Tips and Tricks (18 Viewers)

Post your Tips and Tricks in here.
Since AC3 filter got MM merged into it ... should non-pass through ac3filter be possible now ... such that configure ac3 filter to upmix stereo to 5.1 and send it out sp/dif as ac3 and still allow ac3 to be passed through for like ac3 divx movies and dvd's? between these forums and ac3filter forums i am hoping to find a solution to...
Since AC3 filter got MM merged into it ... should non-pass through ac3filter be possible now ... such that configure ac3 filter to...
Download ffdshow https://sourceforge.net/project/showfiles.php?group_id=53761&package_id=59355 Set the AC3 and DTS in audio...
Replies
2
Views
8K
I can't get dvrmstoolbox working. It give me a clsid error: COM object with CLSID {3EBC8DFD-87ED-4E41-B02A-ADC97C0F8FC1} is either not valid or not registered I think that this com object is cyberlink mpeg muxer, but I have it registered with a different clsid. Has anyone any suggestion to solve this problem? Thanx in...
I can't get dvrmstoolbox working. It give me a clsid error: COM object with CLSID {3EBC8DFD-87ED-4E41-B02A-ADC97C0F8FC1} is...
While there are a ton of programs out there for compressing DVR-MS files, Crunchie best suits my needs. Crunchie differs from other...
Replies
11
Views
8K
A
MP1 MP2 Girder config file for mp (1 Viewer) DE
peterk: The Hauppauge IR is well supported by mediaportal by using a extendet irremote.ini file. you can find it in tips & tricks or the wickipages ready for download. Unless you want to use girder for some other reason. tomtom21000
peterk: The Hauppauge IR is well supported by mediaportal by using a extendet irremote.ini file. you can find it in tips & tricks...
this is a very basic gml file to be used with girder to remotely control mp. you'll need girder setup properly for this file to be...
Replies
7
Views
8K
MP1 MP2 Sorting TV Channels DE
Sorting tv channels is possible in tools->options / tvguide 1. you can sort clicking on any column header 2. you can drag & drop tv channels to a place you want 3. you can select a channel and use the up/down buttons Frodo
Sorting tv channels is possible in tools->options / tvguide 1. you can sort clicking on any column header 2. you can drag & drop...
Sorting tv channels is possible in tools->options / tvguide 1. you can sort clicking on any column header 2. you can drag & drop...
Replies
0
Views
8K
Also... so is that to say that its Impossible or that you just don't approve? Also... there is a thin white slot on my card WinTV HVT-1100 about an inch long? That anything to do with it?
Also... so is that to say that its Impossible or that you just don't approve? Also... there is a thin white slot on my card WinTV...
HI, I'm in the UK. I've got a Hauppauge HVT-1100 and I'm running the latest version of MediaPortal (Downloaded today :) ). This...
Replies
3
Views
7K
Your Twinhan configuration is not working for BDA drivers >= 1.2.1.8 anymore. Use the newest driver (1.2.1.9) from www.DigitalRise.biz and the configuration from http://www.kiwi07.pwp.blueyonder.co.uk/Cards/CaptureCardDefinitions.xml Martin
Your Twinhan configuration is not working for BDA drivers >= 1.2.1.8 anymore. Use the newest driver (1.2.1.9) from...
Hi folks, after reading this forum fo a while, finally got my Typhoon/Twinhan card running. Stil needs some performance tuning...
Replies
4
Views
7K
MP1 MP2 Country codes DE
THIS IS THE FORMAL CHANNEL ALLOCATION IN POLAND (the frequencies are almost the same in other European countries except for UK that allocates only puny 69 TV channels) email me at: ten.emohtfos@nosnibor.egroeg (spelled backwards) if you want this list in a nice MS-Excel chart: Regards, George Stereo Encoding: A2...
THIS IS THE FORMAL CHANNEL ALLOCATION IN POLAND (the frequencies are almost the same in other European countries except for UK...
For complete list of all country codes look here...
Replies
3
Views
7K
Anonymous
A
You just saved me a couple of hours of hair pulling! And I only have a few hundred entries in movide DB! Before adding indexes configurator just slams CPU to the top, now it's vay much faster. Thanks!
You just saved me a couple of hours of hair pulling! And I only have a few hundred entries in movide DB! Before adding indexes...
I just migrated my MythTV video database to MediaPortal with much SQLing/Regex replacing. It had over 6,000 movie entries and media...
Replies
11
Views
7K
I have installed the donor comskip program. It is installed in c:\Program Files\Comskip\comskip.exe the program works great by clicking on a .ts file. It will not auto run from TVserver. From TVservice.log [2015-04-09 19:10:12,637] [Log ] [scheduler thread] [INFO ] - ComSkipLauncher: Recording ended (M:\Team...
