Reply to thread

Message

<blockquote data-quote="edterbak" data-source="post: 821219" data-attributes="member: 69192">Hi logifuse,Trying to help you a bit.1st check Im thinking of is to see if AERO is enabled. It should be enabled, and if it is disabled it coulc result in the things you see.2nd thing I am thinking of is in the line of the ATI mobile card is not or barely handling the settings with de-interlacing.What you could do to check this is to start mediaportal in windowd mode. Start CCC next to it and check the GPU/MEM/Temp graph in the overclocking section. During playback, do you see the gpu utilisation go up to 70-90%? Remember to keep the window of MP as big/visible as possible in order to keep the gpu working. If the utilisation is as high as 90% at times, it is likely the settings for de-interlacing are just a little bit too ambitious. I would feel comfortable with a load up to 60-70% maxIn CCC unde the tab &quot;Video&quot; you should manally set the deinterlacing settings to the lowest possible at first. (weave??)All other settings like skin color, whiter whites and settings like shown below, etc... disable them all. If you see a good and clean image when all is disabled, you have found the problem and can start working from there to enable one by one depending on what you like. Me&nbsp; - personally - I have them all disabled, except for the 0-255 color settings and the de-interlacing setting i have set it to vector adaptive, because my hd5670 can handle it fine. <img src="http://www.volny.cz/hoborg/ccc.png" alt="" class="fr-fic fr-dii fr-draggable " style="" />I hope you will find the problem in the end.</blockquote>

[QUOTE="edterbak, post: 821219, member: 69192"] Hi logifuse, Trying to help you a bit. 1st check Im thinking of is to see if AERO is enabled. It should be enabled, and if it is disabled it coulc result in the things you see. 2nd thing I am thinking of is in the line of the ATI mobile card is not or barely handling the settings with de-interlacing. What you could do to check this is to start mediaportal in windowd mode. Start CCC next to it and check the GPU/MEM/Temp graph in the overclocking section. During playback, do you see the gpu utilisation go up to 70-90%? Remember to keep the window of MP as big/visible as possible in order to keep the gpu working. If the utilisation is as high as 90% at times, it is likely the settings for de-interlacing are just a little bit too ambitious. I would feel comfortable with a load up to 60-70% max In CCC unde the tab "Video" you should manally set the deinterlacing settings to the lowest possible at first. (weave??) All other settings like skin color, whiter whites and settings like shown below, etc... disable them all. If you see a good and clean image when all is disabled, you have found the problem and can start working from there to enable one by one depending on what you like. Me - personally - I have them all disabled, except for the 0-255 color settings and the de-interlacing setting i have set it to vector adaptive, because my hd5670 can handle it fine. [img]http://www.volny.cz/hoborg/ccc.png[/img] I hope you will find the problem in the end. [/QUOTE]

Verification