Check out the snapstream.com companys expensive BTV, they are damn slow to get anything done even though they were some of the first to make a "HTPC" friehdly PVR. They are just making their product less and less attractive for every one out side the U.S. and Canada!
And there are hardly any plug ins for BTV!
I've found out that...
Check out the snapstream.com companys expensive BTV, they are damn slow to get anything done even though they were some of the...
I have a VisionPlus DVB-T card and have been waiting and waiting and waiting for DVB support to be included in MediaPortal. It...
I'm using version 0.1.0.0
but the chnlup and down are not working, mapped them to {f7} and {f8} but it does not seem to work.
anyone an idea?
probably I have edit the chnlup and down in the incorrect section of the ini file
I am only using the remote to start start MP, control MP and turn down the computer
do I really...
I'm using version 0.1.0.0
but the chnlup and down are not working, mapped them to {f7} and {f8} but it does not seem to work...
I changed my irremote.ini file so MP can use the new hauppauge remote more effectively. There are about 9 buttons that aren't...
Hi scope,
I hving problem with my happauge remote when I am in MP - My TV Fullscreen more. When I switch My TV in fullscreen, the remote did not response to any button.
I am using MP version 0.1.0.10, I found that I when switch to fullscreen, the program title wil change to "Media Portal - My TV/fullscreen". I have edit the...
Hi scope,
I hving problem with my happauge remote when I am in MP - My TV Fullscreen more. When I switch My TV in fullscreen...
I asked frodo to set the program title of the program to like "MediaPortal - My TV" for use with hauppauge ini-file. You managed to...
Crash.
1. MPGAUDIO.AX is only needed if you want to use the generic DVD codecs to play back the AC3 stream in an AVI file. You have FFDShow installed and therefore this will handle it for you.
2. Post a detailed question in the General Support forum
DMAN
Crash.
1. MPGAUDIO.AX is only needed if you want to use the generic DVD codecs to play back the AC3 stream in an AVI file. You...
I worked several hours on that issue until I realized that I made everything right from the beginning and that just my receiver was...
Its easy. At the end of the day the most important thing is getting the content in there. Even if its messy, someone else can help tidy it up. If you want to know how to write the basic syntax, see here:
http://www.maisenbachers.de/dokuw/wiki:syntax
However the edit boxes on our wiki has buttons for things like bold, text...
Its easy. At the end of the day the most important thing is getting the content in there. Even if its messy, someone else can...
just found this: http://htpcnews.com/forums/index.php?showtopic=2117
All technical shortcuts explained.
A big old warning here. It sucks. Playing back xvid files with advanced features (qpel. gmc etc) causes major artifacting and crashes. To get rid of this nuisance while keeping the pristine dvd codecs, simple open a command prompt window and do the following.
cd \program files\intervideo\dvd6
regsvr32 /u mp4vdec.ax
That...
A big old warning here. It sucks. Playing back xvid files with advanced features (qpel. gmc etc) causes major artifacting and...
A big old warning here. It sucks. Playing back xvid files with advanced features (qpel. gmc etc) causes major artifacting and...
I have a gyration mouse and keyboard. These are wireless (radio) and have really good range (I have a large lounge and 50" Axium display) over 30 feet. The keyboard is small and the mouse can be used on the bench like a normal mouse or in the 'air' like a wand.
I have a gyration mouse and keyboard. These are wireless (radio) and have really good range (I have a large lounge and 50" Axium...
I found a cool keyboard which is quite small and works cableless via infrared. It has a mouse build in and some extra keys...
Hello, Im new with MP, started up with it yeasterday and been tweaking it all the time.
I own a Remote Wonder II but can't get it working properly, it's not X10 series remote so Key Master or Factory won't work with it... Is there some other way to get it fully functionable? Doing own configurations ain't a problem for me. If...
Hello, Im new with MP, started up with it yeasterday and been tweaking it all the time.
I own a Remote Wonder II but can't get...
Hello There,
I searched the forum for days looking at a way to use my ATI RW instead of the Hauppage remote that came with the...
Simple answer is you are reading a rather old thread. You dont go back to old ones so just go to latest 0107. Dont patch the newer one with this old version. Plus those listed drivers are old, the 90002 model card now has 1.3 drivers.
Simple answer is you are reading a rather old thread. You dont go back to old ones so just go to latest 0107. Dont patch the newer...
This is how I got mine working from a new MP 0.1.0.5.1 installation.
1. Uninstall any drivers you already have in place for the...
Medial Player simply doesn´t work in the tv mode with my card;
When I run the setup inside MP it gives me some errors, wich don´t occur on the other setup;When I try to watch tv, the button´s "card" and "Channel" are darkened, unabling me to acess them...How can I solve This ?
