- Sticky
I know this is an old thread, but does somebody have " FloppyDTV LED Sequence explanation " document laying around ?
My card is acting strange with 7 flashing then green (very short) and start over again.
Thanks
Kickin
I know this is an old thread, but does somebody have " FloppyDTV LED Sequence explanation " document laying around ?
My card is...
if you have some problems with the FloppyDTV S2 not beeing recognized after standby/shutdown please have a look at this info:
- Sticky
The MediaPortal HTPC Hardware Section may already have the information you require so check it first
HTPC Hardware Section:
http://wiki.team-mediaportal.com/4_HTPC/HTPC_Hardware
HTPC TV Cards Section:
http://wiki.team-mediaportal.com/4_HTPC/HTPC_Hardware/TV_Cards
HTPC Showroom:
http://wiki.team-mediaportal.com/4_HTPC/Showroom
Is...
The MediaPortal HTPC Hardware Section may already have the information you require so check it first
HTPC Hardware Section...
The MediaPortal HTPC Hardware Section may already have the information you require so check it first
HTPC Hardware Section...
^^ its on my list!
I had some luck last night and have updated my thread. Still have continuity errors in my logs but the picture seems smooth.
I will stop posting here now and follow this up here https://forum.team-mediaportal.com/television-mytv-frontend-tv-server-90/hd-tv-blocky-artifacting-sd-fine-104031/index2.html
^^ its on my list!
I had some luck last night and have updated my thread. Still have continuity errors in my logs but the picture...
Hi
I have just installed a BlackGold BGT3620 DVB-T2 card. On initial TV Server Configuration scan, using default...
Hello and welcome schwarzrz
You will need to stick with 1.2.1 or 1.2.2 for the moment. It would help if you could post your logs so that I can check exactly what the TV Server is doing:
http://wiki.team-mediaportal.com/Forum/How_to_post_logs
mm
Hello and welcome schwarzrz
You will need to stick with 1.2.1 or 1.2.2 for the moment. It would help if you could post your logs...
Just got one of these to replace my pair of s2-3200 cards since they are flaky under win7 and support from tt seems to be non...
Thanks. Now I got it to work. Also TV3. :)
Thanks. Now I got it to work. Also TV3. :)
Please share your experience if you are using this card with MP. Tried searching the forums, but not much there (which might be...
Hi everyone
BSODs generally indicate hardware or driver issues, but they can be triggered by software doing things in specific ways that the drivers don't like.
I have a version 2.0. It looks quite similar to version 2.1 - just lower quality capacitors I think. Works fine.
I understand that you are frustrated, however blaming...
Hi everyone
BSODs generally indicate hardware or driver issues, but they can be triggered by software doing things in specific...
Is the TeVii S480 Dual DVB-S2 HDTV PCIe supported by MediaPortal?
TeVii S480 Dual DVB-S2 HDTV PCIe Diseqc 1.2/2.0 Low profile -...
Glad to see that you managed to solve the problem. I hope they replaced the broken tuner. All these tuners are made in China, and I believe they do not do so high standard quality checking, resulting on faulty cards on market. And not just DVBSky, but all the other brands.
These are excellent cards, after thorough testing I can say...
Glad to see that you managed to solve the problem. I hope they replaced the broken tuner. All these tuners are made in China, and I...
Morning,
My TBS6981 gave in last week. I don't think mine suffered any temperature related issues, but I have read that they run...
Quality mate. I will try this ASAP! Thanks for your help!
Quality mate. I will try this ASAP! Thanks for your help!
I need some help / info regarding running a DVBS2 card on a mobo that has legacy pci interface.
I decided that it was about time...
Just be sure to stop tve3 before starting mp2 server with tve3.5 plugin ;)
Just be sure to stop tve3 before starting mp2 server with tve3.5 plugin ;)
Hi!
I'm currently running my HTPC with a DVB-C card (Cinergy C PCI HD) and it is working very nice, I do not have any problems.
Now...
Thanks arzona! :thx:
I committed the fix yesterday so it should be in 1.2.0rc...
Thanks arzona! :thx:
I committed the fix yesterday so it should be in 1.2.0rc...
Hello gentlemen,
I'm puzzled about DVB-S USB tuner.
My plan is to find something to watch TéléSat broadcast in Belgium.
Here...
I have no problems anymore with 2x floppydtv+astoncrypt 2.18 and 2.23 firmware. Multidecode on both cards.
Have you seen this topic: https://forum.team-mediaportal.com/television-mytv-frontend-tv-server-90/floppydtv-fix-propblems-cam-stop-working-89726/
Greetings,
Wouter
I have no problems anymore with 2x floppydtv+astoncrypt 2.18 and 2.23 firmware. Multidecode on both cards.
