DVB-T PCI remote?
I think it does the same thing - using a proprietary exe to send keystrokes to the TV app..
I'm not sure though.. (is there another way to get that remote working with MP?)
Has anyone managed to get this app to work with the ADS Tech Instant TV DVB-T PCI remote?
I think it does the same thing -...
G'day i have recently purchased a twinhan dtv card (rebranded) and i wanted to make the remote completely work with MP, however i...
Some things such as the default time before killing non-responding apps at shutdown can cause problems. Generally 10 seconds is fine but I wouldnt go lower, because a lot of settings wont be saved properly on shutdown.
Its obviously preSP2 as well as their method for disabling WFP wont work anymore.
Clearing pagefile on shutdown...
Some things such as the default time before killing non-responding apps at shutdown can cause problems. Generally 10 seconds is...
First, I am not sure where to post this so if the moderators wish to move it please do so. With that said on with the post.
I...
I had problems with TV losing sync (flashing black and white / a little bit badly formed picture) for a short period with my NVidia 5200 when :
1) timeshifting was turned on / off
2) channel was changed with timeshifting on
Enabling "Force TV Detection" in Display properties -> Advanced -> NVidia tab -> Tools solved this.
I had problems with TV losing sync (flashing black and white / a little bit badly formed picture) for a short period with my NVidia...
I had problems with TV losing sync (flashing black and white / a little bit badly formed picture) for a short period with my NVidia...