Medial Player simply doesn´t work in the tv mode with my card;
When I run the setup inside MP it gives me some errors, wich...
Medial Player simply doesn´t work in the tv mode with my card;
When I run the setup inside MP it gives me some errors, wich...
Ok....
Ok then... perhaps I didn't see it... I'm quite new to MP.
Sorry.
Yuval.
P.S
I hope there's something else I can contribute to this great project...
Ok....
Ok then... perhaps I didn't see it... I'm quite new to MP.
Sorry.
Yuval.
P.S
I hope there's something else I can...
Hi everyone!
I tried repeatedly to set Media Portal as the windows shell (to make the boot proccess faster and to prevent...
Personally I just unzipped the xmltv executables into C:\Program Files\Team MediaPortal\MediaPortal\xmltv ...So when I run xmltv.exe etc, the tvguide.xml downloads right there. Seems to work. :)
Personally I just unzipped the xmltv executables into C:\Program Files\Team MediaPortal\MediaPortal\xmltv ...So when I run...
USA XMLTV for noobs
1. Download
a. Install it, somthing like c:\xmltv
2. Goto start run and type
cmd (enter)...
I found that the profile suggested by Kanedo worked well for me once i updated the profile using 1Spoon's suggestion.
I have found that there are some good and bad things about the remote. Good: nice ability to close and minimize in any application. Bad: poor range , not always responsive if i haven't pressed a button in...
I found that the profile suggested by Kanedo worked well for me once i updated the profile using 1Spoon's suggestion.
I have...
I developped a native MP profile for the Firefly remote. No need anymore to use girder to drive MP with the Firefly remote. if...
Found a way to turn off visualizations and album art in Windows Media Player and therefore also in mp.
You can download and install the Windows Media Bonus Pack for Windows XP:
http://www.microsoft.com/windows/windowsmedia/download/bonuspack.aspx
In this package there is a Null Visualization plugin that offers a new option to...
Found a way to turn off visualizations and album art in Windows Media Player and therefore also in mp.
You can download and...
Found a way to turn off visualizations and album art in Windows Media Player and therefore also in mp.
You can download and...
Thank you for the excellent tip PJ. I (from US), built my reciever from parts at radio shack costing about $6 total. Here is the site:
http://lnx.manoweb.com/lirc/
It works well but now you got me too excited. Connecting the serial to WOL pins makes sense. Wasn't thinking of this before. Thank you very much.
Thank you for the excellent tip PJ. I (from US), built my reciever from parts at radio shack costing about $6 total. Here is the...
Do do the maintenance on my htpc I use RealVNC. So why stand up and switch the htpc on. There must be a way to do that with...
Update: I have used XPlite to successfully remove XP components in an existing installation. It works great and creates a system restore point... but it's not free.
Homepage: http://www.litepc.com/xplite.html
Update: I have used XPlite to successfully remove XP components in an existing installation. It works great and creates a system...
Hello. I read on some other topic on using nLITE to build a stripped down version of the XP CD. Mark all the options you dont...
Which version of MP do you use?
I have installed version 1.08 and heve no problems.
What type of Pinnacle card do you have? I use the Pinnacle PCTV PRO, but Timeshift doesn't work.
Which version of MP do you use?
I have installed version 1.08 and heve no problems.
What type of Pinnacle card do you have...
Hi, i am using MP for about 2 months now. And it is great, everything works even my IR remote control from my pinnacle capture...
Hello I thought some people here would like a better codec pack, @swgreed at MSFN.org made and continues to update what I consider the best Codec Pack on the Internet.
http://www.msfn.org/board/index.php?showtopic=14614
I also have a Silent Codec Pack for DirectShow Filters...
Hello I thought some people here would like a better codec pack, @swgreed at MSFN.org made and continues to update what I consider...
Hello I thought some people here would like a better codec pack, @swgreed at MSFN.org made and continues to update what I consider...
Unfortunately DLR does not have the complete set of images. When you get them from weather.com, all pictures are the same, only the graphics change, which causes a really nice effect. Give it a try! ;-)
Unfortunately DLR does not have the complete set of images. When you get them from weather.com, all pictures are the same, only the...
For those who do not have the correct images, here are the URLS for Germany: :wink:
Satellite image...
Hi,
if someone is still looking for a way to control MP via remote (Technisat TS35, SS2 official remote control), I've updated a gml file I've found around and it is working perfectly (together with Winlirc).
Which is the best way to share it?
Hi,
if someone is still looking for a way to control MP via remote (Technisat TS35, SS2 official remote control), I've updated a...
Hi,
if someone is still looking for a way to control MP via remote (Technisat TS35, SS2 official remote control), I've updated a...