Have you seen this...
Hello,
I want to use my dutch Canal Digitaal card with my new Digital Devices Cine S2 with CI-module.
The problem I'm facing...
No Problem :)
No Problem :)
I have cofigured a new TV Server 1.2.1.0 with a new Cine S2 V6 TV card including a CI module. The Card works well but I can not...
Unfortunately I am on MP1 still. Probably will not move to MP2 until a stable version is relased and my required useful plugins.
All I can say is that I cannot watch 2 separate crypted HD channels at the same time in MP1.
//Ulf
Unfortunately I am on MP1 still. Probably will not move to MP2 until a stable version is relased and my required useful plugins...
Hi, I am considering changing my TV cards so I can start to watch the Swedish provider Boxers HDTV.
The hardware I am...
Ok, so I keep running into an issue where I get "no signal" when I'm trying to scan for channels with my Duoflex+ Octopus CI setup, it's a bug that randomly seems to not be there, I had it working, but I was stupid enough to try and add a 2nd tuner, and then it showed back up, and now I'm screwed.
Ok, so I keep running into an issue where I get "no signal" when I'm trying to scan for channels with my Duoflex+ Octopus CI setup...
Hi everyone
I received my brand new Duoflex CT DVB PCIe card yesterday from DD and I installed it i my computer. But when I...
Hi Brian
Yes, I would say it will very likely be included in 1.3.0a.
If you ask me, the entire MP EPG system needs an overhaul. That might be part of it. We'll have to see what happens. As always, the shortage is in developers.
mm
Hi Brian
Yes, I would say it will very likely be included in 1.3.0a.
If you ask me, the entire MP EPG system needs an overhaul...
Hi all,
I've seen some similar posts to this but can find nothing for sale. There is a Geniatech X8000T PCI card in Amazon but...
I would be happy with the default recording device :)
I would be happy with the default recording device :)
Hello,
since a long time I try to bring up a WIN TV PCI running in MP. I allready installed several encoder / decoder but I...
Without being to detailed or sappy, my near-death to the waves of a pool at Splashtown in July gave me a new resolve to never take no for an answer. I've always been the kind of guy that won't let anyone tell him that he can't do something, but these days I'm just a machine when I set my mind to a task.
I've used MP since ~mid...
Without being to detailed or sappy, my near-death to the waves of a pool at Splashtown in July gave me a new resolve to never take...
I'm here because I am suspicious of my card. Feel free to correct me or have a mod move this to another forum where it will get...
mm is right, I never received a sample card. Plus, after sending couple of e-mails to TT and not becoming an answer, TT is lost for me. If they are showing such an "interest" to open source projects who are trying to support their products, then it's not worth the money (my opinion).
As an alternative, you can take a look at the new...
mm is right, I never received a sample card. Plus, after sending couple of e-mails to TT and not becoming an answer, TT is lost for...
Hi everyone :)
I recently bought this card: http://www.technotrend.eu/2990/TT-TVStick__CT2-4400.html and have some problems. Most...
Now I use Diseqc also. But only a diseqc 1.0 switcher (costed 8€) for 2 LNBs. MP 1.0.2 works flawlessly with my Technisat Skystar 2HD with this setup. Setup in MP TVServer was very easy. Switch between the 2 dishes is fast, nearly as fast as zapping o one dish. Another gratulation goes to MP Team!
Now I use Diseqc also. But only a diseqc 1.0 switcher (costed 8€) for 2 LNBs. MP 1.0.2 works flawlessly with my Technisat Skystar...
Any recommendation for a good DVB-S2 Card (with or without CI Slot?)
Currently I'm using a Hauppauge WinTV 88x Video Card, which...
Hello Tazzios
Which tuner please - the Twin (PCIe), or the single/older tuner (PCI)?
Make sure you click "update satellite list" before scanning - it looks like the tuning details may have changed recently.
If you still have problems then you can try to do a manual scan with the following parameters:
Frequency: 12129000 kHz
Symbol...
Hello Tazzios
Which tuner please - the Twin (PCIe), or the single/older tuner (PCI)?
Make sure you click "update satellite list"...
Hi,
using MediaPortal 1.1.3 with a KNC1 TV-Station DVB-S2 Twin the german SKY HD programs cannot be found. Using another card...
Hello all, I have to buy a new USB tv card and I would like to receive suggestions about which product I can take that works well with MediaPortal. I will use it in Italy and the features I am looking for are (top down from the most important requirement to the less imnportant):
1. dual DVB-T tuner
2. FM tuner
3. video in (composite...
Hello all, I have to buy a new USB tv card and I would like to receive suggestions about which product I can take that works well...
