in addition:
this build.. keeps on recording to the default tvserver location and not to the location I have set in the configuration
I kept it running 24/7 since first install and is stable..
However.. my C drive is limited.. and with timeshift files and recording it would be game over sooner or later ;)
in addition:
this build.. keeps on recording to the default tvserver location and not to the location I have set in the...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
I have NA channels, but HD only with the 82 canada...do you want to know something else that I can help you?
Thanks!
Saticoyo
I'm sorry, my previous message was for STOKED!!
Saticoyo
I have NA channels, but HD only with the 82 canada...do you want to know something else that I can help you?
Thanks!
Saticoyo...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
I've random crashes of tv-server again with this build. While watching TV suddenly the tv-server service just stops. This happens with every build last week. Crashes are random, can't see any pattern in this. Logs are attached.
I've random crashes of tv-server again with this build. While watching TV suddenly the tv-server service just stops. This happens...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
After testing build 17368 and 17378 with the issue of HD not working except the audio, I've tried some older builds but without much luck with scheduled recording or playback stutter. So I tried this one. I have no problem with recording in .TS (haven't tested yet MPG) and scheduled recording and also finally HD is back (i'm in NA)...
After testing build 17368 and 17378 with the issue of HD not working except the audio, I've tried some older builds but without...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Build 15304 has resolved stuttering/tearing and audio popping during DVB-T streaming using tsreader.ax. Channel changes are quicker then I ever remember and the timeshift buffer problem during channel changes seems to have been resolved.
I am using a multi-seat config with Nvidia PureVideo decoder all settings in MyTVPlugin have been...
Build 15304 has resolved stuttering/tearing and audio popping during DVB-T streaming using tsreader.ax. Channel changes are quicker...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
lol @ that quote from tomfrogger "just give me five minutes to fix this then we can watch telly" - I too find myself always saying this to my gf. :ooops:
Quick question for the SVN-updated. If I too want to jump on the SVN bandwagen and do frequent SVN updates, do i simply have to download the new SVN update, and run the exe, or...
lol @ that quote from tomfrogger "just give me five minutes to fix this then we can watch telly" - I too find myself always saying...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
I've had same issue with FireDTV first and Technorotrend C1500 as secondary. TT creates 0kb recordings if FireDTV tunes and records another mux first. What makes it weird, is that I can timeshift TT but recordings fail. And now recording and timeshifting are supposed to use the same routines.
While timeshifting woks, I did had...
I've had same issue with FireDTV first and Technorotrend C1500 as secondary. TT creates 0kb recordings if FireDTV tunes and records...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
please wait for the next public build. builds > 16265 should contain the correct fix. otherwise please report again. note that you will need to update _both_, MP AND TVServer to a build >16265 for the fix to work.
edit: after reading your logfiles, i'm not sure if you are having the same issue that has been fixed. please report...
please wait for the next public build. builds > 16265 should contain the correct fix. otherwise please report again. note that you...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
hi,
I found solution for my problem, I had in recording setting- recording folders, same folder set in recordings & timeshift, and that caused error.
Br, Janne
hi,
I found solution for my problem, I had in recording setting- recording folders, same folder set in recordings & timeshift...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Hi,
To all of you that wonder about "Your System does need MP's requirement!"!
Thats a detection to see if a fix which can cause issues it's not installed on your system, it doesn't work as it should yet, but it will very soon! So until then you can calm down ;)
Regards
Roy
Hi,
To all of you that wonder about "Your System does need MP's requirement!"!
Thats a detection to see if a fix which can...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Exactly.
I was guilty of venting my frustration about the way I saw the project going. I've been using MediaPortal for long enough now to realise that it does most of what I want it to do. Sure, I'm one of the lucky ones who has a setup that TV server works well on. However, if I didn't, I'd just have to stick with TV engine 2...
Exactly.
I was guilty of venting my frustration about the way I saw the project going. I've been using MediaPortal for long...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
my epg for bev is working fine i grab it from NBC-E but for some strange reason the data shows up 2 times when im in MP i see the info about the show 2 times. i don't know if its MP yet need to test it with default skin to see if the skin is doing that.
my epg for bev is working fine i grab it from NBC-E but for some strange reason the data shows up 2 times when im in MP i see the...
[SIZE="2"][FONT="Verdana"]General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some...
this "retry loop" should only wait if the slot state is "unknown". all other steps (cam inserted, cam ok) are not affected.
meanwhile I have removed this loop, but returning false as result. by this the upper components should retry by themselves.
I'll post a new tvlibrary and tswriter this evening to test it...
this "retry loop" should only wait if the slot state is "unknown". all other steps (cam inserted, cam ok) are not affected...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Tv Doesn't work after MP Idle for some time
Hi,
Snapshot runs perfectly after a reboot. If TV is then turned OFF in MP and MP is idle for about 10 min, TV doesn't work anymore. Mp freezes, and only killing the process helps. One time i got an error log, that database connection can't be established. When restarting TV-Service...
Tv Doesn't work after MP Idle for some time
Hi,
Snapshot runs perfectly after a reboot. If TV is then turned OFF in MP and MP...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
I tried to open the database on the client, but SQL server mgmnt would not open the TVDatabase.db3.
Should I edit the server? It feels like a client problem because it is working on all other clients.
On the working client the tsreader.log says audio pid 30 and video pid 40, is that correct for a Twinhan 3030 dvb-t CI?
/Niclas
I tried to open the database on the client, but SQL server mgmnt would not open the TVDatabase.db3.
Should I edit the server? It...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
It's written multiple times in your tv log file.
analog: failed to add audio compressor
YOU MUST INSTALL A SUPPORTED SOFTWARE ENCODER application for software cards to work.
Get WinDVR 3 trial...
It's written multiple times in your tv log file.
analog: failed to add audio compressor
YOU MUST INSTALL A SUPPORTED SOFTWARE...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Hi
does not know whether this is right, but, nevertheless, tv server should support skystar 2 now with scan fully, however, I must use DVB fixed with it it properly work
greet
led7
Hi
does not know whether this is right, but, nevertheless, tv server should support skystar 2 now with scan fully, however, I...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...
Ah of course it was the EPG grabber stupid me – thanks
I had the same problem where TVservice would stop working seemingly at random. You could still enter Management Console and it would show you “recording” when in fact it wasn’t. As soon as I go to MP and start TV everything just locks up (MP & TVservice)
I had grabbing...
Ah of course it was the EPG grabber stupid me – thanks
I had the same problem where TVservice would stop working seemingly at...
General Infos:
Please visit our Wiki-Guide before you try out this engine.
We also provide some tutorial videos which show...