I have installed the donor comskip program. It is installed in c:\Program Files\Comskip\comskip.exe the program works great by...
Install comskip: 1. Download the latest Comskip release: http://www.kaashoek.com/comskip/files/ 2. Unzip the comskip file to Your...
Replies
2
Views
7K
Funny :)
Funny :)
Have been spying at meedio forums ;) http://www.gosing.com/ # works fullscreen # only small .exe (330kb) # freeware #...
Replies
1
Views
7K
Anonymous
A
I know MP doesn't use them, but what if you had front and back covers for each album? Sam
I know MP doesn't use them, but what if you had front and back covers for each album? Sam
Howdy. I've just gone through the painful process of building a CD cover DB of all my MP3's for Media Portal so I thought I might...
Replies
6
Views
7K
The link for the xmltv.zip file is not working. Any mirrors? Thanks.
The link for the xmltv.zip file is not working. Any mirrors? Thanks.
Currently right now the Zap2it plug-in in not working with the new TV engine. Because the new TV engine is all about TV and you...
Replies
13
Views
7K
I extracted the below data form a settings file for a humax set top box and converted it to MP .tpl format. Cannot claim that it is complete but it might be a useful starting point. In order to use the data simply cut and paste the required sections for the sats your dish can see into suitably named .tpl files. Satellite...
I extracted the below data form a settings file for a humax set top box and converted it to MP .tpl format. Cannot claim that it...
I extracted the below data form a settings file for a humax set top box and converted it to MP .tpl format. Cannot claim that it...
Replies
0
Views
7K
All you need is the stream address, I belive. Old post, but still very useful :D Perhaps this can make IP-radio more attractive? http://www.hardware.no/nyheter/programvare/norsk_nettradio_blir_gratis/32686
All you need is the stream address, I belive. Old post, but still very useful :D Perhaps this can make IP-radio more attractive...
Here are some radio playlistfiles for norwegian radiochannels. Just put them in your radio playlist folder, or specify folder in...
Replies
8
Views
6K
A
Hi all, i was missing a Jukebox feaure in MyMusik for log Party's. To let it play MP3 files for random and let the guest select there own musik. I have found two grate programms for that. Both can be integrated into MediaPortal and are ful skinnable. So you can change the UI to fit into the MediaPortal if you don't likne the...
Hi all, i was missing a Jukebox feaure in MyMusik for log Party's. To let it play MP3 files for random and let the guest select...
Hi all, i was missing a Jukebox feaure in MyMusik for log Party's. To let it play MP3 files for random and let the guest select...
Replies
0
Views
6K
Anonymous
A
Test the following... Start > Settings > Control Panel > System > Hardware > Device Manager > Univeral Serial Bus Controllers > now search for the usb root hub where your remote is listed under the power tab ! If you found it, go to the power management tab and disable the option : Allow the computer to turn off this device to...
Test the following... Start > Settings > Control Panel > System > Hardware > Device Manager > Univeral Serial Bus Controllers >...
Hi Guys - Seems some people can and some can't... I used this as a guide during a recent new box install and other than...
Replies
8
Views
6K
MP1 MP2 DVR-MS to AVI!!! DE
Hi, Here is a way to convert DVR-MS files to AVI!!!... You will need the following files installed to get the right DirectShow Filters... Elcard MPEG decoder: http://www.elecard.com/ftp/pub/mpeg/decoder/EMpgDec20.zip A MP3 Encoder: I used Fraunhofer MP3 Codec Pro :wink: Divx Codec: http://www.divx.com/divx/ Graph Edit...
Hi, Here is a way to convert DVR-MS files to AVI!!!... You will need the following files installed to get the right...
Hi, Here is a way to convert DVR-MS files to AVI!!!... You will need the following files installed to get the right...
Replies
0
Views
6K
  • Poll
run async hide "C:\Program Files\SnapStream Media\Firefly\Firefly.exe" run "C:\Program Files\Team MediaPortal\MediaPortal\MediaPortal.exe" the above is the logon.txt file I use with scriptedlogon, gets my firefly operating.
run async hide "C:\Program Files\SnapStream Media\Firefly\Firefly.exe" run "C:\Program Files\Team...
well this one would be interesting for all the owners of a real HTCP, thus those where MP should be the only meaning of usement...
Replies
21
Views
6K
Thanks Taipan. Schoolboy error - not checking I had the latest drivers. Works fine now. thanks again. Sy
Thanks Taipan. Schoolboy error - not checking I had the latest drivers. Works fine now. thanks again. Sy
I found this ATI knowledge base article; 737-22853: 50Hz refresh rate not available for European TV, HDTV and projectors...