Hi,
I am looking to get a dual tuner DVB-T but not sure which to get?
I'll be installing MP on an XP machine and would like...
Thanks for the reply winterescape. I understand what your telling me. Do you just use yours for the free to air HD/digital channels? Mine only picks up like 20 :D anyway I have an old 150mce that works perfectly. But the cards don't seem to play nice together. I guess I'll just give up on this :(
Thanks for the reply winterescape. I understand what your telling me. Do you just use yours for the free to air HD/digital...
Well, I had seen several posts around the forums about having trouble getting this hybrid tuner to work with QAM. The most notable...
an final compiled version with installer had i not seen
only the code on Github there is an mm working branch
https://github.com/MediaPortal/MediaPortal-1/tree/EXP-TVE3.5-MP1-MP2_mm_working/TvEngine3/Mediaportal/TV/Server/TVLibrary/Implementations/SatIp
an final compiled version with installer had i not seen
only the code on Github there is an mm working branch...
Hi all,
With the WIP support for cableCard devices can we expect support for these too? :rolleyes...
Ah yeah I remeber that thread now - thanks. I will experiment later.
Ah yeah I remeber that thread now - thanks. I will experiment later.
Hello,
I'm looking for an tuner to be used with my ASRock ION HTPC. Since the device is very small I need an external USB tuner...
Hi mm1352000,
Many thanks for supplying the patch, I applied it but still only get 3 of each kind of input and still nothing on any of those inputs.
Attached log files as requested, what I noticed in the logs is that the TV Server detects the 2 crossbar filters and on both of those the 2 'Video_Composite' crossbar pins, this...
Hi mm1352000,
Many thanks for supplying the patch, I applied it but still only get 3 of each kind of input and still nothing on...
Hi all. Is anyone here using the new-ish Blackgold BGT3595 card? I have the older one which was just DVB-S but I fancy upgrading to...
Thanks, I did understand that Chuck, what I meant to say is that the resolution that is presented to the plasmascreen is not important because it is looked at from a distance, that is also why I want it to be fulscreen.
I am still steamin' around so just a short message and I am off again.
Please do not mistake my timeshortage for...
Thanks, I did understand that Chuck, what I meant to say is that the resolution that is presented to the plasmascreen is not...
I guess I have one of the simplest questions but I cannot find an answer after Google-ing all night.
I have a yellow plug and I...
to come back to original topic of the post. I continued my investigation there:
https://forum.team-mediaportal.com/tv-cards-333/cine-s2-ci-does-not-work-102198/index2.html#post818379
to come back to original topic of the post. I continued my investigation there...
Hi,
I am thinking getting rid or m'y floppy-dtv s2 and m'y nova-CI to get a new dual tuner dvbs2 card that would décode...
Good things? :eek: They seem to have significantly reduced their range of products, possibly because of comments like these:
https://www.amazon.co.uk/product-reviews/B004V2LKT8/ref=cm_cr_dp_hist_one?ie=UTF8&filterByStar=one_star&showViewpoints=0
But perhaps others have had better experiences?
-- from CyberSimian in the UK
Good things? :eek: They seem to have significantly reduced their range of products, possibly because of comments like these...
Am I right in thinking that to avoid a common issue of failed initialisation of tuners after waking from s3, its best to go for a...
I am moving to a tv server which only has USB support, so I have a FireDTV-C that I can't use anymore. If anyone wants to buy it, feel free to reply.
I am moving to a tv server which only has USB support, so I have a FireDTV-C that I can't use anymore. If anyone wants to buy it...
Dear Team Mediaportal members,
Dear Mediaportal users,
Dear friends,
after years of a good and friendly co-operation with the...
Just wanted to report back that I've had my new TBS 6618 card now for a few weeks and it's been working great. Tested with both MP1+patch and MP2. Thank you @FreakyJ and @mm1352000 for your help!
Just wanted to report back that I've had my new TBS 6618 card now for a few weeks and it's been working great. Tested with both...
Hi,
I current use TerraTec Cinergy C PCI HD CI, it is based on the legacy PCI interface which is not supported by modern mini-ITX...
I only use my HTPC for watching/listening. It doesn't get used to encode, my laptop does that overnight.
I only use my HTPC for watching/listening. It doesn't get used to encode, my laptop does that overnight.
So im a long time MP user and have a very stable setup with:
XP Pro (SP3)
MP1.0.1
DivX7 & CoreAVC codecs...
I'm using the stock drivers that came on the accompanied CD. However, I am still running XP Pro.
I'm using the stock drivers that came on the accompanied CD. However, I am still running XP Pro.
Well, now that I no longer have cable, my trusty Hauppage PVR500 can no longer service me. I need to find a new tuner card...