Replies
16
Views
6K
Thanks Brocklander. Great tips, will try it out. 8) Regards Roy
Thanks Brocklander. Great tips, will try it out. 8) Regards Roy
This is the simplest tool to use I have found for manually cropping length and cutting pieces (like ads) out of your DVR-MS files...
Replies
2
Views
6K
MP1 MP2 Resetting MCE remote (1 Viewer) DE
Yet another one ... maybe post URL Hi, here's another request for the manual. Maybe a good idea to post the manual. Meanwhile please send me via email
Yet another one ... maybe post URL Hi, here's another request for the manual. Maybe a good idea to post the manual. Meanwhile...
Not quite sure if this is a difficult tip to work out, but thought it good to share with others who have the same problem. I...
Replies
12
Views
6K
MP1 MP2 Installation Guide DE
Cheers for the tips will add them in, i realise theres multiple ways to do most things with windows etc so its always good to have alternative methods aswell,
Cheers for the tips will add them in, i realise theres multiple ways to do most things with windows etc so its always good to have...
Hi Guys I have just put together an Installation Guide for a mate of mine who wants to install MP so thought i would post a link...
Replies
11
Views
6K
A
HTPC/PVR Hebrew forum at hometheater.co.il You are all welcome to join the most active Hebrew site on HTPC/PVR forum at: :arrow: http://www.hometheater.co.il/modules.php?name=Forums&file=viewforum&f=12 Enjoy and see you there :) AdiLev The forum manager of HTPC at Hometheater/Israel .... p.s. Hebrew knowledge...
HTPC/PVR Hebrew forum at hometheater.co.il You are all welcome to join the most active Hebrew site on HTPC/PVR forum at...
Quick Guide to Using Hebrew with MP 0.1.2.0 General First, let me explain that this Quick Guide does not explain how to make...
2 3
Replies
20
Views
6K
Anonymous
A
Works perfectly cheers man.
Works perfectly cheers man.
This is a tip for people using the - Hauppauge mpeg2 decoder (comes with the Hauppauge PVR cards) - or the intervideo mpeg2...
Replies
2
Views
6K
Thanks for the tip. I'll take a look at that
Thanks for the tip. I'll take a look at that
I have written a couple of .bat scripts that will use open source/freeware software to: rip and burn dvds (sorry no dvd9 to dvd5...
Replies
18
Views
6K
Ovidio
O
L
Hi, Can someone indicate where to download the file set (as I have only XP Home edition too). This would be fantastic! Thanks in advance
Hi, Can someone indicate where to download the file set (as I have only XP Home edition too). This would be fantastic...
Harley and everyone else who has problem with MCE philips remote: this is how I got it working: In the hardware section, topic...
Replies
3
Views
6K
Crash. 1. MPGAUDIO.AX is only needed if you want to use the generic DVD codecs to play back the AC3 stream in an AVI file. You have FFDShow installed and therefore this will handle it for you. 2. Post a detailed question in the General Support forum DMAN
Crash. 1. MPGAUDIO.AX is only needed if you want to use the generic DVD codecs to play back the AC3 stream in an AVI file. You...
I worked several hours on that issue until I realized that I made everything right from the beginning and that just my receiver was...
Replies
13
Views
6K
an all-in-one tool to do a lot of things like this from the command line is nircmd. http://www.nirsoft.net/utils/nircmd.html I use this to switch resolutions from my remote, and a bunch of other things. Very useful..
an all-in-one tool to do a lot of things like this from the command line is nircmd. http://www.nirsoft.net/utils/nircmd.html...
Hi, I've read around on these forums alot (including searching ALOT) and found that dual displays are not supported in MP. So...
Replies
4
Views
6K
the link seems to change... so i guess he did some editing yesterday as he has released a new version today! i have just linked the homepage now and the help can be found on here. look on the left hand side. The link you have is for the command line program behind the DVDAuthorgui progam :) thanks for taking the time to look...
the link seems to change... so i guess he did some editing yesterday as he has released a new version today! i have just linked...
OK so the title sounds like a Spam Message but it isn’t.... Im going to attempt to tell you how to cut those annoying ad's out...
Replies
4
Views
6K
hi... Cheetah05. any chance of doing a Film4+1 logo.. .and any update on the radio logos ?
hi... Cheetah05. any chance of doing a Film4+1 logo.. .and any update on the radio logos ?
Due To requests from an earlier post i have made my updated logos available for download, i would like to make sure everyone is...
Replies
17
Views
5K
Top Bottom